HP MSR SERIES Installation manual
HP MSR Router Series
Fundamentals
Command Reference(V7)
Part number: 5998-6354
Software version: CMW710-R0106
Document version: 6PW101-20140807
i
Legal and notice information
© Copyright 2014 Hewlett-Packard Development Company, L.P.
No part of this documentation may be reproduced or transmitted in any form or by any means without
prior written consent of Hewlett-Packard Development Company, L.P.
The information contained herein is subject to change without notice.
HEWLETT-PACKARD COMPANY MAKES NO WARRANTY OF ANY KIND WITH REGARD TO THIS
MATERIAL, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
AND FITNESS FOR A PARTICULAR PURPOSE. Hewlett-Packard shall not be liable for errors contained
herein or for incidental or consequential damages in connection with the furnishing, performance, or use
of this material.
The only warranties for HP products and services are set forth in the express warranty statements
accompanying such products and services. Nothing herein should be construed as constituting an
additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.
i
Contents
Legal and notice information·········································································································································i
Basic CLI commands ···················································································································································· 1
command-alias enable·············································································································································1
command-alias mapping ·········································································································································1
display | { begin | exclude | include }·················································································································2
display | by-linenum ················································································································································3
display > ···································································································································································4
display >>·································································································································································5
display command-alias ············································································································································6
display history-command ·········································································································································6
display history-command all····································································································································7
display hotkey···························································································································································7
hotkey ········································································································································································9
quit ·············································································································································································9
return······································································································································································· 10
screen-length disable············································································································································· 10
system-view ···························································································································································· 11
RBAC commands ·······················································································································································12
description······························································································································································ 12
display role ···························································································································································· 12
display role feature ··············································································································································· 16
display role feature-group ···································································································································· 18
feature····································································································································································· 21
interface policy deny ············································································································································ 21
permit interface······················································································································································ 22
permit vlan ····························································································································································· 24
permit vpn-instance ··············································································································································· 25
role·········································································································································································· 27
role default-role enable········································································································································· 28
role feature-group·················································································································································· 28
rule ·········································································································································································· 29
super ······································································································································································· 33
super authentication-mode···································································································································· 33
super password ····················································································································································· 34
vlan policy deny ···················································································································································· 36
vpn-instance policy deny ······································································································································ 37
Login management commands ·································································································································39
activation-key ························································································································································· 39
authentication-mode ·············································································································································· 40
auto-execute command ········································································································································· 41
command accounting············································································································································ 43
command authorization········································································································································ 44
databits··································································································································································· 45
display line····························································································································································· 45
display telnet client················································································································································ 48
display user-interface ············································································································································ 48
display users ·························································································································································· 51
ii
escape-key······························································································································································ 52
flow-control····························································································································································· 53
free line··································································································································································· 54
free user-interface ·················································································································································· 56
history-command max-size ··································································································································· 58
idle-timeout ····························································································································································· 59
ip alias···································································································································································· 60
line ·········································································································································································· 61
line class································································································································································· 62
lock·········································································································································································· 64
parity······································································································································································· 65
protocol inbound ··················································································································································· 66
redirect disconnect ················································································································································ 67
redirect enable······················································································································································· 67
redirect listen-port ·················································································································································· 68
redirect passthrough·············································································································································· 69
redirect refuse-negotiation ···································································································································· 69
redirect timeout ······················································································································································ 70
screen-length ·························································································································································· 71
send ········································································································································································ 72
set authentication password································································································································· 74
shell········································································································································································· 75
speed ······································································································································································ 75
stopbit-error intolerance········································································································································ 76
stopbits···································································································································································· 77
telnet ······································································································································································· 78
telnet client source ················································································································································· 78
telnet ipv6······························································································································································· 79
telnet server acl······················································································································································ 80
telnet server dscp··················································································································································· 81
telnet server enable ··············································································································································· 82
telnet server ipv6 acl············································································································································· 82
telnet server ipv6 dscp ·········································································································································· 83
terminal type ·························································································································································· 84
user-interface·························································································································································· 84
user-interface class ················································································································································ 86
user-role ·································································································································································· 88
FTP commands····························································································································································90
FTP server commands ···················································································································································· 90
display ftp-server···················································································································································· 90
display ftp-user······················································································································································· 91
free ftp user ···························································································································································· 91
free ftp user-ip ························································································································································ 92
free ftp user-ip ipv6 ··············································································································································· 92
ftp server acl ·························································································································································· 93
ftp server dscp ······················································································································································· 94
ftp server enable···················································································································································· 94
ftp server ipv6 dscp··············································································································································· 95
ftp server ssl-server-policy ····································································································································· 95
ftp timeout······························································································································································· 96
FTP client commands······················································································································································ 97
