HP Surestore 6164 - Switch User manual

quick start guide
hp surestore
fc switch 6164
www.hp.com

Notice
© Hewlett-Packard Company, 2001. All rights reserved.
Part number: A7326-90901
Edition: E0801
Hewlett-Packard Company makes no warranty of any
kind with regard to this material, including, but not
limited to, the implied warranties of merchantability and
fitness for a particular purpose. Hewlett-Packard shall not
be liable for errors contained herein or for incidental or
consequential damages in connection with the furnishing,
performance, or use of this material.
This document contains proprietary information, which is
protected by copyright. No part of this document may be
photocopied, reproduced, or translated into another
language without the prior written consent of
Hewlett-Packard. The information contained in this
document is subject to change without notice.
Use, duplication, or disclosure by government is subject
to restrictions as set forth in subdivision (c) (1) (ii) of the
Rights in Technical Data and Computer Software Clause
at DFARS 252.227.7013.
Warranty
If you have any questions about the warranty for this
product, contact your dealer or local Hewlett-Packard
sales representative.
Trademarks
Brocade, SilkWorm, Brocade Extended Fabrics, Brocade
Fabric Manager, Brocade Fabric OS, Brocade Fabric
Watch, Brocade QuickLoop, Brocade Remote Switch,
Brocade Web Tools, and Brocade Zoning are trademarks
or registered trademarks of Brocade Communications
Systems, Inc. in the United States and/or in other
countries.
All other brands, product or service names are or may be
trademarks or service marks of, and are used to identify
products of services of their respective owners.
Brocade Extended Fabrics, Brocade Fabric Manager,
Brocade Fabric OS, Brocade Fabric Watch, Brocade
QuickLoop, Brocade Remote Switch, Brocade Web Tools,
and Brocade Zoning are hereafter referred to as Extended
Fabrics, Fabric Manager, Fabric OS, Fabric Watch,
QuickLoop, Remote Switch, Web Tools, and Zoning
respectively.
Safety notices
Any servicing, adjustment, maintenance, or repair must be
performed only by authorized service-trained personnel.
Format conventions
variable Indicates that you must supply a value.
output Denotes text displayed on the screen.
[ ] Indicates that the enclosed element is
optional and may be left out.
{ } Indicates that you must specify one of the
listed options.
| Separates alternatives.
. . . Indicates a repetition of the preceding
parameter.
Tip Denotes ideas for enhanced product usage.
Note Denotes significant concepts or operating
instructions.
CAUTION Denotes a hazard that can cause hardware or
software damage.
WARNING Denotes a hazard that can cause personal
injury or death.
2

3
Revision History . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Updates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Related Publications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
1Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
2Installing the Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Rack-Mount Safety Guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Tools Required . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Hardware Identification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Installing the Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
3Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
System Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Power Supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Fabric Operating System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
GBIC Modules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Fibre Channel Cable Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Initialize the Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
CONTENTS

4 Quick Start Guide
Serial Port and Ethernet Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Ethernet Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Serial Port Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Status Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
4Installing Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Installing Fabric Manager . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Installing Fabric Manager . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Launching Fabric Manager . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Adding the Browser Pathname to the Properties File . . . . . . . . . . . . 54
Uninstalling Fabric Manager . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Installing Remote Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Installing Through Telnet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Installing Through Web Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Installing Extended Fabrics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Installing Through Telnet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Installing Through Web Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
5Diagnostics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
Diagnostic Tests . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
Error Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
6Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
Environmental . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
Power Supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
Product Regulatory Information . . . . . . . . . . . . . . . . . . . 69

5
Revision History
Updates
For the most current technical support information for the fc-Switch 6164,
visit the HP web site located at:
http://www.hp.com
Firmware and software updates are found on the HP web site at:
http://www.hp.com
For information about product availability, configuration, and connectivity,
consult your HP account representative.
Related Publications
Related product information can be found in the following publications.
Those publications with part numbers are provided as printed copies with
your product. The HP Surestore FC Switch 6164 Documentation CD
contains all publications listed in the table below and is also provided with
your product.
August 2001 First release.
Title Part Number
HP Surestore FC Switch 6164 Documentation
CD A7326-11011
HP Surestore FC Switch 6164 Installation and
Reference Guide A7326-90902
Distributed Fabrics User’s Guide, version 2.2 Available only on CD
Fabric OS Reference Manual, version 2.4 Available only on CD
Fabric Watch User’s Guide, version 2.2 Available only on CD
MIB Reference Manual, version 2.3 Available only on CD

