HORI NSW-326 User manual

InstructionManual
Thankyouforpurchasingthisproduct.
Beforeusingthisproductpleasereadtheinstructionscarefully.
Afterreadingtheinstructionmanual,pleasekeepitforreference.
TableofContents
1
Caution・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 2
Included ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 3
Platform・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 3
Layout ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 4
HowtoConnect・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 5
MotionAimFunction ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 6
・WhatisMotionAim? ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 6
・HowtosetupMotionAim ・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 7
・MotionAimSensitivity・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 8
・QuickMotionAim ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 9
Adjustableanalogsticksensitivity ・・・・・・・・・・・・・・・・・・・・・12
・SnipeMode・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・12
・QuickMode・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 13
TurboFunctions ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・14
・HowtousetheTurboFunctions・・・・・・・・・・・・・・・・・・・ 14
・HowtochangeTurboSpeed・・・・・・・・・・・・・・・・・・・・・・・・ 15
・QuickTurbo ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・15
AssignMode ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・16
Headphone/MicJack ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・18
VolumeControls ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・18
MicOn/Off ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・19
DownloadApp・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・19
MainFeatures ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・19

*PleasecheckthatyourNintendoSwitch™isupdatedtothelatest
systemfirmware.
*Thisproductdoesnotsupportthefollowingfeatures.
・Gyroscope・Accelerometer・IRMotionCamera・PlayerLED・HDRumble
・HOMEButtonNotificationLED・NFC
Caution
Caution Parents/Guardians:
Pleasereadthefollowinginformationcarefully.
●Thisproductcontainssmallparts.Keepawayfromchildrenunder3
 yearsold.
●Keepthisproductawayfromsmallchildrenorinfants.Seekmedical
 attentionimmediatelyifanysmallpartsareswallowed.
●Longcord.Strangulationhazard.
●Keeptheproductawayfromdustyorhumidareas.
●Donotusethisproductifithasbeendamagedormodified.
●Donotgetthisproductwet.Thismaycauseanelectricshockor
 malfunction.
●Donotplacethisproductnearheatsourcesorleaveunderdirect
 sunlightforanextendedperiod.Overheatingmaycausemalfunction.
●DonottouchthemetalpartsoftheUSBplug.
●Donotapplystrongimpactorweightontheproduct.
●Donotpullroughlyorbendthecableoftheproduct.
●Donotdisassemble,modifyorattempttorepairthisproduct.
●Ifproductneedscleaning,useonlyasoftdrycloth.Donotuseany
 chemicalagentslikebenzeneorthinner.
●Donotusethisproductforanythingotherthanitsintendedpurpose.
 Wearenotresponsibleforanyaccidentsordamagesintheeventof
 useotherthantheintendedpurpose.
2

Important BeforeusingthisproductwiththeNintendoSwitch,pleaseread
thefollowinginstructionscarefully.
PleasecheckthatyourNintendoSwitch™isupdatedtothelatest
systemfirmware.
NintendoSwitch
*FunctionsasPCcontrollerthroughXInput.ThisproductdoesnotsupportDirectInput.
PC(XInput)
CompatibleHeadsets
Platform
Controller×1
Included
*AninternetconnectionisrequiredtoupdatetheNintendoSwitch™systemfirmware.
*APCandinternetconnectionisrequiredtodownloadandusethecompanionapp.
Windows®10
SupportedOS
XInput
InputStandard
USBPort(Type-A),InternetConnection
Systemrequirements
TheheadphonejackcannotbeusedwhenusingthisproductwithaPC.
NintendoSwitch
PC
3

ZLButton ZRButton
RButton
LButton
Headphone/Mic
Jack
MotionAimSwitch
FLButton
（SnipeButton）
FRButton
(QuickButton)
USBCable USBConnector
−Button
CaptureButton
D-Pad
LeftAnalogStick
(Functionsasthe
LeftAnalogStick
Buttonwhen
presseddown.)
TurboButton
＋Button
AButton
BButton
YButton
FunctionButton
XButton
HomeButton
RightAnalogStick
(Functionsasthe
RightAnalogStick
Buttonwhen
presseddown.)
MicOn/OffButton
MicMuteLED
TurboLED
MotionAimLED
FunctionLED
Layout
4