append ··································································································································································· 97
ascii········································································································································································· 97
binary ····································································································································································· 98
iii
bye ·········································································································································································· 99
cd ············································································································································································ 99
cdup······································································································································································100
close······································································································································································101
debug ···································································································································································101
delete ····································································································································································102
dir··········································································································································································103
disconnect ····························································································································································104
display ftp client source ······································································································································105
ftp ··········································································································································································105
ftp client source····················································································································································106
ftp client ipv6 source···········································································································································107
ftp ipv6 ·································································································································································108
get ·········································································································································································109
help ·······································································································································································110
lcd ·········································································································································································111
ls············································································································································································112
mkdir·····································································································································································113
newer····································································································································································113
open······································································································································································114
passive··································································································································································115
put ·········································································································································································115
pwd·······································································································································································116
quit ········································································································································································117
reget······································································································································································117
rename··································································································································································118
reset ······································································································································································119
restart····································································································································································119
rhelp······································································································································································120
rmdir ·····································································································································································121
rstatus····································································································································································122
status ·····································································································································································124
system ···································································································································································125
user ·······································································································································································125
verbose ·································································································································································126
? ············································································································································································127
TFTP commands······················································································································································· 129
tftp ·········································································································································································129
tftp client source···················································································································································130
tftp ipv6 ································································································································································131
tftp client ipv6 source··········································································································································133
tftp-server acl························································································································································134
tftp-server ipv6 acl ···············································································································································134
File system management commands ····················································································································· 136
cd ··········································································································································································136
copy ······································································································································································137
delete ····································································································································································140
dir··········································································································································································141
file prompt ····························································································································································143
fixdisk····································································································································································143
format····································································································································································144
gunzip···································································································································································144
gzip·······································································································································································145
iv
md5sum ································································································································································146
mkdir·····································································································································································146
more······································································································································································147
mount ····································································································································································148
move ·····································································································································································149
pwd·······································································································································································149
rename··································································································································································150
reset recycle-bin···················································································································································150
rmdir ·····································································································································································151
sha256sum ··························································································································································151
umount ··································································································································································152
undelete································································································································································153
Configuration file management commands ·········································································································· 154
archive configuration ··········································································································································154
archive configuration interval ····························································································································155
archive configuration location ···························································································································156
archive configuration max··································································································································157
backup startup-configuration······························································································································158
configuration encrypt ··········································································································································159
configuration replace file····································································································································160
display archive configuration·····························································································································160
display current-configuration······························································································································161
display default-configuration······························································································································162
display saved-configuration ·······························································································································163
display startup ·····················································································································································164
display this ···························································································································································165
reset saved-configuration····································································································································166
restore startup-configuration·······························································································································167
save·······································································································································································168
startup saved-configuration ································································································································171
Software upgrade commands································································································································ 173
boot-loader file·····················································································································································173
boot-loader update··············································································································································175
bootrom update ···················································································································································176
display boot-loader ·············································································································································177
version auto-update enable································································································································179
version check ignore···········································································································································180
Emergency shell commands ··································································································································· 182
copy ······································································································································································182
delete ····································································································································································183
dir··········································································································································································183
display copyright·················································································································································185
display install package·······································································································································185
display interface m-eth0 ·····································································································································186
display ip routing-table ·······································································································································188
display ipv6 routing-table···································································································································189
display version·····················································································································································190
format····································································································································································190
ftp ··········································································································································································191
