Honeywell LKS 310 Manual

Instruction Handbook
www.honeywell.com 1
LKS 310
Actuator for air dampers on multi-stage
and modulating burners
APPLICATION
The LKS 310 air damper actuator is designed to be fitted to
multi-stage or modulating oil and gas burners with fully
closed position.
CONTENTS
Application ........................................................................... 1
Description ........................................................................... 2
Features ................................................................................ 2
Specification ........................................................................ 2
Type overview ..................................................................... 2
Technical data ..................................................................... 3
Ordering information ............................................................ 3
Standards and approvals .................................................... 3
Accessories ........................................................................ 3
Dimensional drawing ........................................................... 4
Shaft versions ..................................................................... 4
Circuit diagrams .................................................................. 5
Installation ............................................................................ 7
Safety Guidelines ................................................................ 7
Commissioning and Inspection .......................................... 7
Safety Guidelines ................................................................ 7
Function control .................................................................. 7
Repairing and Disposal ....................................................... 7
EN1C-0114SZ20 R0506

LKS 310 Actuator for air dampers on multi-stage and modulating burners
2 www.honeywell.com
DESCRIPTION
A synchronous motor powers an output shaft and a backlashfree
cam shaft via a gear reducer.
The cam shaft operates limit and auxiliary switches. The position
at which one of the limit or auxiliary switches operates can be ad-
justed steplessly within the operating range using the associated
cam disc. Manually adjustable lever-operated cams or spindle-
driven cams, which can be adjusted with a screwdriver, are avail-
able.
FEATURES
Electric actuator up to 15 Nm
• Drive times: 3.5 ... 30 sec.
• Gearing can be decoupled
• Position indicator
• Easily adjustable limit and auxiliary switches
• Synchronous motor
• Particulary stable design in aluminium housing
Variants:
• clockwise or counter clockwise rotation
• with integrated electronic circuitry
• different shaft versions
SPECIFICATION
Type overview
Clockwise rotation 1)
Counter-clockwise rotation 1)
Legende
1) when viewing from direction A (see dimensional drawing)
2) see “Circuit diagrams”
3) see “Shaft versions”
4) at 50 Hz for 90°
at 60 Hz, Drive times are about 20 % shorter
5) under nominal conditions
under extreme conditions (e.g. +60 °C, 230V -15%) the torques will be 25% lower
6) +10% -15%; 50...60Hz
at -15%; torque reduced by approx. 20% at undervoltage
7) Standard: Lever-operated cam
Diagram 2) Shaft 3) Drive
time 4)
Load
torque 5)
Holding
torque
Voltage 6) Type Remarks 7)
Nr. Nr. sNm Nm V
S1 5D 30 15 10 230 LKS 310-15 (A-5D-30 S1) Spindle-driven cam
S12 5D 30 15 10 230 LKS 310-21 (A-5D-30 S12) Spindle-driven cam
S7 5B 30 15 10 230 LKS 310-22 (A-5B-30 S7)
S7 5B 10 10 10 230 LKS 310-24 (A-5B-10 S7.1)
S7 5B 15 15 10 230 LKS 310-25 (A-5B-15 S7.1)
S12 5D 7 7 7 110 LKS 310-34 (A-5D-7 S12.1) Spindle-driven cam
S7 5C 30 15 10 230 LKS 310-35 (A-5C-30 S7) IP54
Diagram 2) Shaft 3) Drive
time 4)
Load
torque 5)
Holding
torque
Voltage 6) Type Remarks 7)
Nr. Nr. sNm Nm V
S8 5A 3,5 3,5 3,5 230 LKS 310-10 (B-5A-3.5 S8)
S7 5C 3,5 3,5 3,5 230 LKS 310-17 (B-5C-3.5 S7.1)
S7 5B 15 15 10 230 LKS 310-31 (B-5B-15 S7.1)
S7 5B 10 10 10 230 LKS 310-32 (B-5B-10 S7.1)
EN1C-0114SZ20 R0506
honeyvell.energy