InserttheUSBconnectorofthecontrollertotheUSBportofthe
NintendoSwitchDock.
HowtoConnect
ToNintendoSwitchDockUSBport
*DonottouchtheLeftAnalogStick/RightAnalogStickoranyotherbuttonwhenconnectingtheUSBplug.
In-gamesettings
TheMotionAimfunctionisdifferentfromthegyrosensor/accelerationsensor
ontheJoy-Con™andNintendoSwitchProcontroller.
ThisproductmaynotoperateproperlyifthegyrosettingingameisturnedON.
TurnOFFthegyrosettingingamebeforeusingthisproductwithagamethat
supportsthegyrofunction.
OperationSettings
Operating
theGyro ON OFF
*Imageforillustrativepurposesonly.
5

MotionAim
*TheMotionAimfunctionisdifferentfromthegyrosensor/accelerationsensorontheJoy-Con™and
NintendoSwitchProcontroller.
*ItispossibletoassignfunctionstotheLeftAnalogStickbyusingthecompanionApp.
〇WhatisMotionAim?
MotionAimallowstheRightAnalogStickinputtobecontrolledbytiltingthe
controller.
UsetheMotionAimfunctiontofinetunepreciseaimingandmovements.
Gotothenextpageforsetupinstructions.
6

DisabletheMotionAimfunction.
LEDOn
*1
LEDOff
*1TheMotionAimLED(blue)willbelitwheninuse.
LEDOn
*1
MotionAimLED
(Blue)
=
RightStick
Left&Right
=
RightStick
Left&Right
Theupanddownmotionsare
operatedthesameinbothmodes,
bytiltingthecontroller
forwardandbackward.
Up&Down
RightStick
=
MotionAimFunction①
MotionAimFunction②
【MotionAimFunctionSettings】
TherearetwomodesforMotionAimcontrol.Oneisfortiltingleftorrightwhenthe
controllerisheldvertically,theotherisfortiltingleftandrightwhenthecontroller
isheldhorizontally.
Positionof
theMotionAim
Switch
LEDStatus Settings
7

MotionAimsensitivitycanbeadjustedtothreelevels.
◆MotionAimSensitivity
Slow
Fast
Level1（SnipeMode）
Lowestsensitivity.
Allowspreciseaimingandmovementforlong
rangeaiming.
Level2（Normal）
Thisisthedefaultsensitivity.
Level3（QuickMode）
Highestsensitivity
Effectiveforquickaimingandmovements,
suchasforshort-rangeaiming.
*Bydefault,theMotionAimsensitivityissettoLevel2(Normal).
Operation LEDStatus Settings
Pushandhold
for3Seconds
StartSettings
*Whilesettingfunctions,
allbuttonsonthecontroller
willnotrespond.
Push
Settingscomplete
Level3（QuickMode）
Level2（Normal）
*Thissensitivitylevelisset
bydefault.
Level1（SnipeMode）
①
②
③
*1TheLeftAnalogStickmustbereturnedtotheneutralpositionbeforechangingthesettingagain.
*2TheMotionAimLED(Blue)willbelitwheninuse.
IfsettingsareadjustedwhiletheMotionAimselectorSwitchissetto"OFF",themotionaimLED(Blue)turnsoffinstep③.
*Ifnobuttonsarepressedat①andiftheLelftAnalogStickisnotmovedupordownformorethan4secondsat②,theFunction
LED(Red)willswitchoffandthesettingsfunctionwillclose.
*SensitivitywillbesetforbothMode1andMode2. *Settingswillbesavedevenifthecontrollerisunplugged.
MovetheLeftAnalogStick
upordown
*1
or
MovetheLeftAnalogStickupordownto
changethesensitivitybyonelevel.
MotionAimLED
(Blue)
FunctionLED
(Red)
SlowBlinking
SlowBlinking
SlowBlinking
SlowBlinking
LEDOff
LEDOff
3Blinks
2Blinks
1Blink
LEDOn
*2
SensitivityLevel2
(NormalMode)
SensitivityLevel3
(QuickMode)
SensitivityLevel1
(SnipeMode)
ControllerTilt
Input
8