install load····························································································································································191
interface m-eth0···················································································································································192
ip address ····························································································································································193
ip gateway ···························································································································································193
v
ipv6 address ························································································································································194
ipv6 gateway·······················································································································································195
mkdir·····································································································································································195
more······································································································································································196
move ·····································································································································································196
ping·······································································································································································197
ping ipv6······························································································································································198
pwd·······································································································································································199
quit ········································································································································································199
reboot ···································································································································································199
reset ssh public-key··············································································································································200
rmdir ·····································································································································································201
shutdown ······························································································································································201
ssh2·······································································································································································202
system-view ··························································································································································203
telnet ·····································································································································································203
tftp ·········································································································································································204
Automatic configuration commands ······················································································································ 205
autodeploy udisk enable ····································································································································205
Device management commands ···························································································································· 206
card-mode ····························································································································································206
clock datetime······················································································································································207
clock protocol ······················································································································································208
clock summer-time ···············································································································································209
clock timezone·····················································································································································210
command······························································································································································211
copyright-info enable ··········································································································································212
display alarm ·······················································································································································213
display clock ························································································································································214
display copyright·················································································································································215
display cpu-usage················································································································································216
display cpu-usage configuration························································································································217
display cpu-usage history ···································································································································217
display device······················································································································································220
display device manuinfo·····································································································································222
display device manuinfo fan······························································································································224
display device manuinfo power ························································································································225
display diagnostic-information ···························································································································226
display environment ············································································································································226
display fabric utilization ·····································································································································228
display fan ···························································································································································229
display memory ···················································································································································230
display memory-threshold···································································································································231
display power-supply ··········································································································································232
display scheduler job··········································································································································233
display scheduler logfile·····································································································································233
display scheduler reboot ····································································································································234
display scheduler schedule·································································································································235
display transceiver alarm ···································································································································236
display transceiver diagnosis·····························································································································239
display transceiver interface ······························································································································240
display transceiver manuinfo ·····························································································································241
display version·····················································································································································242
vi
display version-update-record ····························································································································242
header ··································································································································································243
job·········································································································································································245
memory-threshold ················································································································································245
monitor cpu-usage enable ··································································································································247
monitor cpu-usage interval ·································································································································248
password-recovery enable ·································································································································248
power-supply off ··················································································································································249
power-supply on ··················································································································································250
power-supply policy enable ·······························································································································250
power-supply policy redundant··························································································································251
reboot ···································································································································································252
remove··································································································································································254
reset scheduler logfile ·········································································································································255
reset version-update-record ································································································································255
restore factory-default··········································································································································255
scheduler job ·······················································································································································256
scheduler logfile size···········································································································································257
scheduler reboot at ·············································································································································258
scheduler reboot delay ·······································································································································259
scheduler schedule ··············································································································································259
shutdown-interval·················································································································································260
sysname································································································································································261
time at···································································································································································262
time once······························································································································································262
time repeating······················································································································································264
transceiver phony-alarm-disable ························································································································265
usb disable···························································································································································266
user-role ································································································································································266
Tcl commands·························································································································································· 268
tclsh·······································································································································································268
tclquit ····································································································································································268
Support and other resources ·································································································································· 270
Contacting HP ······························································································································································270
Subscription service ············································································································································270
Related information······················································································································································270
Documents····························································································································································270
Websites·······························································································································································270
Conventions ··································································································································································271
Index ········································································································································································ 273
1
Basic CLI commands
command-alias enable
Use command-alias enable to enable the command keyword alias function.
Use undo command-alias enable to disable the command keyword alias function.
Syntax
command-alias enable
undo command-alias enable
Default
The command keyword alias function is disabled.
Views
System view
Predefined user roles
network-admin
Usage guidelines
Configured command keyword aliases take effect only when the command keyword alias function is
enabled.
Disabling the command keyword alias function does not delete configured aliases.
Examples
# Enable the command keyword alias function.
<Sysname> system-view
[Sysname] command-alias enable
Related commands
•command-alias mapping
•display command-alias
command-alias mapping
Use command-alias mapping to configure a command keyword alias.
Use undo command-alias mapping to delete a command keyword alias.
Syntax
command-alias mapping cmdkey alias
undo command-alias mapping cmdkey
Default
A command keyword has no alias.
2
Views
System view
Predefined user roles
network-admin
Parameters
cmdkey: Specifies the first keyword of a non-undo command or the second keyword of an undo
command. You must enter the keyword in its complete form.
alias: Specifies an alias for the keyword. It must be different from the first keyword of any non-undo
command and the second keyword of any undo command.
Usage guidelines
You can configure an alias for the first keyword of a non-undo command or the second keyword of an
undo command. Then, when you execute a command that starts with the keyword or the undo keyword
plus the keyword, you can use the alias. For example, if you configure show as the alias for the display
keyword, you can enter show clock to execute the display clock command.
