CHAPTER2:
Console Instructions
SET UPXID ACCOUNT FOR VIAFIT™ CONNECTIVITY
Creating a xID account will allow you to save and share workout data using the ViaFit Wi-Fi. Up to four users can be saved
on a machine. This process is the first step in connecting your equipment. It must be done from a computer, tablet, or
mobiledevice.
1)
Visit the web site:
www.ViaFitness.com
2)
Once at the web site, select the CONNECT YOUR EQUIPMENT option on the top menu bar.
3)
The first step in connecting your equipment will to be creating your xID account. This will be your login to Via Fit.
4)
Enter your phone number or another easy-to-remember 10-14 digit number. This will be your account number.
5)
Fill in your profile information to finish the xID account set up process. You will be asked to provide an email address
not associated with any other xID account. Check your email after the set-up process for a link to validate your
account.
CONNECTWI-FI
Once you have created your xID account, you will be able to move on to activating the Wi-Fi on your equipment. Reminder,
this requires you to use your computer, tablet, or mobile device that is connected to the internet.
1)
Press and hold
for 3-5 seconds until you see the message ACTIVATED on yourscreen.
2)
On your computer or other device, go to your Wi-Fi settings. You should select the network with your model name.
Doing this enables you to connect your equipment to your wireless network.
3)
A new window will pop up with the list of wireless networks your equipment can see. Select your home Wi-Fi network
and connect.
4)
The remaining step is to reconnect your computer or other device back to your Wi-Fi network. Go to your settings again
and connect as you normallywould.
Congratulations! You are now connected and ready to get started.
2.3 GETTING STARTED & SELECTING A WORKOUT
1)
Check to make sure no objects are nearby that will hinder the movement of the elliptical.
2)
Plug in the powercord.
3)
Select your xID account, User, Guest, or Edit a User using
and press
ENTER
.
4)
When you log in for the first time as User 1-4, you will be prompted to enter your xID information.
a)
Enter your xID account number using
and press
ENTER
to select the numbers. Press
ENTER
after each input
to move to the next digit. After the final input, press
ENTER
.
b)
Enter your passcode using
to select the numbers. Press
ENTER
after each input to move to the next digit.
After the final input, press
ENTER
twice.
c)
If you key the incorrect number at any point while entering your xID or passcode, press and hold
CHANGE DISPLAY
for 3-5 seconds to clear the selection and begin again.
A) QUICK START
Simply press
START
to begin working out. Time will count up from 0:00. The resistance level will default to level 1.
B) SELECT APROGRAM
