HP 11792A User manual

HP11792A
SENSORMODULE
SERIAL NUMBERS
This manual applies directly to instruments with serial
numbers prefixed 2407A.
For additional important information about serial
numhers, refer to “Instruments Covered by Man-
ual” in Paragraph 3.
First Edition
@HEWLETT-PACKARD COMPANY 1984
EAST 24001 MISSION AVENUE, TAF c-34, SPOKANE, WASHINGTON, U.S.A., 99220
HEWLETT
PACKARD

COPYRIGHT AND DISCLAIMER NOTICE
Copyright - Agilent Technologies, Inc. Reproduced with the permission of Agilent
Technologies Inc. Agilent Technologies, Inc. makes no warranty of any kind with regard
to this material including, but not limited to, the implied warranties of merchantability
and fitness for a particular purpose. Agilent Technologies, Inc. is not liable for errors
contained herein or for incidental or consequential damages in connection with the
furnishing, performance, or use of this material or data.

Model 11192A SensorModule
This Operating and Service Manual contrins information about initial inspection,operation,performance
tcsl~s,adjusl:~,wnt.s,troubleshooting,and repair of the HP Model 117921%Sensor Module.
2. Specifications
Inst~rument specifications are listed in Table I. ‘Thesespecifications are the performance standardsor
limits against which the instrument can be tested. The supplemental characteristics listed in Table 2 are
not specificationsbut are t.ypicalcharacteristicsincluded asadditional information for the user.
Characteristics
Power Range
Frequency Range
Linearity
Table 1. Specificications
Performance limits Conditions
-20 dBm to +30 dBm (10 PW to 1W)
50 MHz to 26.5 GHz
50 MHZ to 16 GHz Option 001
+2%, -4% t20 dBm to f30 dBm
<+20 dBm
Input SWR Sensor Module connected to a” HP 6901 B
or HP 6902A and HP 11793A
RF Power <1.40
Cl .26
<I.10
16 GHz to 26.5 GHz: Except Option 001
2 GHz to 18 GHz
50 MHz to 2 GHt
Tuned RF Level Cl .43 16 GHz to 26.5 GHz: Except Option 001
e1.32 1.3 GHz to 18 GHz; Except Option 001
Cl -35 1.3 GHL to 18 GHz; Option 001 Only
Cl.15 50 MHZ to 1.3 GHz: Except Option 001
11.10 50 MHz to 1.3 GHz; Optlon 001 Only