To use configured command keyword aliases, make sure the command-alias enable command is
configured.
Examples
# Define show as the alias of the display keyword.
<Sysname> system-view
[Sysname] command-alias mapping display show
Related commands
•command-alias enable
•display command-alias
display | { begin | exclude | include }
Use display | { begin | exclude | include } to filter the output from a display command with a regular
expression.
Syntax
display command |{ begin | exclude | include } regular-expression
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
command: Specifies the keywords and arguments of a display command. To display available keywords
and arguments, enter display ?.
begin: Displays the first line matching the specified regular expression and all subsequent lines.
exclude: Displays all lines not matching the specified regular expression.
3
include: Displays all lines matching the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Usage guidelines
Use the | { begin | exclude | include } regular-expression option with a display command to filter the
command output. For more information about regular expressions, see Fundamentals Configuration
Guide.
Examples
# Display the lines that contain "vlan" in the running configuration.
<Sysname> display current-configuration | include vlan
vlan 1
vlan 999
port access vlan 999
display | by-linenum
Use display | by-linenum to number each output line for a display command.
Syntax
display command |by-linenum
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
command: Specifies the keywords and arguments of a display command. To display available keywords
and arguments, enter display ?.
Usage guidelines
By numbering each output line from a display command, you can easily identify the lines of interest.
Each line number is displayed as a 5-character string and might be followed by a colon (:) or hyphen (-).
If you specify the | by-linenum option and the | begin regular-expression option for a display command,
a hyphen is displayed for all lines that do not match the regular expression.
Examples
# Display VLAN 999 settings, with each output line identified by a number.
<Sysname> display vlan 999 | by-linenum
1: VLAN ID: 999
2: VLAN type: Static
3: Route interface: Configured
4: IP address: 192.168.2.1
5: Subnet mask: 255.255.255.0
6: Description: For LAN Access
7: Name: VLAN 0999
8: Tagged ports: None
4
9: Untagged ports:
10: GigabitEthernet2/1/0
# Display the first line that begins with "user-group" in the running configuration and all of the following
lines.
<Sysname> display current-configuration | by-linenum begin user-group
114: user-group system
115- #
116- return
display >
Use display >to save the output from a display command to a separate file.
Syntax
display command > filename
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
command: Specifies the keywords and arguments of a display command. To display available keywords
and arguments, enter display ?.
filename: Specifies the name of the file that is used to save the output, a string of 1 to 63 characters.
Usage guidelines
The display commands show the configuration, statistics, and states of the device. You can use the
display >command to save the output to a file.
If the specified file does not exist, the system creates the file and saves the output to the file. If the file
already exists, the system overwrites the file.
Examples
# Save VLAN 1 settings to a separate file named vlan.txt.
<Sysname> display vlan 1 > vlan.txt
# Verify the content of the vlan.txt file.
<Sysname> more vlan.txt
VLAN ID: 1
VLAN type: Static
Route interface: Not configured
Description: VLAN 0001
Name: VLAN 0001
Tagged ports: None
Untagged ports:
GigabitEthernet2/1/0
5
display >>
Use display >> to append the output from a display command to the end of a file.
Syntax
display command >> filename
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
command: Specifies the keywords and arguments of a display command. To display available keywords
and arguments, enter display ?.
filename: Specifies the name of the file that is used to save the output, a string of 1 to 63 characters.
Usage guidelines
The display commands show the configuration, statistics, and states of the device. You can use display >>
to save the output to a file.
If the specified file does not exist, the system creates the file and saves the output to the file. If the file
already exists, the system appends the output to the end of the file.
Examples
# Append the VLAN 999 settings to the end of the vlan.txt file.
<Sysname> display vlan 999 >> vlan.txt
<Sysname>
# Check the content of the vlan.txt file.
<Sysname> more vlan.txt
VLAN ID: 1
VLAN type: Static
Route interface: Not configured
Description: VLAN 0001
Name: VLAN 0001
Tagged ports: None
Untagged ports:
GigabitEthernet2/1/0
VLAN ID: 999
VLAN type: Static
Route interface: Configured
IP address: 192.168.2.1
Subnet mask: 255.255.255.0
Description: For LAN Access
Name: VLAN 0999
Tagged ports: None
Untagged ports:
6
GigabitEthernet2/1/1
display command-alias
Use display command-alias to display the status of the command keyword alias function and the
configured command keyword alias.
