horsch Terrano 3,5 FX User manual

READ CAREFULLY PRIOR TO STARTING UP!
KEEP OPERATING INSTRUCTIONS IN A SAFE PLACE!
ART.:
ISSUE:
OPERATING INSTRUCTIONS
80290205
10/2015
TERRANO 3/3,5/4/5/6 FX

EC Declaration of Conformity
exchangeable equipment
(RL 2006/42/EC)
The manufacturer HORSCH Maschinen GmbH
Sitzenhof 1
D-92421 Schwandorf
hereby declares, that the product,
Designation of machine: Cultivation tool
Machine type: Terrano 3 FX from serial no. 34934813
Terrano 3,5 FX from serial no. 34362342
Terrano 4 FX from serial no. 34943589
Terrano 5 FX from serial no. 34952132
Terrano 6 FX from serial no. 34461801
this declaration refers to, conforms with all relevant fundamental health and safety requirements
of the EC directive 2006/42/EC.
For proper implementation of the heath and safety requirements mentioned in the EC-directive,
the following standards and technical speci󰘰cations have been used:
EN ISO 4413 :04-2011
EN ISO 4414 :04-2011
EN ISO 4254-5 :05-2011
EN ISO 12100 :03-2011
Schwandorf, 14.10.2015 Documentation Representative:
Place and date Manfred Köbler
____________________ ____________________
M. Horsch P. Horsch
(CEO) (Development and Engineering)

Acknowledgement of receipt
No right to claim warranty if this acknowledgement of receipt has not been returned!
* Mandatory eld
To
Dealer
Cust. No.: .................................................
Company ..................................................*
Street: ......................................................*
ZIP-Code: ................................................*
Place: .......................................................*
Country: ...................................................*
Phone: .....................................................
Fax: ..........................................................
E-Mail: ......................................................
New machine sold to 󰘰nal customer - Initial use*
Customer's machine - Relocation*
Demonstration machine - Initial use*
Demonstration machine - Relocation*
Demonstration machine sold to 󰘰nal cus-
tomer - Use*
Machine type: ..........................................*
Serial number: ..........................................*
Service engineer
Name: ......................................................*
First name: ...............................................*
I hereby con󰘰rm the receipt of the operating instructions and spare parts list for the machine speci-
󰘰ed above.
I have been instructed by an authorized dealer or a Service Engineer from HORSCH in the opera-
tion and functions as well as the safety related requirements of the machine.
I am aware, that the right to claim warranty will only be e󰘯ective, if this form is returned to the
responsible dealer or handed over to the Service Engineer, properly completed immediately after
initial instruction.
........................................................................*
Signature of buyer
........................................................................*
Place, date of initial instruction
Customer I:
Name/company: ......................................*
Name of contact: .....................................*
First name of contact: ..............................*
Road: .......................................................*
ZIP-Code: ................................................*
Place: .......................................................*
Country: ...................................................*
Phone ......................................................*
Fax: ..........................................................
E-Mail: ......................................................*
Customer II:
Name/company: ......................................*
Name of contact: .....................................*
First name of contact: ..............................*
Road: .......................................................*
ZIP-Code: ................................................*
Place: .......................................................*
Country: ...................................................*
Phone ......................................................*
Fax: ..........................................................
E-Mail: ......................................................*
"

- Translation of the Original Operating Instructions -
Machine Identication
The corresponding data is to be entered into the list below upon
receiving the machine:
Serial number: ..................................................
Machine type: ...................................................
Year of construction: ........................................
Initial installation: ..............................................
Fittings: .............................................................
..........................................................................
..........................................................................
..........................................................................
Publication date of Operation Manual: 10/2015
Latest change: 04/2018
Address of Retailer: Name: ......................................................................
Road: ......................................................................
Town/City: ......................................................................
Tel.: ......................................................................
Customer No.:
Retailer: ......................................................................
Address of HORSCH: HORSCH Maschinen GmbH
92421 Schwandorf, Sitzenhof 1
92401 Schwandorf, Postbox 1038
Tel.: [phone] / 7143-0
Fax: [phone]
E-mail: [email protected]
Customer No.:
HORSCH: ......................................................................
80290205 Terrano 3-6 FX en

