Hp Msr2000 series User manual

1

Product overview

Table 1 HP MSR 2000, 3000 and 4000 Router Series models

Product code HP description Alias

JG  HP 

JG 

J P   HP 

JG 

JG 

JG 

J  

x

For regulatory identification purposes, the HP 5920AF-24XG and HP 5920AF-24XG TAA products

are assigned Regulatory Model Numbers (RMN). The Regulatory Model Numbers for these

products are listed below. These regulatory numbers should not be confused with the marketing

names HP 5920AF, or product numbers JG296A and JG555A.

Product code RMN HP description

JG296A BJNGA-AC0007 HP 5920AF-24XG Switch

JG555A BJNGA-AC0007 HP 5920AF-24XG TAA Switch

x

For regulatory identification purposes, the HP 5900AF-48XG-4QSFP+ and HP

5900AF-48XG-4QSFP+ TAA products are assigned Regulatory Model Numbers (RMN). The

Regulatory Model Numbers for these products are listed below. These regulatory numbers should

not be confused with the marketing names HP 5900AF, or product numbers JC772A and JG554A.

Product code RMN HP description

JC772A BJNGA-AD0016 HP 5900AF-48XG-4QSFP+ Switch

JG554A BJNGA-AD0016 HP 5900AF-48XG-4QSFP+ TAA Switch

x

For regulatory identification purposes, the HP 5900AF-48XGT-4QSFP+ Switch is assigned a

regulatory model number (RMN) BJNGA-AD0018. This regulatory number should not be confused

with the marketing name HP 5900AF, or product code JG336A.

x

For regulatory identification purposes, the HP 5900AF-48G-4XG-2QSFP+ Switch is assigned a

regulatory model number (RMN) BJNGA-AD0017. This regulatory number should not be confused

with the marketing name HP 5900AF, or product code JG510A.

J

G411A BJNGA-BB0009 HP MSR2003 AC Router

______________________________________________________________________________________

J

G409A BJNGA-BB0008 HP MSR3012 AC Router

______________________________________________________________________________________

J

G406A BJNGA-BB0007 HP MSR3024 AC Router

______________________________________________________________________________________

J

G405A BJNGA-BB0011 HP MSR3044 Router

______________________________________________________________________________________

J

G404A BJNGA-BB0006 HP MSR3064 Router

______________________________________________________________________________________

J

G403A BJNGA-BB0010 HP MSR4060 Router Chassis

______________________________________________________________________________________

J

G402A BJNGA-BB0005 HP MSR4080 Router Chassis

For regulatory identi

f

ication purposes, the products are assigned Regulatory Model

Numbers (RMN). The Regulatory Model Numbers for these products are listed below.

These regulatory numbers should not be confused with the marketing name (HP description)

or product numbers (product code).

i

Contents

Preparing for installation ············································································································································· 1

Safety recommendations ··················································································································································1

Safety symbols ··························································································································································1

General safety recommendations···························································································································1

Electricity safety ························································································································································1

Laser safety································································································································································1

Examining the installation site ·········································································································································1

Temperature and humidity·······································································································································2

Cleanness··································································································································································2

Cooling system ·························································································································································2

ESD prevention ·························································································································································3

EMI·············································································································································································4

Lightning protection··················································································································································4

Rack-mounting···························································································································································4

Installation tools·································································································································································5

Installation accessories ·····················································································································································5

Checklist before installation ·············································································································································5

Installing the router·························································································································································i

Installation prerequisites ···················································································································································· i

Installation flow ·································································································································································· i

Installing the router···························································································································································iii

Installing an air filter ···············································································································································iii

Mounting the router on a workbench····················································································································iii

Installing the router in a 19-inch rack ··················································································································· iv

Grounding the router ························································································································································ x

Grounding the router through the grounding terminal on the rack····································································· x

Grounding the router with a grounding strip ····································································································· xiii

Grounding the router with a grounding conductor buried in the earth ground ············································· xiv

Installing an interface module······································································································································· xiv

Installing a SIC······················································································································································· xiv

Installing a DSIC····················································································································································· xv

Installing an HMIM················································································································································ xvi

Installing a MIM···················································································································································· xvii

Connecting the router to the network··························································································································· xix

Connecting an Ethernet cable······························································································································ xix

Connecting an optical fiber ································································································································· xix

Installing a CF card························································································································································· xx

Logging in through the console port ···························································································································· xxi

Connecting a console cable································································································································· xxi

Setting terminal parameters································································································································· xxii

Installing a power module··········································································································································· xxiv

Connecting the power cord ········································································································································ xxvi

Connecting an AC power cord ························································································································· xxvi

Connecting a DC power cord··························································································································· xxvii

Connecting an RPS power cord······················································································································· xxviii

Verifying the installation·············································································································································· xxix

Powering on the router ················································································································································ xxix

Verifying before power-on·································································································································· xxix

ii

Powering on the router ······································································································································· xxix

Displaying boot information································································································································ xxx

Examining the router after power-on·················································································································· xxx

Configuring basic settings for the router ··················································································································· xxxi