QuickMotionAimFunction
IfoneofthebutonsissetasQuickMotionAim,theMotionAimFunctionwillbe
activeduringthatbuttonusageeveniftheMotionAimFunctionisturnedoff.
ConfigurableButtons
LButton/RButton/ZＬButton/ZＲButton/FLButton/FRButton
*IfyousettheQuickMotionAimFunctiononabutton,thebuttonwillbeusedincombinationwiththe
originalfunction.
IfyouwanttouseonlytheQuickMotionAimFunctionwiththesetbuttonandnottheoriginalfunction,
usetheAssignfunction(p.16)toassigntheoriginalfunctiontoNC(buttondoesnotrespond).
*TheQuickMotionAimFunctioncannotbesettomultiplebuttons.QuickMotionAimFunctionwillbeset
onlytothelastselectedbutton.
*TheMotionAimFunctionandQuickMotionAimFunctioncannotbeusedsimultaneously.
Seethefollowingpageforsetupinstructions.
Whilepressing
9

*1IfyousettheMotionAimSwitchto①or②,theQuickMotionAimFunctionwillbecomediasbledbuttheMotionAimFunctionwill
operatenormally.
*2TheFunctionLED(Red)andtheMotionAimLED(Blue)willstayonaslongastheQuickMotionAimFunctionissettoabutton.
*If4secondshavepassedwithoutpressinganybuttonsin②or③,theFunctionLED(Red)andtheMotionAimLED(Blue)will
automaticallyturnoffandthesettingfunctionswillclose.
*Settingswillbesavedevenifthecontrollerisunplugged.
【HowtosetupQuickMotionAim】
Operation LEDStatus Settings
PressAgain
①
MotionAimLED
(Blue)
FunctionLED
(red)
LEDOff LEDOff
Slow
Blinking
LEDOff
MotionAimSwitch
OFF*1
StartSettings
*WhensettingMotionAim
sensitivity,allbuttonson
thecontrollerwillnot
respond.
Settingscomplete
④LEDOn
*2
LEDOn
*2
Pushthebuttonthat
youwanttosetthe
QuickMotionAimFunctionto.
③
TherearetwomodesforMotionAimcontrol.Oneisfortiltingleftorrightwhenthe
controllerisheldvertically,theotherisfortiltingleftandrightwhenthecontroller
isheldhorizontally.
DisabletheMotion
Aimfunction.
Slow
Blinking
Slow
Blinking
②
=
RightStick
Left&Right
=
RightStick
Left&Right
Press2moretimes
Flashes
Quickly
Flashes
Quickly
or
Up&Down
RightStick
=
Theupanddown
operationsare
thesamefor
bothmodes.
*Thefunctionwillbesetto
thebuttonthatwaspressed
lastifmultiplebuttonsare
pressed.
10
Pushandhold
for3Seconds

【HowtoDisabletheQuickMotionAimFunction】
Operation LEDStatus Settings
*1TheQuickMotionAimFunctioncanonlybedisabledwhentheMotionAimSwitchisOFF.
 IftheMotionAimSwitchisswitchedto①or②,theQuickMotionFunctionwillnotbedisabledandthe
 MotionAimFunctionwillalwaysbeavailable.
*2TheFunctionLED(Red)willstaylitwhilethebuttonfunctionassignmentofoneormorebuttonsischanged
 fromthedefaultbythebuttonAssignModefunction.
*If4secondshavepassedwithoutpressinganybuttonsin②or③,theFunctionLED(Red)andtheMotionAim
LED(Blue)willautomaticallylightupandthesettingfunctionswillclose.
*Settingswillbesavedevenifthecontrollerisunplugged.
Settingscomplete
④LEDOff
*2
LEDOff
Pressthebuttonthatis
assignedasthe
QuickMotionAimFunction.
PresstheHOMEbutton.
or
PressAgain
Slow
Blinking
LEDOff
③
②
Slow
Blinking
Slow
Blinking
StartSettings
*Whilesettingfunctions,all
buttonsonthecontroller
willnotrespond.
①
MotionAimLED
(Blue)
FunctionLED
(Red)
LEDOn LEDOn
MotionAimSwitch
OFF*1
TheQuickMotionAim
Functionissettoone
ofthebuttons.
11
Pushandhold
for3Seconds