Table of contents
Introduction...................................................4
Foreword ........................................................4
Notes on representation .................................4
Service............................................................5
Warranty claim processing .............................5
Consequential damage...................................5
Safety and responsibility.............................6
Intended use...................................................6
Qualication of personnel...............................7
Children in danger ..........................................7
Personal protective equipment.......................8
Safety in trafc................................................8
Safety in operation..........................................9
Fertiliser and dressed seed ..........................12
Environmental protection..............................12
Retrots ........................................................12
Care and maintenance .................................13
Danger zone.................................................14
Safety stickers ..............................................15
Instruction stickers........................................18
Calculating the ballasting..............................19
Commissioning...........................................21
Delivery.........................................................21
Transport ......................................................21
Installation ....................................................21
Technical data.............................................22
Type plate.....................................................24
Design..........................................................27
Overview.......................................................27
Hydraulics.....................................................28
Lighting.........................................................30
Identication of hydraulic hoses ...................31
Aluminium clips.............................................31
Operation.....................................................32
Connecting ...................................................32
Transport position.........................................32
Parking .........................................................34
Folding..........................................................34
Depth setting ................................................35
Hydraulic depth setting (option).................36
Levelling discs ...........................................36
Support wheels..........................................37
Use in the eld..............................................38
Assembly groups .......................................39
Tines.............................................................39
MulchMix Coulters........................................39
Levelling discs ..............................................41
Packer ..........................................................41
Optional equipment....................................44
Brake system................................................44
Pneumatic brake........................................44
Hydraulic brake..........................................45
Parking brake.............................................46
MiniDrill.........................................................47
Hydraulically adjustable border discs
(3 / 3.5 FX / 4 FX rigid) .................................47
Harrow..........................................................48
Maintenance and Servicing .......................49
Cleaning .......................................................49
Lubricating machine .....................................49
Maintenance Periods....................................49
Storage.........................................................49
Maintenance overview..................................50
Lubrication points .........................................51
Coulter arrangement.....................................53
SteelDisc Packer - Replacing discs..............56
Tightening torques........................................57
Waste disposal ...........................................59
Index ............................................................60
2

3

Introduction
Foreword
Before commissioning the machine, read and
strictly comply with the operating instructions. In
doing so, you will avoid accidents, reduce repair
costs and downtime and increase the reliability
and service life of your machine. Pay attention
to the safety notes!
HORSCH will not assume liability for any dam-
age or malfunctions resulting from failure to
comply with the operating instructions.
These operating instructions will assist you in
getting to know your machine and in using it cor-
rectly for its intended purposes.
The operating instructions must be read and
strictly adhered to by all persons working on or
with the machine e.g.:
• Operation (including preparation, fault recti󰘰-
cation during work, care)
• maintenance (maintenance and inspection)
• Transport
You receive an acknowledgement of receipt to-
gether with the operating instructions. The trained
personnel of our service and sales partners will
train and instruct you in the operation and care
of your machine. You or the service engineer
should subsequently pass the acknowledgement
of receipt to the sales partner. This con󰘰rms your
formal acceptance receipt of the machine.
The warranty period starts with the date of delivery.
We reserve the right to alter illustrations as well
as technical data and weights contained in these
operating instructions for the purpose of improv-
ing the machine.
The illustrations in these operating instructions
show di󰘯erent versions of the implement and
di󰘯erent equipment variants.
Notes on representation
Warning notes
These operating instructions distinguish be-
tween three di󰘯erent types of warning notes.
The following signal words with warning sym-
bols are used:
DANGER
Highlights a danger that will lead to death or
severe injury if it is not avoided.
WARNING
Highlights a danger that can lead to death or
severe injury if it is not avoided.
CAUTION
Highlights a danger that can lead to injury if it
is not avoided.
Please read the warning notes given in these
operating instructions!
Instructions
NOTE
Identi󰘰es important notes.
Take-action instructions are indicated by arrow
points:
¾...
¾Keep the order of the instructions. Alternatively,
instructions may be numbered consecutively.
The designations right, left, front and rear apply as
seen in travel direction.
4