Syntax
display command-alias
Views
Any view
Predefined user roles
network-admin
network-operator
Examples
# Display command keyword alias information.
<Sysname> display command-alias
Command alias is enabled
Index Alias Command key
1 ping1 ping
2 ssh1 ssh
Related commands
•command-alias enable
•command-alias mapping
display history-command
Use display history-command to display all commands that are saved in the command history buffer for
the current CLI session.
Syntax
display history-command
Views
Any view
Predefined user roles
network-admin
network-operator
Usage guidelines
The system automatically saves commands you have successfully executed to the command history buffer
for the current CLI session. You can view them and execute them again.
By default, the system can save up to 10 commands in the buffer. You can use the history-command
max-size command to change the buffer size.
7
Examples
# Display all commands saved in the command history buffer for the current CLI session.
<Sysname> display history-command
system-view
vlan 2
quit
Related commands
history-command max-size
display history-command all
Use display history-command all to display all commands saved in the command history buffer for all
CLI sessions.
Syntax
display history-command all
Views
Any view
Predefined user roles
network-admin
network-operator
Usage guidelines
The system automatically saves commands successfully executed by users to the command history buffer
for all CLI sessions. Users can view them and execute them again.
Up to 1024 commands can be saved in the command history buffer. When this number is reached, the
system deletes the earliest commands to make room for newly executed commands.
Examples
# Display all commands saved in the command history buffer for all CLI sessions.
<Sysname> display history-command all
Date Time Terminal Ip User
03/16/2012 20:03:33 vty0 192.168.1.26 **
Cmd: display history-command all
03/16/2012 20:03:29 vty0 192.168.1.26 **
Cmd: system-view
Related commands
display history-command
display hotkey
Use display hotkey to display hotkey information.
Syntax
display hotkey
8
Views
Any view
Predefined user roles
network-admin
network-operator
Examples
# Display hotkey information.
<Sysname> display hotkey
----------------- Hotkeys -----------------
-Defined command hotkeys-
CTRL_G display current-configuration
CTRL_L display ip routing-table
CTRL_O undo debugging all
-Undefined command hotkeys-
CTRL_T NULL
CTRL_U NULL
-System-reserved hotkeys-
CTRL_A Move the cursor to the beginning of the line.
CTRL_B Move the cursor one character to the left.
CTRL_C Stop the current command.
CTRL_D Erase the character at the cursor.
CTRL_E Move the cursor to the end of the line.
CTRL_F Move the cursor one character to the right.
CTRL_H Erase the character to the left of the cursor.
CTRL_K Abort the connection request.
CTRL_N Display the next command in the history buffer.
CTRL_P Display the previous command in the history buffer.
CTRL_R Redisplay the current line.
CTRL_V Paste text from the clipboard.
CTRL_W Delete the word to the left of the cursor.
CTRL_X Delete all characters from the beginning of the line to the cursor.
CTRL_Y Delete all characters from the cursor to the end of the line.
CTRL_Z Return to the User View.
CTRL_] Kill incoming connection or redirect connection.
ESC_B Move the cursor back one word.
ESC_D Delete all characters from the cursor to the end of the word.
ESC_F Move the cursor forward one word.
ESC_N Move the cursor down a line.
ESC_P Move the cursor up a line.
ESC_< Move the cursor to the beginning of the clipboard.
ESC_> Move the cursor to the end of the clipboard.
Related commands
hotkey
9
hotkey
Use hotkey to assign a command to a configurable hotkey.
Use undo hotkey to restore the default.
Syntax
hotkey { CTRL_G | CTRL_L | CTRL_O | CTRL_T | CTRL_U } command
undo hotkey { CTRL_G | CTRL_L | CTRL_O | CTRL_T | CTRL_U }
Default
•Ctrl_G: display current-configuration (display the running configuration).
•Ctrl_L: display ip routing-table (display the IPv4 routing table information).
•Ctrl_O: undo debugging all (disable all debugging functions).
•Ctrl_T: No command is assigned to this hotkey.
•Ctrl_U: No command is assigned to this hotkey.