Replacement procedure·················································································································································i

Replacing a power module··············································································································································· i

Replacing an air filter ························································································································································ i

Replacing a CF card························································································································································· ii

Replacing a SIC ·······························································································································································iii

Replacing a DSIC····························································································································································· iv

Replacing an HMIM ························································································································································· v

Replacing a MIM ····························································································································································· vi

Troubleshooting······························································································································································i

Troubleshooting the power supply system failure··········································································································· i

Troubleshooting fan failures·············································································································································· i

Troubleshooting the configuration system failures ········································································································· ii

No display on the configuration terminal·············································································································· ii

Garbled characters on the configuration terminal································································································ ii

No response from the serial port···························································································································· ii

Troubleshooting user password loss ······························································································································· ii

Symptom···································································································································································· ii

Solution·····································································································································································iii

Troubleshooting interface module, cable, and connection failure··············································································iii

Appendix A Chassis views and technical specifications ····························································································i

Chassis views ····································································································································································· i

MSR3012 AC···························································································································································· i

MSR3012 DC ··························································································································································· ii

MSR3024 AC··························································································································································· ii

MSR3024 DC ··························································································································································iii

MSR3024 PoE ························································································································································· iv

MSR3044·································································································································································· v

MSR3064································································································································································· vi

Appearance of power modules····································································································································· vii

AC power module·················································································································································· vii

DC power module ·················································································································································· vii

PoE power module ················································································································································ viii

Technical specifications················································································································································· viii

Appendix B LEDs····························································································································································i

Panel LEDs··········································································································································································· i

MSR3012··································································································································································· i

MSR3024··································································································································································· i

MSR3044·································································································································································· ii

MSR3064·································································································································································· ii

Power module LEDs··························································································································································iii

Appearance ·····························································································································································iii

LED description································································································································································· iv

Appendix C Slot arrangement ···································································································································· 1

1

Preparing for installation

Safety recommendations

Safety symbols

When reading this document, note the following symbols:

WARNING means an alert that calls attention to important information that if not understood or

followed can result in personal injury.

CAUTION means an alert that calls attention to important information that if not understood or

followed can result in data loss, data corruption, or damage to hardware or software.

General safety recommendations

Keep the chassis and installation tools away from walk areas.

Make sure the ground is dry and flat and anti-slip measures are in place.

Unplug all the external cables (including power cords) before moving the chassis.

Electricity safety

Locate the emergency power-off switch in the room before installation. Shut the power off at once in

case accident occurs. Disconnect the power cord of the router if necessary.

Make sure the router is correctly grounded.

Do not open or close the chassis cover when the router is powered on.

Correctly connect the interface cables of the router.

Use an uninterrupted power supply (UPS).

If there are two power inputs, disconnect the two power inputs to power off the router.

Do not work alone when the router has power.

Always make sure the power has been disconnected during the installation and replacement

procedures.

Laser safety

Do not stare into any fiber port when the router has power. The laser light emitted from the optical

fiber may hurt your eyes.

Install the dust cover if the fiber port is not connected to a fiber connector to prevent damage to the

fiber port.

Examining the installation site

The routers can only be used indoors. To make sure the router operates properly and to prolong its

service lifetime, the installation site must meet the following requirements.

2

Temperature and humidity

You must maintain a proper temperature and humidity in the equipment room.

Lasting high relative humidity tends to cause poor insulation, electricity creepage, mechanical

property change of materials, and corrosion of metal parts.

Lasting low relative humidity is likely to result in loose screws due to washer contraction, and even

ESD, which causes the circuits to fail.

A high temperature is the most undesirable condition, because it accelerates the aging of insulation

materials and significantly lowers reliability and service life of the router.

For the temperature and humidity requirements of the MSR3000 router, see Table 1.

Table 1 Temperature and humidity requirements

Tem

p

erature Humidit

y

0°C to 45°C (32°F to 113°F) 5% to 90% (noncondensing)

Cleanness

Dust buildup on the chassis might result in electrostatic adsorption, which causes poor contact of metal

components and contact points, especially when indoor relative humidity is low. In the worst case,

electrostatic adsorption can cause communication failure.

Table 2 Dust concentration limit in the equipment room

Substance Concentration limit (

p

articles/m3)

Dust particles ≤3 x 104

(No visible dust on desk in three days)

NOTE:

Dust particle diameter ≥5 μm

The equipment room must also meet strict limits on salts, acids, and sulfides to eliminate corrosion and

premature aging of components, as shown in Table 3.

Table 3 Harmful gas limits in the equipment room

Gas Max. (m

g

/m3)

SO20.2

H2S 0.006

NH30.05

Cl20.01

Cooling system

The MSR3012/3024 router adopts left to right airflow for heat dissipation, and the MSR3044/3064

router adopts left to rear airflow for heat dissipation.

3

Figure 1 Airflow through the MSR3012/3024 chassis

Figure 2 Airflow through the MSR3044/3064 chassis

To ensure good ventilation, the following requirements must be met:

The air inlet and outlet vents are not blocked, and leave at least 10 cm (3.94 in) of clearance.