6 Quick Start Guide
For information about Fibre Channel standards, visit the Fibre Channel
Association web site, located at
http://www.fibrechannel.com.
Title Part Number
QuickLoop User’s Guide, version 2.3 Available only on CD
Web Tools User’s Guide, version 2.3 Available only on CD
Zoning User’s Guide, version 2.2 Available only on CD

7
1
OVERVIEW
The HP Surestore FC Switch 6164 provides a 64-port enterprise-class fibre
channel switching solution for any-to-any connectivity requirements in a
Storage Area Network (SAN). The FC 6164 provides a cost-effective
means of meeting the large-port-count requirements of workgroups and
enterprises.
The FC 6164 is a rack-mountable solution, comprised of a chassis and six
fully integrated Silkworm 2250 switch modules, with preconfigured
inter-switch link (ISL) fibre optic cables and enhanced management
software. The FC 6164 includes Fabric Manager, a management application
that provides a centralized view of the integrated switch modules to
simplify administration and maintenance.
Using this preconfigured, stand-alone fabric as a building block of larger
fabrics, you can scale your storage environment as needed while leveraging
your existing server and storage infrastructure.

8 Quick Start Guide

9
2
INSTALLING THE SWITCH
This chapter provides the step-by-step instructions for installing the FC
Switch 6164 in either a HP rack or a Compaq/Rittal 19-inch rack.
Note Most of the steps in this procedure are unnecessary if the FC 6164
was installed at an HP integration center prior to shipment. However, Steps
16 and 17 (assembling and installing the plenum) and Step 19 (installing
the switch door) must be performed for factory-integrated switches (see
pages 29 and 32).

10 Quick Start Guide
Rack-Mount Safety Guidelines
In a rack-mount installation, follow these safety guidelines:
•When installing a switch in a closed or multi-rack assembly, make
certain the air temperature, measured at the front panel, does not exceed
40° C during operation.
•Ensure that the airflow available to the switch is at least 300 cfpm.
•Verify the supply circuit, line fusing, and wire size are adequate. Refer
to the switch’s nameplate for its power requirements.
•Verify that all equipment installed in the rack has a reliable ground
connection. Do not rely on connection to a branch circuit, such as power
strips.
•Route and support the power cord to ensure that it does not become
crimped or damaged and to prevent it from interfering with other
equipment and cabling installed in the rack.
•The FC 6164 weighs approximately 200 pounds. A lift is required to
move and position the switch safely, and at least two people are required
to lift and position the switch onto the lift. Two or more people are also
required to move the switch from the lift into the rack and when
positioning the switch in the rack. Move the switch chassis slowly and
carefully at all times, and continue supporting it until it is correctly
positioned on the rail tray and fastened to the rack. Use extreme caution
when handling or transporting the switch to prevent injury to personnel,
damage to the switch, and/or damage to the rack and other equipment
mounted in it.

Installing the Switch 11
Package Contents
Figure 1 shows the major items contained in the FC 6164 shipping
carton(s). Table 1 lists the contents of the shipping carton.
Figure 1. Major Items Contained in the Shipping Carton(s)
Table 1. Contents of the Shipping Carton(s)
ASwitch
B Plenum kit (4 rectangular sheets of Lexan with 6 adhesive strips
pre-attached) (HP P/N A7326-87903)
C Front bezel (HP P/N A7326-40001)
A
C
B
G
D
F
F
E