Views
System view
Predefined user roles
network-admin
Parameters
CTRL_G: Assigns a command to Ctrl+G.
CTRL_L: Assigns a command to Ctrl+L.
CTRL_O: Assigns a command to Ctrl+O.
CTRL_T: Assigns a command to Ctrl+T.
CTRL_U: Assigns a command to Ctrl+U.
command: Specifies the command to be assigned to the hotkey.
Usage guidelines
The system defines some hotkeys and provides five configurable command hotkeys. Pressing a hotkey
executes the command assigned to the hotkey.
To display system-defined and configurable hotkeys, use the display hotkey command.
Examples
# Assign the display tcp status command to the hotkey Ctrl+T.
<Sysname> system-view
[Sysname] hotkey ctrl_t display tcp status
Related commands
display hotkey
quit
Use quit to return to the upper-level view.
10
Syntax
quit
Views
Any view
Predefined user roles
network-admin
network-operator
Usage guidelines
Executing this command in user view disconnects you from the device.
Examples
# Return from GigabitEthernet 2/1/0 interface view to system view and then to user view.
[Sysname-GigabitEthernet2/1/0] quit
[Sysname] quit
<Sysname>
return
Use return to return to user view from any other view.
Syntax
return
Views
Any view except user view
Predefined user roles
network-admin
network-operator
Usage guidelines
Pressing Ctrl+Z has the same effect as the return command.
Examples
# Return to user view from GigabitEthernet 2/1/0 interface view.
[Sysname-GigabitEthernet2/1/0] return
<Sysname>
screen-length disable
Use screen-length disable to disable pausing between screens of output for the current session.
Use undo screen-length disable to enable pausing between screens of output for the current session.
Syntax
screen-length disable
undo screen-length disable
11
Default
The default varies by settings of the screen-length command in user line view.
The following are default settings for the screen-length command:
•Pausing between screens of output.
•Displaying up to 24 lines on a screen.
Views
User view
Predefined user roles
network-admin
Usage guidelines
If you disable pausing between screens of output, all output is displayed. The screen is refreshed
continuously until the final screen is displayed.
This command takes effect only for the current session. When you are logged out, the default is restored.
Examples
# Disable pausing between screens of output for the current session.
<Sysname> screen-length disable
Related commands
screen-length
system-view
Use system-view to enter system view from user view.
Syntax
system-view
Views
User view
Predefined user roles
network-admin
network-operator
Examples
# Enter system view from user view.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname]
12
RBAC commands
The device supports the FIPS mode that complies with NIST FIPS 140-2 requirements. Support for features,
commands, and parameters might differ in FIPS mode and non-FIPS mode. For more information about
FIPS mode, see Security Configuration Guide.
description
Use description to configure a description for a user role.
Use undo description to delete the description of a user role.
Syntax
description text
undo description
Default
A user role does not have a description.
Views
User role view
Predefined user roles
network-admin
Parameters
text: User role description, a case-sensitive string of 1 to 128 characters.
Examples
# Configure the description as labVIP for the user role role1.
<Sysname> system-view
[Sysname] role name role1
[Sysname-role-role1] description labVIP
Related commands
•display role
•role
display role
Use display role to display user role information.
Syntax
display role [ name role-name ]
Views
Any view
Other manuals for MSR SERIES
14
Table of contents
Other HP Network Router manuals
HP
HP ISCSI SR2122 User manual
HP
HP MSR900-W User manual
HP
HP N1200 - StorageWorks Network Storage Router User manual
HP
HP Series 200 User guide
HP
HP HP ProCurve Series 6600 Installation manual
HP
HP Fax 650 User manual
HP
HP A-MSR Series User manual
HP
HP HPE FlexNetwork MSR Router Series User manual
HP
HP FlexNetwork MSR3044 Assembly instructions
HP
HP MSR SERIES User manual
HP
HP 5920 User manual
HP
HP J4093A User manual
HP
HP MSR SERIES User manual
HP
HP MSR2000 Series User manual
HP
HP FlexNetwork HSR6800 User manual
HP
HP StorageWorks SR2122-2 How to use
HP
HP ProCurve Secure 7102dl Assembly instructions
HP
HP HP ProCurve Series 6600 User manual
HP
HP MSR SERIES Installation manual
HP
HP 10500 series User manual
