horsch LEEB PT 350 Manual

Short instructions for lling LEEB PT 330/350
NOTE
The short instructions for operating the machine are only to be followed while taking into account
the safety notes and warnings in the corresponding operating instructions. Compensation claims
for damages due to non-observance of the operating instructions are excluded.
Art.: 80910221 en
1. Start PT 330/350
¾Switch on ignition
¾Press the start button
ignition
on/o󰘯
engine
start/stop
2. Open left side cover, connect suction hose
with 󰘰lling connection and open 󰘰lling valve.
valve
suction port
3. External control unit
¾Enter 󰘰lling limits
¾Start 󰘰lling
Stop
start 󰘰lling
con󰘰rm
navigate up/down
enter 󰘰lling limit
Filling stops automatically when the desired
value has been reached. Interruption via the
stop button is possible at any time.
4. Close the 󰘰lling valve, take o󰘯 suction hose
and close side cover.

Short instructions for spraying LEEB PT 330/350
NOTE
The short instructions for operating the machine are only to be followed while taking into account
the safety notes and warnings in the corresponding operating instructions. Compensation claims
for damages due to non-observance of the operating instructions are excluded.
Art.: 80910221 en
1. Fill the machine
2. Start PT 330/350
3. Enter l/ha setpoint value
4. Press button folding until the boom has expan-
ded completely
5. Activate folding boom control
6. Switch on circulation
7. Switch on main sprayer switch
main control page
l/ha setpoint
value folding menu
circulation
on/o󰘯
folding boom control
on/o󰘯
folding menu
folding
unfolding
main spraying
switch