HP Model 744 - VME Workstation Reference guide

set variables for use by snf2 scripts snf2 utility functions general utility functions preload arrows and handle rollovers and
dropdowns
pci module - 4 slot
declaration of conformity
according to ISO/IEC Guide 22 and EN 45014
manufacturer:
Hewlett-Packard Company
29 Burlington Mall Road
Burlington, MA 01803
USA
declares, that the:
Product Name: PCI Module - 4 Slot
Product Number: A4980A & A4505A
Product Options: all
conforms to the following specifications:
safety IEC 60950:1991 +A1+A2+A3+A4 / EN 60950:1992+A1+A2+A3+A4+A11
UL 1950 3rd Edition
EMC
CISPR 22: 1993 / EN 55022: 1994 +A1 +A2 Class A
EN 55024:1998
U.S.A. FCC Part 15, Level A
Australia/New Zealand AS/NZS 3548
supplementary information:
The product herewith complies with the requirements of the following Directives and carries the CE
marking accordingly:
- the EMC directive 89/336/EEC and 92/31/EEC and 93/68/EEC
- the Low Voltage Directive 73/23/EEC and 93/68/EEC
This product was tested in a Model 745/165 Hewlett-Packard Industrial Controller.
signature on file dated March 23, 2001
Walter Bochnik, Systems Manager
for compliance information ONLY, contact:
European Contact: Your local Hewlett-Packard Sales and Service Office or Hewlett-Packard GmbH, Department HQ-TRE
Standards Europe, Herrenberger Straße 130, D-71034 Böblingen (FAX: [phone])
Americas Contact: Hewlett-Packard, Burlington System Manager, 29 Burlington Mall Road, Burlington, MA 01803, USA
privacy statement using this site means you accept its terms © 1994-2003 hewlett-packard company
declaration pci
file:///C|/HP Docs pending/week of 4-21/vme/htmls/declaration pci.htm [5/2/2003 9:05:16 AM]