Adjustableanalogsticksensitivity
SnipeMode
WhilepressingtheFLButton(SnipeButton),thesensitivityoftheRightAnalog
Stickwilldecrease.
Thisisusefulforpreciselong-rangeaimingormakingprecisemovements.
◆SnipeModeSensitivity
AdjustthesensitivityoftheRightAnalogStickbypressingtheFLButton
(SnipeButton)andselectingoneofthethreelevelslistedbelow.
*Bydefault,thesensitivityissettoLevel2.
Slow
Fast
StickSensitivityLevel1
(Max.Output50%)
Greatlyloweredsensitivity.
StickSensitivityLevel2
(Max.Output70%)
Moderatelyloweredsensitivity.
Thissensitivitylevelissetbydefault.
StickSensitivityLevel3
(Max.Output85%)
Slightlyloweredsensitivity.
RightStickTilt
Input
Default
(Max.Output100%)
SensitivityLevel3
(Max.Output85%)
SensitivityLevel2
(Max.Output70%)
SensitivityLevel1
(Max.Output50%)
12
*WhilepressingtheSnipeButton,eveniftheRightAnalogStickistitledtothemax,thecontrollerwillnot
inputmorethanthesetsensitivity.
*ItispossibletoassignfunctionstotheLeftAnalogStickbyusingthecompanionApp.
Image:Long-RangeAiming
Default
Whenusing
SnipeMode
RightStickTilt
Input
Onlywhile
theFLButton
(SnipeButton)
ispushed
Seefollowingpageforsetupinstructions.

QuickMode
WhileholdingtheFRButton(QuickModeButton),movingtheRightAnalogStickevenalittle
enablesthesameinputaswhentheRightAnalogStickistiltedtothemaximuminput.
Effectiveforquickaimingandmovements,suchasforshort-rangeaiming.
*QuickModeisnotappliedtoMotionAim.
*ItispossibletoassignfunctionstotheLeftAnalogStickbyusingthecompanionApp.
13
Image:Short-RangeAiming
Default
WhenusingQuickMode
RightStickTilt
Input
Onlywhile
theFRbutton
(QuickButton)
ispushed
*1TheRightAnalogStickmustbereturnedtotheneutralpositionbeforechangingthesettingagain.
*2IftheTurboLED(Green)doesnotturnoff,itmeansatleastonebuttonhasTurboorTurboHoldenabled.
*If4secondshavepassedwithoutmovingtheRightAnalogStickupordownin②,allLEDswillautomaticallyturnoffandthe
settingfunctionswillclose.
*Settingswillbesavedevenifthecontrollerisunplugged.
Settingscomplete
③
LEDOffLEDOff
*2
Push
SlowBlinking
SlowBlinking
StickSensitivity2
(MaxInput70%)
*Thissensitivitylevelisset
bydefault.
StickSensitivity1
(MaxInput50%)
②
MovetheRightAnalogStick
upordown
*1
or
2Blinks
1Blink
SlowBlinking
StickSensitivity3
(MaxInput85%)
MovetheRightAnalogStickupordown
tochangethesensitivitybyonelevel.
3Blinks
Operation LEDStatus Settings
StartSettings
*Whilesettingfunctions,
allbuttonsonthe
controllerwillnot
respond.
①
SlowBlinkingLEDOff
FunctionLED
(Red)
TurboLED
(Green)
Pushandhold
for3Seconds