LKS 310 Actuator for air dampers on multi-stage and modulating burners
www.honeywell.com 3
Technical data Ordering information
LKS 310-15 A 5D - 30 S1
Circuit version
Drive time for 90°
3,5 s (3 Nm)
7 s (7 Nm)
10 s (10Nm)
15 s (15 Nm)
30 s (15 Nm)
Type of drive shaft
5A, 5B, 5C, 5D
see “Shaft versions”
Direction of rotation
Aclockwise
Bcounter-clockwise
Model
Series
Standards and approvals
Conformity
Honeywell certifies herewith that the actuator LKS 310 complies
with the following regulations and standards:
• Standards of European Union 73/23 EWG and 93/68 EWG
• EN 60730-1 : 1991 A1 and A11 : 1991
• EN60730-2-5 : 1991
Accessories
Potentiometer-retrofit sets only on request.
Housing robust aluminium housing with plastic
cover
Weight approx. 1.8 kg
Drive motor reversible synchronous motor
Clutch red lever,
separates gearing from motor
Gearing spur gearing, maintenance-free
Drive shaft steel
PCBs for all electrical functions, increased
conductor thickness wire cross-
section
Connection system terminal blocks
Fitting and fastening front of gear acts as contact area.
Fixing from outside via M5 or M6
screws, thread in housing
Switch point setting stepless cam setting, lever-operated
or spindle-driven cams; if spindle-
driven, with superimposed scale
Position indicator if desired the cover can contain a win-
dow and pointer, internally via a co-
running pointer and scale
Mains voltage 230 V -15% +10%
Mains frequency 50 Hz or 60 Hz
Safety class I VDE 0631
Power consumption 7...15 VA
Duty cycle Depending on motor, 50 to 70 %
in 2 minutes
Interference
suppression
N (according to VDE 0785)
Actuating angle 90°, in exceptional cases also larger
Mounting position any
Protection IP54, with appropriate design of the
cable entries, cover without window
(DIN 40050)
Cable entries 2 x PG11
Cable connection terminal block for 0.5 mm2(min.) and
2.5 mm2(max.)
Direction of rotation see “Type overview”
Torque and holding
torque
see “Type overview”
Drive times 3.5 ... 30 sec for 90°
Limit and auxiliary
switches
max. 7
operation with adjustable cam discs,
cams coloured in normal way:
blue fully closed position
orange low load
red high load
black spare switches for
additional functions
switching voltage
AC 24 .... 230 V
switching capacity
with inductive loads 250 VA
Ambient temperature operation 0....+60° C
transport and storage
-20....+60° C
CAUTION
Condensation, icing and exposure to water not
permitted
EN1C-0114SZ20 R0506

LKS 310 Actuator for air dampers on multi-stage and modulating burners
4 www.honeywell.com
Dimensional drawing
A
Shaft versions
see below
alternatively
Shaft versions
Version 5B
Version 5A Version 5C
Version 5D
EN1C-0114SZ20 R0506

LKS 310 Actuator for air dampers on multi-stage and modulating burners
www.honeywell.com 5
Circuit diagrams
S1
S3
S5
S7
S2
S4
S6
S7.2
EN1C-0114SZ20 R0506

LKS 310 Actuator for air dampers on multi-stage and modulating burners
6 www.honeywell.com
S8
S10
S12
S9
S11
EN1C-0114SZ20 R0506

LKS 310 Actuator for air dampers on multi-stage and modulating burners
www.honeywell.com 7
INSTALLATION
Safety Guidelines
1.Screw the housing cover securely in place to provide shock-
hazard protection on the actuator and all electrical connec-
tions.
2. Always lay the burner ignition cable separately and as remotely
as possible from the device and other cables.
3.Electromagnetic emissions must be checked on a case by
case basis.
COMMISSIONING AND INSPECTION
Safety Guidelines
Function control
For safety reasons the actuator should be tested on commission-
ing the installation as well as after a service or longer shut-down.
REPAIRING AND DISPOSAL
WARNING
• The regulations and standards applicable in each
particular case must be observed.
• Installation must only be carried out by qualified
technicians.
• Electrical wiring must comply with national and local
regulations.
• Disconnect the actuators completely from the
power supply when working close to terminals
and connections.
WARNING
• Commissioning and inspection may only be carried
out by qualified personnel.
• Carefully check all cabling and wiring prior to com-
missioning.
It is forbidden to do any repairing on actuator
LKS 310.
The distributor of the heating system assures the pro-
fessional disposol or the forwarding to the manufac-
turer for inspection.
EN1C-0114SZ20 R0506

LKS 310 Actuator for air dampers on multi-stage and modulating burners