Service
HORSCH Company would like you to be completely
satis󰘰ed with your machine and our services.
If you encounter any problems, please feel free
to contact your sales partner.
The service sta󰘯 of our sales partners and the
service employees at HORSCH will always be
available for assistance.
In order to be able to solve technical problems
as quickly as possible, we ask you kindly to
support us.
Please help the service personnel by providing
the following information to avoid unnecessary
queries.
• Customer number
• Name of customer representative
• Name and address
• Machine model and serial number
• Purchasing date and operating hours or area
performance
• Type of problem
Warranty claim
processing
Warranty claim forms must be submitted to
HORSCH through your local HORSCH sales
partner.
Consequential damage
The machine has been manufactured by
HORSCH with greatest care. However, despite
the intended use deviations in placing quantity
up to total failure may be caused by e.g.:
• damage caused by external in󰘱uences
• wear of wear items
• missing or damaged cultivation tools
• incorrect travel speeds
• incorrect setting of the unit (incorrect connec-
tion, non-observance of setting tables)
• failure to comply with the operating instructions
• neglect and improper care and maintenance
Therefore, it is crucial to always check your ma-
chine before and during use for correct operation
and adequate application accuracy.
Compensation claims for damages which have
not been caused by the machine, are excluded.
This also means that any liability for consequen-
tial damages caused by travel and operating
faults is excluded.
5

Safety and
responsibility
The following warnings and safety notes apply
to all sections in these operating instructions.
The machine has been built in accordance with
latest technical standards and generally ac-
cepted safety regulations. However, risks for
life and limb of the operator or third parties and
impairment of the machine or other material as-
sets can occur during use.
Please read and comply with the following safety
notes, before you start to use the machine!
Intended use
The machine is intended for normal use in soil
cultivation in accordance with agricultural prac-
tice. Any other use or use beyond the limitations
of intended use, like e.g. as transport means,
is considered unintended use and can lead to
persons being severely or fatally injured.
HORSCH will not assume liability whatsoever for
damage resulting from unintended use. The risk
will be borne solely by the user.
The respective accident prevention regulations
of the agricultural liability associations and other
generally recognised safety-related, occupa-
tional medical and road tra󰘲c regulations are
to be adhered to.
The machine must only be operated in a techni-
cally perfect condition and in a safety and danger
conscious manner!
Faults, particularly those which impair safety,
must be remedied immediately.
The machine must only be operated, serviced
and repaired by persons who are familiar with
it and have been made aware of the dangers
involved, see "Quali󰘰cation of personnel".
Spare parts
Genuine spare parts and accessories from
HORSCH have been specially designed for this
machine.
Spare parts and accessories which are not deliv-
ered by us, have not been tested or approved by us.
Installation or use of non-original HORSCH
products may have a detrimental effect on
speci󰘰c design features of the machine and
impair the safety of machine operators and the
machine itself.
HORSCH will not assume liability whatsoever for
damage resulting from the use of non-original
parts and accessories.
If the component to be replaced is marked with
a safety sticker, these stickers must also be
ordered and attached to the spare part.
Operating Instructions
Intended use also includes the strict compliance
with the operating instructions and adherence to
the operating, maintenance and repair instruc-
tions speci󰘰ed by the manufacturer.
The operating instructions are a part of the machine!
The machine is solely intended for use as de-
scribed in the operating instructions. Failing to
comply with the operating instructions can result
in severe or even fatal physical injuries.
¾Read and follow the corresponding sections in
the operating instructions before starting work.
¾Store the operating instructions and keep for
future use.
¾Pass the operating instructions on to a later
user. When selling on into countries with di󰘯er-
ent languages, pass on in the corresponding
o󰘲cial language.
6