HowtousetheTurboFunctions
TheTurboHoldfunctionallowscontinuousrapidfirewithouthavingtoholdthebutton.
TheTurboandTurboHoldFunctioncanbesettomultiplebuttons.
AButton/BButton/XButton/YButton/D-Pad(Up/Down/Left/Right)/LButton/
RButton/ZLButton/ZRButton/LSBButton/RSBButton
*IftheabovebuttonfunctionsareassignedtotheFLorFRButton,theTurbofunctioncanbeassignedto
theFLorFRbuttons.
*TheD-PaddirectionsarenotcompatiblewiththeTurboHoldmode,andcanonlybesettoTurboMode.
*TurboFunctionmaynotfunctionasdesiredforallsoftwaretitles.
*IfthegameisexitedbypressingtheHOMEbutton,theTurboFunctionwillbedisabled.
Itwillneedtoberesetwhenthegameisreopened.
ThefollowingbuttonscanbesettoTurboorTurboHoldmode:
【HowtosetupTurboFunction】
Operation LEDStatus Settings
TurboMode:
Buttonissetto
continuouslyactivate
thebuttonfunction
aslongasyoupress
thebutton.
TurboHold:
Continuouslyactivates
thebuttonfunction
withoutpressingthe
button.
(Turbomodewillstopwhile
thebuttonispressed.)
TurboOFF
*1TheTurboLED(Green)willflashataratecorrespondingtotheTurbospeed.
*2ftTheTurboLED(Green)willstaylitorblinkingwhenotherbuttonsareusingTurboModeorTurboHold.
＋
HolddowntheTurbobutton
andthenpressthebuttonthat
youwanttosettoTurbomode
＋
Pushthebutton
thathasbeenassigned
rapidfireTurbo
HoldDown
theTurboButton
＋
PushtheTurboHoldbuttonwhile
pushingtheTurboButton
LEDOn
(Flasheswhilethe
buttonispressed.)
*1
Flashing
（Lightsupwhilethe
buttonispressed.）
*1
LEDOff
*2
TURBOLED
（Green）
Operation LEDStatus Settings
TurboOFF
＋
PushHOMEButtonHoldDownthe
TurboButton
【TurnoffallTurbo/TurboHoldsettings】
LEDOff
TURBOLED
（Green）
TurboFunctions
14

QuickTurbo
WhilepushingtheQuickTurboButton*1andanyofthefollowingbuttons,itwill
activatethebuttonfunctioncontinuously.
QuickTurboisusefulwhenneedingtousecontinuousbuttonfunctioninspecific
gamesituations.
ThefollowingbuttonscanbesettoTurboorTurboHoldmode:
AButton/BButton/XButton/YButton/D-Pad/LButton/RButton/ZLButton/
ZRButton/LSBButton/RSBButton
*1QuickTurboisnotassignedtoanybuttonbydefault.Toassignthe
 QuickTurboButtontoanotherassignablebutton,presstheTurbo
 Buttonin③ofHowtoAssignButtonFunctions.
TurboButton
*IftheabovebuttonfunctionsareassignedtotheFLorFRButton,theTurbofunctioncanbeassignedto
theFLorFRbuttons.
*Turbospeedissetto10times/secondbydefault.
YoucanadjusttheTurbomodeto3differentspeeds.
◆HowtochangeTurboSpeed
Operation LEDStatus Settings
*TheselectedTurbospeedisthesameforTurboMode,TurboHold,andQuickTurbo.
*Settingswillbesavedevenifthecontrollerisunplugged.
or
HoldDownthe
TurboButton
Pushthe+or‒Button
20
times/
second
10
times/
second
5
times/
second
TheTurboLEDwill
flashatarate
correspondingto
theTurbospeed
for2seconds.
WhileholdingdowntheTurboButton,
pressthe+Buttontoincreasethespeed
byonelevelorpressthe‒Buttonto
decreasethespeedbyonelevel.
TURBOLED
（Green）
15