The installation site has a good cooling system.

ESD prevention

To prevent electrostatic discharge (ESD), follow these guidelines:

Make sure the router and the floor are well grounded.

Take dust-proof measures for the equipment room.

Maintain the humidity and temperature at a proper level.

Always wear an ESD-preventive wrist strap and ESD-preventive cloth when touching a circuit board

or transceiver module.

An MSR3000 router does not supply an ESD-preventive wrist wrap. Prepare an ESD-preventive

wrist wrap yourself.

4

Place the removed memory module, CF card, or interface module on an antistatic workbench, with

the face upward, or put it into an antistatic bag.

Touch only the edges, instead of electronic components when you observe or move a removed

memory module, CF card, or interface module.

To attach an ESD-preventive wrist strap:

1. Wear the wrist strap on your wrist.

2. Lock the wrist strap tight around your wrist to keep good contact with the skin.

3. Insert the ESD-preventive plug into the ESD-preventive socket.

4. Make sure the rack is well grounded.

CAUTION:

Check the resistance of the ESD-preventive wrist strap for safety. The resistance readin

g

should be in the

range of 1 to 10 megohm (Mohm) between human body and the ground.

EMI

All electromagnetic interference (EMI) sources, from outside or inside of the router and application system,

adversely affect the router in a conduction pattern of capacitance coupling, inductance coupling,

electromagnetic wave radiation, or common impedance (including grounding system) coupling. To

prevent EMI, follow these guidelines:

Take measures against interference from the power grid.

Do not use the router together with the grounding equipment or lightning-prevention equipment of

power equipment, and keep the router far away from them.

Keep the router far away from high-power radio launchers, radars, and equipment with high

frequency or high current.

Use electromagnetic shielding when necessary.

Lightning protection

To better protect the MSR3000 router from lightning, do as follows:

Make sure the grounding cable of the chassis is well grounded.

Make sure the grounding terminal of the AC power receptacle is well grounded.

Install a lightning arrester at the input end of the power supply to enhance the lightning protection

capability of the power supply.

Install a special lightning arrester at the input end of outdoor signal lines (for example, E1/T1 line)

to which interface modules of the router are connected to enhance the lightning protection

capability.

Rack-mounting

Before mounting the router in a standard 19-inch rack, adhere to the following requirements:

The rack is equipped with a good ventilation system.

The rack is sturdy enough to support the router and its accessories.

5

For heat dissipation and device maintenance, make sure the front and rear of the rack are at least

0.8 m (2.62 ft) away from walls or other devices, and the headroom in the equipment room is no

less than 3 m (9.84 ft).

Installation tools

Installation accessories

Checklist before installation

Table 4 Checklist before installation

Item Re

q

uirements

Result

Installation site Ventilation

There is a minimum clearance of 10 cm (3.94 in)

around the inlet and outlet vents for heat

dissipation of the router chassis.

A good ventilation system is available at the

installation site.

ESD-preventive wrist strap Hiagonal pliers Blow dryer Drill Marker

Flathead screwdriver Phillips screwdriver Needle-nose pliers Wire-stripping pliers Claw hammer

6

Item Re

q

uirements

Result

Temperature 0°C to 45°C (32°F to 113°F).

Relative humidity 5% to 90% (noncondensing).

Cleanness Dust concentration ≤3 × 104particles/m3.

No visible dust on desk within three days.

ESD prevention

The equipment and floor are well grounded.

The equipment room is dust-proof.

The humidity and temperature are at a proper

level, respectively.

Wear an ESD-preventive wrist strap and uniform

when touching a circuit board.

Place the removed memory module, CF card, or

interface module on an antistatic workbench, with

the face upward, or put it into an antistatic bag.

Touch only the edges, instead of electronic

components when observing or moving a removed

memory module, CF card, or interface module.

EMI prevention

Take effective measures to protect the power

system from the power grid system.

Separate the protection ground of the router from

the grounding device or lightning protection

grounding device as far as possible.

Keep the router far away from radio stations, radar

and high-frequency devices working in high

current.

Use electromagnetic shielding when necessary.

Lightning

protection

The grounding cable of the chassis is well

grounded.

The grounding terminal of the AC power

receptacle is well grounded.

A port lightning arrester is installed. (Optional.)

A power lightning arrester is installed. (Optional.)

A signal lightning arrester is installed at the input

end of an external signal cable. (Optional.)

Electricity safety

Equip an uninterrupted power supply (UPS).

In case of emergency during operation, switch off

the external power switch.

Workbench The workbench is stable enough.

The workbench is well grounded.

Rack-mounting

requirements

The rack is equipped with a good ventilation

system.

The rack is sturdy enough to support the weight of

the router and installation accessories.

The size of the rack is appropriate for the router.

The front and rear of the rack are at least 0.8 m

(2.62 ft) away from walls or other devices.

Safety

precautions

The router is far away from any moist area and heat source.

The emergency power switch in the equipment room is located.

7

Item Re

q

uirements

Result

Tools Installation accessories supplied with the router.

User supplied tools.

Reference Documents shipped with the router.

Online documents.