Qualication of personnel
Unintended use of the machine can lead to se-
vere or even fatal physical injuries. In order to
prevent accidents, each person involved in work
with the machine must meet the following general
minimum requirements:
¾The person must be physically able to keep
the machine under control.
¾The person is able to perform work with the
machine safely within the scope of these op-
erating instructions.
¾The person is acquainted with the function of
the machine within the scope of its work and
is able to assess and avoid any work related
dangers. The person is able to recognize and
avoid work related dangers.
¾The person has understood the operating
instructions and is able to implement the in-
formation given in the operating instructions
accordingly.
¾The person is fully familiar with the safe opera-
tion of the vehicle.
¾The person knows all applicable road tra󰘲c
regulations and is in possession of a valid
driving permit for road travels.
¾A person being instructed must only work with
or on the machine under the supervision of
an experienced person.
The owner of the machine must
¾regulate the area of responsibility, compe-
tence and monitoring of personnel.
¾if necessary train and instruct the personnel.
¾make the operating instructions accessible for
the machine operator.
¾ensure that the operator has read and under-
stood the operating instructions.
Groups of operators
Persons who work with the machine must have
been trained for the di󰘯erent activities involved.
Instructed operators
These persons must have been trained for their
respective activities by the owner or other quali-
󰘰ed experts. This refers to the following activities:
• Road transport
• Application and set-up work
• Operation
• Maintenance
• Troubleshooting and repair
Operators trained by HORSCH
Furthermore, for certain activities the corre-
sponding personnel must have been trained by
service personnel from HORSCH. This refers to
the following activities:
• Loading and transport
• Commissioning
• Troubleshooting and repair
• Waste disposal
Certain work concerning maintenance and repair
must only be carried out by an expert workshop.
Such work is identi󰘰ed with the additional com-
ment "Workshop work".
Children in danger
Children are not able to assess dangers and may
behave unpredictably. Children are therefore
especially endangered:
¾Keep children away from the machine.
¾Especially when starting to drive and before
triggering machine movements you must make
sure that the danger zone is free of children.
¾Shut down the tractor before leaving it.
Children can trigger dangerous machine
movements. An insu󰘲ciently secured ma-
chine parked without being attended poses
a danger for playing children!
7

Personal protective
equipment
Missing or incomplete protective equipment
increases the risk of health damage. Personal
protective equipment includes, e.g.:
¾tight 󰘰tting clothes / protective clothing, pos-
sibly a hair net
¾safety shoes
¾safety gloves
¾Safety goggles to protect the eyes against
dust or spray, when working with fertiliser or
liquid fertiliser (follow the instructions of the
fertiliser manufacturer)
¾Respiratory masks and protective gloves when
handling dressing or dressed seed (follow the
instructions of the pickling agent manufacturers)
¾Determine the personal protective equipment
for the corresponding work place.
¾Provide effective protective equipment in
proper condition.
¾Never wear rings, bracelets or other jewellery.
Safety in trafc
DANGER
No passengers are allowed to ride on the
machine!
¾Pay attention to the permissible transport
widths and heights. Pay attention to the trans-
port height when passing under bridges and
low hanging overhead power lines.
¾Do not exceed the permissible axle loads, tyre
load bearing capacities and total weights, in
order to ensure su󰘲cient steering and braking
capabilities. The front axle must be loaded
with at least 20 % of the tractor weight.
For road transport the machine must be set to
transport position. The machine must have been
folded up and secured, see chapter "Folding" and
"Hitching up and transport position".
¾Clean soil from the folding areas before fold-
ing up. Otherwise there could be damage to
the mechanics.
¾If present: Secure the hydraulic cylinders on
undercarriage and drawbar in transport posi-
tion against uncontrolled movements using
aluminium clips, see chapter “Connecting and
transport position”.
¾Assemble lighting, warning and protective
features and check the function.
¾Before driving on roads clean the entire ma-
chine from picked up dirt.
Handling is a󰘯ected by the connected equipment.
¾Pay particular attention to the wide overhang
and the centrifugal mass of the working imple-
ment when cornering.
Raised machine (Three-point hydraulics):
¾Consider the limited stability and steerability
of the tractor.
¾For transport on public roads pay attention to
the permissible top speed mentioned in the
operating licence!
¾The speci󰘰cations in the type approval docu-
ment or in the technical data are decisive for
the design dependent top speed.
¾Always match the travel mode to the road
conditions to avoid accidents and damage to
the undercarriage.
¾Consider your personal abilities, carriage way,
tra󰘲c, sight and weather conditions.
8

