HORI Split Pad Compact User manual

Instruction Manual
Thank you for purchasing this product.
Before using this product please read the instructions carefully.
After reading the instruction manual, please keep it for reference.
2101-39US
From the Home Menu
Please check that your Nintendo Switch is
up to date before using this product.
Split Pad Compact
for Nintendo Switch™
Select ‘System’ and then
‘System Update’ to update to the
latest system firmware.
EN

TURBO Button (L)
ASSIGN Button (L)
L Button
ASSIGN LED(L)
D-pad
(Up/Down/Left/Right)
Left Stick
/ L Stick Button
- Button
A Button
B Button
TURBO LED(L)
Capture Button
ASSIGN Button (R)
TURBO Button (R)
TURBO LED(R)
Right Stick
/ R Stick Button
ASSIGN LED(R)
HOME Button
Y Button
X Button
＋Button
R Button
ZR Button
FR Button
Release Button
ZL Button
FL Button
Release Button
Controller (L) ×1 Controller (R) ×1 Instruction manual ×1
Included
Layout
Front View
Back View

Caution
！
- Please check that the Split Pad Compact is properly
attached to the Nintendo Switch™
Troubleshooting
* Check that the Nintendo Switch™ is up to date to the
latest system firmware
Do not touch any of the buttons
or sticks when turning on the
console, attaching, or registering
the controllers.
Nintendo Switch™
Troubleshooting
Platform

Assign mode allows you to assign button functions to the FL
and FR buttons.
*Cannot be assigned to multiple buttons at the same time
FL Button
Assignable buttons
L Button / ZL Button / L Stick Button
/ D-pad (UP, DOWN, LEFT or RIGHT)
/ - Button
R Button / ZR Button / R Stick Button
/ A Button / B Button / X Button
/ Y Button / ＋Button
FR Button
Assignable buttons
* Please use the ASSIGN Button (L) when setting button functions to FL Button.
Please use the ASSIGN Button (R) when setting button function to FR Button.
How to set up
Press the button
you want to
assign a function
to FL/FR
While pressing
ASSIGN Button
(L/R)
＋
A
ASSIGN LED
turns Red
LED
On
FR A
ASSIGN LED
LED
Off
FR A
Unassign
Press
FL/FR button
While pressing
ASSIGN Button
(L/R)
＋FR
Assign Mode

Turbo Mode
Turbo Mode will be
activated while the button
is pressed.
Turbo Mode
A
Turbo Mode can be set to 3 different speeds.
Turbo Hold
Continuously activates the
button function without
pressing the button.
Turbo Mode
A
* The Turbo LED (Green) will lash at a rate corresponding to the Turbo speed.
TURBO LED
turn Green
Setting up Turbo
function
TURBO LED
lashing (Green)*
Turbo function
activated
TURBO LED
Turbo / Turbo Hold Mode
The following buttons can be set to Turbo or Turbo Hold mode
Controller (L)
L Button / ZL Button / L Stick Button
/ D-pad (UP, DOWN, LEFT or RIGHT)*1
/ FL Button*2
Controller (R)
R Button / ZR Button / R Stick Button
/ A Button / B Button / X Button / Y Button
/ FR Button*3
*1 D-Pad (UP, DOWN, LEFT or RIGHT) is not compatible with the Turbo hold
mode, and can only be used to set Turbo mode.
*2 The FL Button will function only when a button function is assigned to it.
*3 The FR Button will function only when a button function is assigned to it.