Theassignablebuttonscanbeassignedtofollowingassignablefunctions.
AssignableButtons
AButton/BButton/XButton/YButton/D-Pad(Up/Down/Left/Right)/LButton/
RButton/ZLButton/ZRButton/LSBButton/RSBButton/-Button/+Button/
FLButton/FRButton
AssignableFunctions
AButton/BButton/XButton/YButton/D-Pad(Up/Down/Left/Right)/LButton/
RButton/ZLButton/ZRButton/LSBButton/RSBButton/-Button/+Button/
FLButton/FRButton/QuickTurboButton/NC(Buttonstopsresponding)
AssignMode
Operation LEDStatus Settings
①StartSettings
*Whilesettingfunctions,
allbuttonsonthecontroller
willnotrespond.
Pressthebuttonyouwantto
assignafunctionto.
②
Toassignthefunction,
pressthebuttonofthefunction
youwanttoassigntoin②.
Thefunctionis
assignedtothebutton
pressedin②,oritis
settoNC(buttonstops
responding)andthe
settingfunctionsclose.
Thebuttonofthe
functionyouwant
tochangeisselected.
*1TheFunctionLED(Red)isalwaysonwhilebuttonfunctionsarechangedfromdefault.
*If4secondshavepassedwithoutpressinganybuttonsin①or②,theFunctionLED(Red)willautomatically
turnoffandthesettingfunctionswillclose.
*Ifmultiplebuttonswerepressedin③,thefunctionofthelastbuttonpressedwillbeassigned.
*Settingswillbesavedevenifthecontrollerisunplugged.
③
or
Pressandholdthe
CaptureButtonfor3seconds
(tosetNC(disabled))
SlowBlinking
LEDOn
*1
FlashesQuickly
FunctionLED
(Red)
【HowtoAssignButtonFunctions】
16
Pushandhold
for3Seconds

*1TheFunctionLED(Red)willremainlitifthereareotherbuttonsthatarestillassignedfunctionsdifferent
fromtheirdefaultfunction.
*If4secondshavepassedwithoutpressinganybuttonsin①,theFunctionLED(Red)willautomaticallyturn
offandthesettingfunctionswillclose.
*Settingswillbesavedevenifthecontrollerisunplugged.
Operation LEDStatus Settings
①
StartSettings
*WhensettingMotionAim
sensitivity,allbuttonson
thecontrollerwillnot
respond.
Pressthebutton
youwouldliketo
returntodefaulttwice
②Thebuttonfunction
issettodefaultand
thesettingfunction
close.
ReturnOneButtonFunctiontoDefault
*If4secondshavepassedwithoutpressinganybuttonsin①,theFunctionLED(Red)willautomaticallyturn
offandthesettingfunctionswillclose.
*Settingswillbesavedevenifthecontrollerisunplugged.
Operation LEDStatus Settings
①StartSettings
*WheninSettingmode,all
buttonsonthecontrollerwill
notrespond.
PresstheHOMEbutton
②
Allbuttonfuntions
willreturntodefault
settingsandthe
settingfunctions
willclose.
【ReturnallButtonstoDefault】
SlowBlinking
LEDOff
*1
SlowBlinking
LEDOff
FunctionLED
(Red)
FunctionLED
(Red)
17
Pushandhold
for3Seconds
Pushandhold
for3Seconds

Headphone/MicJack
HeadphonesandheadsetscanbeconnectedbytheHeadphone/Micaudiojack.
Donotusehighvolumesettingsforanextendedperiodoftimetoavoid
hearingloss.
Beforeconnectingaheadset,besuretoturndownthevolumeonthe
NintendoSwitchand/orTV,asthesuddenhighvolumemayhurtyourears.
*Wheninuse,pleasedisconnectheadphonesorheadsetsfromtheNintendoSwitchordock.Ifa
USB-connecteddevice,suchasaheadset,headphone,orspeakerisconnected,soundwillonlycomefrom
thepreviouslyconnecteddevice.
*Whenusingaheadsetwiththisproduct,therewillbenosoundcomingfromtheTVorNintendoSwitch.
*WhenusingtheproductonaPC,theHeadphone/Micaudiojackcannotbeused.
*Somesoftwaretitlesdonosupportmicrophones.Pleasechecktheinstructionmanualofthesoftwaretitle
beforeusingthisproduct.
Operation Settings
Thevolumeoftheheadsetthatisconnectedcanbeadjusted.
*ThevolumecannotbeadjustedfortheNintendoSwitchorTVwiththisfunction.
VolumeControls
Asoundwillbeheardwhenthe
minimum/maximumvolumeisreached.
♪
HolddownthemicrophoneON/OFFbutton
andpressthe-button
HolddownthemicrophoneON/OFFbutton
andpressthe+button
Decrease
Volume
Increase
Volume
18