Safety in operation
Commissioning
The operational safety of the machine cannot
be guaranteed without an orderly performed
commissioning. This can lead to accidents with
severe or even fatal physical injuries.
¾The machine must only be put into operation
after receiving instructions by employees of the
authorized dealer or a HORSCH employee.
¾The machine registration form must be com-
pleted and returned to HORSCH.
All protective features and safety equipment,
such as detachable protective devices (wheel
chocks, etc.), must be correctly in place and
reliably functioning before the machine is put
into operation.
¾Check nuts and bolts, especially the ones on
wheels and cultivation tools regularly for tight
󰘰t and retighten if necessary.
¾Check the tyre pressure at regular intervals,
see maintenance overview.
Damage to the machine
Damage to the machine can impair the op-
erational safety of the machine and cause ac-
cidents. This can lead to severe or even fatal
physical injuries.
The following machine parts are particularly
important for safety:
¾Hydraulics
¾Brakes (if available)
¾Connecting features
¾Protective features
¾Lighting
If in doubt about the safety relevant status of the
machine, e.g. in case of leaking out operating
󰘱uids, visible damage or unexpected changes
in travel behaviour:
¾Immediately shut down and secure the machine.
¾If possible locate and rectify the faults by fol-
lowing these operating instructions.
¾Rectify possible causes for damage (e.g. re-
move coarse dirt and tighten loose screws).
¾Have damage, that could a󰘯ect safety and
that cannot be recti󰘰ed by yourself, recti󰘰ed
by a quali󰘰ed expert workshop.
Hitching and unhitching
Faulty coupling of the machine to the pulling tool
of the tractor causes dangers, which could result
in severe accidents.
¾Strictly comply with all operating instructions:
• These operating instructions
• Operating instructions of the tractor
¾Exercise special caution when reversing the trac-
tor. Never stand between tractor and machine.
¾Only park the machine on a 󰘰rm and level sur-
face. Before unhitching the towed machine,
lower it to the ground.
¾Secure the machine against rolling away.
9

Hydraulics
The hydraulic system is under high pressure.
Escaping 󰘱uid can penetrate the skin and cause
serious injuries. In the event of injury, consult a
doctor immediately.
The machine's hydraulic system has several
functions, which can cause injury to persons or
damage to the machine if operated incorrectly.
¾Do not connect hydraulic hoses to the tractor
before both hydraulic systems on machine
and tractor are de-pressurised.
¾Lower all hydraulically lifted parts (e.g. wings,
packer, undercarriage, etc.) to the ground
before performing any work on the hydraulic
system. Depressurise the hydraulics on the
tractor and implement side.
¾The hydraulic system is under high pressure.
Check all lines, hoses and screwed con-
nections regularly for leaks and any visible
external damage!
¾Use only appropriate means when searching
for leaks. Repair any damage immediately!
Oil sprays can cause injuries and 󰘰re!
¾Power sockets and connectors on the hydrau-
lic connections should be marked in order to
exclude operating errors.
¾In the case of injury, contact a doctor imme-
diately!
¾Secure and lock the control unit on the tractor
if not in use!
¾Replace hydraulic hoses at the latest after six
years, see Maintenance overview.
Pressure accumulator
The hydraulic system may be equipped with
pressure accumulators.
¾Do not open or work (welding, drilling) on
pressure accumulators. Even when empty,
the tanks are still preloaded by gas pressure.
The hydraulic system must be depressurized
before maintenance!
Brake system
Depending on the equipment, the machines can
be equipped with a pneumatically or hydrauli-
cally operated service brake system.
For road travel the brake system must always
be connected and fully functional.
¾After hitching the machine and before trans-
portation you should always check the func-
tion and condition of the brake system.
¾Check the setting on the brake pressure
regulator.
¾Always release the parking brake before start-
ing to drive.
¾Always secure the machine against rolling
away and apply the parking brake before
unhitching.
Adjustments and repair work on the brake sys-
tem must only be carried out in a professional
workshop or by an operator, who has been
specially trained by HORSCH.
Overhead lines
When unfolding or folding the wings, the ma-
chine may reach the height of overhead power
lines. Possible voltage 󰘱ashover to the machine
causing fatal electric shock or 󰘰re.
¾Keep a safe distance to electric high voltage
power lines with the folded up machine or when
unfolding or folding the machine.
¾Do not unfold or fold the wings in the vicinity
of pylons and power lines.
¾Never leave or access the machine under
overhead power lines to avoid possible risks
of electric shock or voltage 󰘱ashover.
10