How to set up Turbo Function
Turbo Mode
ON
①
Turbo Hold ON②
Turbo OFF
③
* Please use the TURBO Button (L) and the - Button when adjusting the
Turbo Speed on (L).Please use the TURBO Button (R) and the + Button
when adjusting the Turbo Speed on (R).
＋
While pressing
TURBO
Button (L/R)
The button that you
want to set to
Turbo mode
A
＋
Button pressed
in 
A
＋
Button pressed
in 
A
Turbo OFF
(All buttons) ＋
- or + Button
or
While pressing
TURBO
Button (L/R)
While pressing
TURBO
Button (L/R)
While pressing
TURBO
Button (L/R)

How to change Turbo Speed
Turbo mode can be set to 3 different speeds.
* When setting Turbo speed, Turbo LED (green) will lash at a rate
corresponding to the set Turbo speed.
* Turbo speed is set to 10 times/second by default.
* Analog Sticks must be returned to the neutral position before changing to
the next turbo speed.
20
times/second
10
times/second
5
times/second
Increase the speed
by one level
Decrease the speed
by one level
＋
While pressing
TURBO
Button (L/R)
Stick
＋
Stick
* Please use the TURBO Button (L) and the Left Stick when adjusting the
Turbo Speed on (L).Please use the TURBO Button (R) and the Right Stick
when adjusting the Turbo Speed on (R).
While pressing
TURBO
Button (L/R)

Caution Parents/Guardians: Please read
the following information carefully.
 This product contains small parts. Keep away from children under 3 years old.
 Keep this product away from small children or infants.
Seek medical attention immediately if any small parts are swallowed.
 Keep the product away from dusty or humid areas.
 Do not use this product if it has been damaged or modified.
 Do not get this product wet. This may cause an electric shock or malfunction.
 Do not place this product near heat sources or leave under direct sunlight for an
extended period. Overheating may cause malfunction.
 Do not apply strong impact or weight on the product.
 Do not disassemble, modify or attempt to repair this product.
 If product needs cleaning, use only a soft dry cloth.
Do not use any chemical agents like benzene or thinner.
 Do not use this product for anything other than its intended purpose.
We are not responsible for any accidents or damages in the event
of use other than the intended purpose.
：2.5in x 5.5 in x 1.6 in
：L approx 2.5 oz, R approx 2.5 oz
：Rail connector
(* This product is not wireless)
External Dimensions
Weight
Connection method
Main Features

THE FCC WANTS YOU TO KNOW
This device complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
EU and Turkey only
PRODUCT DISPOSAL INFORMATION
Where you see this symbol on any of our electrical products or
packaging, it indicates that the relevant electrical product or battery
should not be disposed of as general household waste in Europe. To
ensure the correct waste treatment of the product and battery, please
dispose of them in accordance with any applicable local laws or
requirements for disposal of electrical equipment or batteries. In so
doing, you will help to conserve natural resources and improve
standards of environmental protection in treatment and disposal of
electrical waste. Applicable to EU countries and Turkey only.
The packaging must be retained since it contains important information.

The image on the package may differ from the actual product.
The manufacturer reserves the right to change the product design or specifications without notice.
HORI and HORI logo are registered trademarks of HORI.
Nintendo Switch™ is a trademark of Nintendo. © 2022 Nintendo.
This is not a wireless controller.
Can only be used in portable mode.
Does not have the following functions.
Gameplay that require the following features may not work as desired with the Split Pad Compact.
・gyro sensors ・accelerometer ・motion sensors ・player LED・HD rumble ・notification light
・NFC touchpoint
US
Warranty
HORI warrants to the original purchaser that the product purchased new in its original packaging shall
be free of any defects in material and workmanship for a period of 1 year from the original date of
purchase. If the warranty claim cannot be processed through the original retailer please contact HORI
customer support directly at [email protected]. Please visit http://stores.horiusa.com/policies/ for
warranty details.
EU
Warranty
For all warranty claims made within the first 30 days after purchase, please check with the retailer
where the original purchase was made for details. If the warranty claim cannot be processed through
the original retailer or for any other inquiries pertaining to our products, please contact HORI customer
support directly at [email protected].
Simplified Declaration of Conformity
Hereby, HORI declares that this product is in compliance with Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the following internet address:
https://hori.co.uk/consumer-information/
For UK: Hereby, HORI declares that this product is in compliance with the relevant statutory requirements.
The full text of the declaration of conformity is available at the following internet address:
https://hori.co.uk/consumer-information/