MainFeatures
：(W)150mm×(D)105mm×(H)60mm
：250g
：3.0m
ExternalDimensions
Weight
CableLength
TheconnectedheadsetmiccanbeturnedON/OFF.
MicOn/Off
Setupinstructions
MicOFF
MicON
LEDOn
LEDOff
MicMuteLED
(Orange)
Operation LEDStatus Settings
Push
『HORIDeviceManagerforNintendoSwitch』
PleasedownloadandinstalltheHORIDeviceManagerforNintendoSwitchfrom
thisproduct'swebsiteusingyourPC.
URL：https://stores.horiusa.com/horipad-for-nintendo-switch-1/
DownloadApp
ByusingtheHORIDeviceManager,allfunctionsofthisproductcanbeadjusted.
Windows®10
SupportedOS
19

PRODUCTDISPOSALINFORMATION
Whereyouseethissymbolonanyofourelectricalproductsorpackaging,it
indicatesthattherelevantelectricalproductorbatteryshouldnotbedisposedofas
generalhouseholdwasteinEurope.Toensurethecorrectwastetreatmentofthe
productandbattery,pleasedisposeoftheminaccordancewithanyapplicablelocal
lawsorrequirementsfordisposalofelectricalequipmentorbatteries.Insodoing,
youwillhelptoconservenaturalresourcesandimprovestandardsofenvironmental
protectionintreatmentanddisposalofelectricalwaste.ApplicabletoEUcountries
andTurkeyonly.
THEFCCWANTSYOUTOKNOW
Thisdevicecomplieswithpart15oftheFCCRules.Operationissubjecttothe
followingtwoconditions:(1)Thisdevicemaynotcauseharmfulinterference,and
(2)thisdevicemustacceptanyinterferencereceived,includinginterferencethat
maycauseundesiredoperation.
NOTE:Thisequipmenthasbeentestedandfoundtocomplywiththelimitsfora
ClassBdigitaldevice,pursuanttopart15oftheFCCRules.Theselimitsare
designedtoprovidereasonableprotectionagainstharmfulinterferenceina
residentialinstallation.Thisequipmentgenerates,usesandcanradiateradio
frequencyenergyand,ifnotinstalledandusedinaccordancewiththeinstructions,
maycauseharmfulinterferencetoradiocommunications.However,thereisno
guaranteethatinterferencewillnotoccurinaparticularinstallation.
Ifthisequipmentdoescauseharmfulinterferencetoradioortelevisionreception,
whichcanbedeterminedbyturningtheequipmentoffandon,theuseris
encouragedtotrytocorrecttheinterferencebyoneormoreofthefollowing
measures:
-Reorientorrelocatethereceivingantenna.
-Increasetheseparationbetweentheequipmentandreceiver.
-Connecttheequipmentintoanoutletonacircuitdifferentfromthattowhichthe
receiverisconnected.
-Consultthedealeroranexperiencedradio/TVtechnicianforhelp.
Thenormalfunctionoftheproductmaybedisturbedbystrongelectro-magnetic
interference.
Ifso,simplyresettheproducttoresumenormaloperationbyfollowingthe
instructionmanual(Howtoconnect).
Incasethefunctiondoesnotresume,pleaserelocatetoanareawhichdoesnot
haveelectro-magneticinterferencetousetheproduct.
Thewiresarenottobeinsertedintosocket-outlets.
Thepackagingmustberetainedsinceitcontainsimportantinformation.
EU and Turkey only