What to do in case of voltage ashover
Voltage 󰘱ashover generates high electric volt-
ages on the outside of the machine. This results
in extreme voltage di󰘯erences at the ground
around the machine. Wide strides, laying on the
ground or supporting yourself with your hands
on the ground can cause life-threatening electric
currents (pace voltage).
¾Do not leave the cabin.
¾Do not touch any metal objects.
¾Do not create a conductive connection to ground.
¾Warn persons: DO NOT come near the ma-
chine. Electric voltages at the ground can
cause severe electric shock.
¾Wait for professional rescuers. The overhead
power line needs to be switched o󰘯.
If persons need to leave the cabin despite the
voltage 󰘱ashover, e.g. in case of a potential life-
threatening risk of 󰘰re:
¾Jump away from the machine. Ensure a safe
stand when jumping. Do not touch the outside
of the machine.
¾Move away from the machine with short step-
ping strides.
Technical limiting values
If the technical limiting values of the machine
are not complied with, the machine may get
damaged. This can lead to accidents with severe
or even fatal physical injuries.
The following technical limiting values are of
particular importance for safety:
• permissible total weight
• maximum axle loads
• maximum drawbar load
• top speed
See chapter "Technical data", type plate and
type approval.
¾Also pay attention to the max. permitted loads
for the tractor.
Use in the eld
DANGER
No passengers are allowed to ride on the
machine!
¾Check the area immediately around the machine
(for children!) before driving o󰘯 and commission-
ing the machine. Ensure su󰘲cient visibility.
¾Ensure su󰘲cient stability of the machine in
case of longitudinal or transverse inclination
when working in uneven terrain. Pay attention
to the limiting values for the tractor.
¾Do not remove any of the mandatory and
supplied protective devices.
¾Stay clear of the operating range of hydrauli-
cally operated parts.
¾Do not drive backwards with the machine
lowered. The components have only been
designed for forward travel in the 󰘰eld and
may be damaged when reversing.
Changing equipment / wear items
¾Secure the machine against unintended roll-
ing away!
¾Secure raised frame parts you have to work
under with suitable supports!
¾Caution! Danger of injury caused by projecting
parts (e.g. coulters)!
Do not use packer tyres or other rotating parts
to climb on the machine. These could rotate and
you could be seriously injured by falling down.
11

Fertiliser and dressed seed
Inappropriate handling of fertiliser and dressed
seed can cause poisoning and death.
¾Follow the information given in the safety data
sheet of the manufacturer. If necessary ask the
dealer for the corresponding safety data sheet.
¾Determine and provide the personal protective
out󰘰t as speci󰘰ed by the manufacturer.
Environmental protection
Operating materials such as hydraulic oil, lubri-
cants, etc. can damage the environment and the
health of persons.
¾Do not allow operating materials to drain out
into the environment.
¾Take up drained operating materials with
absorbent material or sand, 󰘰ll it into a leak
tight tank and dispose of in accordance with
statutory regulations.
Retrots
Structural changes and extensions can adverse-
ly a󰘯ect the functionality and the operational
safety of the machine. This can lead to severe
or even fatal physical injuries.
¾Do not make any structural changes or ex-
tensions to the machine that have not been
approved by HORSCH.
¾Structural changes and extensions must only
be made in an authorized workshop or by an
operator who has been trained by HORSCH.
¾Comply with country speci󰘰c instructions for
weights, weight distribution and dimensions.
For equipment in󰘱uencing the weight or weight
distribution one must check and comply with the
regulations concerning towing facilities, support
and axle loads.
For machines without brakes a brake system
may need to be retro󰘰tted if the permissible
weight limits are exceeded.
In case of changes concerning data mentioned
on the type plate, a new type plate with updated
data must be attached.
In case of changes which concern the data in
the type approval, this type approval needs to
be renewed.
12

Care and maintenance
Inappropriate care and maintenance puts the
operational safety of the machine at risk. This
can lead to accidents with severe or even fatal
physical injuries.
¾Conform with prescribed schedules for repeti-
tive tests or inspections.
¾Service the machine according to the main-
tenance plan, see chapter "Care and main-
tenance".
¾Only perform the work described in these
operating instructions.
¾Before starting maintenance and service work
park the machine on level and 󰘰rm ground and
secure it against rolling away.
¾De-pressurise the hydraulic system and lower
or support the implement.
¾Prior to working on the electrical system,
disconnect it from the electric current supply.
¾Before cleaning the machine with high pres-
sure cleaning equipment cover all openings,
which should stay clear of water, steam or
cleaning agents for reasons of safety or
operation. Do not aim the water jet directly
on electric or electronic components and
bearings.
¾When cleaning with high pressure or steam
cleaning equipment keep a distance of at least
50 cm to machine components.
¾After cleaning, check all hydraulic lines for
leaks and loose connections.
¾Check for cha󰘰ng and signs of other damage.
Remedy any faults immediately!
¾Screw connections loosened for the purpose
of care and maintenance work must be
retighten after work is completed.
¾All other maintenance and repair tasks,
which are not described in the operating
instructions, must only be carried out by
an authorized professional workshop or
by an operator who has been trained by
HORSCH for this purpose.
Do not clean new machines with a steam
jet of a high pressure cleaner. The paint
takes approx. 3 months to cure and could
thus be damaged if this time has not yet
expired.
13

Danger zone
The area marked red indicates the danger zone
of the machine:
The danger zone around the machine poses the
following endangerments:
¾Accidental operation of the hydraulic system
can trigger dangerous movements of the
machine.
¾Defective or not correctly fastened electric
lines can cause electric shocks.
¾With the drive still running, machine parts may
rotate or swing out.
¾Hydraulically raised machine parts can lower
slowly and unnoticed.
Failing to pay attention to the danger zone can
result in severe or even fatal physical injuries.
¾Do not stand under lifted loads. Lower such
loads to the ground 󰘰rst.
¾Instruct persons to leave the danger zone
around the machine and tractor.
¾Before working in the danger zone of the ma-
chine or between machine and tractor: Shut
down the tractor!
This also applies for short-term inspection work.
Many accidents happen because of care-
lessness and running machines!
¾Pay attention to the information in all operat-
ing instructions.
14

Safety stickers
Safety stickers on the machine warn of hazards
at dangerous points and are an important part
of the safety equipment of the machine. Miss-
ing safety stickers increase the risk of severe or
even fatal physical injuries.
¾Clean soiled safety stickers.
¾Damaged or illegible safety stickers must be
replaced immediately.
¾Provide spare parts with the speci󰘰ed safety
stickers.
No passengers are allowed to
ride on the machine!
00380054
Before commissioning the ma-
chine you should read and fol-
low the operating instructions!
00380055
Watch out for 󰘱uids spraying out
under high pressure, follow the
operating instructions!
00380133
Never reach into areas where
there is a risk of crushing, as long
as parts could still be moving!
00380134
Stay clear of swinging area of
retractable and extendible ma-
chine parts!
00380135
When hitching up the machine
and when operating the hydrau-
lic system, no persons should
be between the machines.
00380145
Shut the engine down and pull
o󰘯 the key before starting main-
tenance and repair work.
00380294
Do not climb on rotatable parts.
Use mounting steps provided
for this purpose.
00380299
15

Position of safety stickers
(depending on equipment)
Terrano 3 FX / 3.5 FX
00380054
00380055
00380294
00380953
00380145
00380299
Fig. Terrano 3 FX
The pressure accumulator is
charged with gas or oil pres-
sure. Dismantle and repair
only in strict compliance with
the instructions in the technical
manual.
00380252
Remaining in the danger zone
is only permitted when the lifting
cylinder pin is inserted.
00380896
Remaining in the danger zone
is only permitted if the safety
support is in place.
00380953
16