12 Quick Start Guide
Note A package containing two mounting rails may be included with the
switch. These rails are not used and can be discarded.
D Rail Tray kit (Rail tray, 2 brackets, 2 M5 Tinnerman nuts, 4 M5 torx
screws) (HP P/N A6534-60016)
E Shim plates (2 ea. HP P/N A7326-87904)
F Rack-Mount Bracket set (2 Rack-Mount brackets)
(HP P/N A7326-87901)
G Switch door (part of Accessory kit [HP P/N A7326-70001], which
also includes: software CD, documentation CD, and serial cable)
H Miscellaneous hardware: (not shown) (HP P/N A7326-87905)
Note: The hardware in the standard hardware package (unmarked plastic bag)
is required to install the switch in an HP rack. Some of the hardware in the
standard hardware package and the hardware in the Compaq/Rittal hardware
package is required to install the switch in a Compaq/Rittal rack.
Standard hardware package
8 #8-32 x .375-inch (.3125) flat-head screws w/patchlock
8 M5 torx screws with lock washers
6 M5 Tinnerman nuts
4 1/4-20 x 1/2-inch Phillips pan-head screws with lock washers
Compaq/Rittal hardware package
6 #10-32 Tinnerman nuts
6 #10-32 x 5/8-inch Phillips pan-head screws with captive lock washers
6 spacers
4 1/4-inch flat washers
4 M5 flat washers
Table 1. Contents of the Shipping Carton(s) (continued)

Installing the Switch 13
Tools Required
The following tools are required to install the switch:
•#2 Phillips screwdriver
•T20 torx screwdriver
•Genie lift (to transport switch); for information on the lift, see:
http://www.genielift.com/ml-series/ml-1-2.html
or
http://slick2.atl.hp.com/ceworld/siteservices/tools/genie/genielift_ordering.htm

14 Quick Start Guide
Hardware Identification
Figure 2 contains drawings and descriptions of the hardware used when
installing the FC 6164 in an HP rack or a Compaq/Rittal rack. Use this key
to help identify the hardware specified in the installation procedure in this
chapter.
Figure 2. Hardware Key
M5 Torx screw with captive lock washer
#8-32 x 375-inch flat-head Phillips screw
M5 Tinnerman nut
#10-32 Tinnerman nut
1/4-20 x 1/2 inch Phillips screw and washer
#10-32 X 5/8-inch pan-head Phillips screw
Spacers for Compaq/Rittal racks
1/4-inch flat washer
M5 flat washer

Installing the Switch 15
Installing the Switch
WARNING Mount the switch as low as possible in the rack to ensure that
the weight of the switch does not make the rack unstable. 15 Rack Units
(RUs) are required (see Figure 3).
CAUTION The switch must be installed with the front end facing the back
of the rack. When the switch is mounted this way, the air flows through the
switch in the same direction as it does through the other equipment in the
rack (see Figure 3).
Figure 3. Switch Mounted Back-to-Front and Low in the Rack
Front of rack
Back
of
switch
15 RU

16 Quick Start Guide
Note In these instructions, the 15 RUs used to mount the switch are called
RU-1 through RU-15 (see Figure 3); RU-1 is the lowest of the 15 RUs.
1. Check the contents of the shipping carton and the kits within the carton
to verify that all of the required parts and hardware are available (see
Figure 2, Table 1, and Figure 3).
2. Chooseamountinglocationintherackfortheswitch(seetheWARNING
at the beginning of this section and Figure 3).
3. Install the rail tray in the rack:
a. Locate the lowest RU of the 15 you chose for mounting the switch
(this is RU-1).
b. Attach the rear rail-tray brackets to the rear rack uprights at RU-1:
For an HP rack, use one M5 torx screw for each bracket (see Figure 4).
For a Compaq/Rittal rack, insert spacers in the upper and lower holes
where the brackets are to be mounted, position the brackets on the
spacers, and use one M5 torx screw with captive lock washer and two
M5 flat washers to attach each bracket (see Figure 4).

Installing the Switch 17
Figure 4. Installing the Rear Rail-Tray Brackets
Spacer
M5
flat
washer
M5 Screw
with attached
lock washer
Rear Tray
bracket
M5
flat
washer
Compaq/Rittal
rack
M5 Screw
with attached
lock washer
HP rack
Rear Tray
bracket

18 Quick Start Guide
Note When installing the rail tray in a Compaq/Rittal rack, ignore the
mounting instructions on the label attached to the rail tray (some rail
trays do not have this label).
c. Install Tinnerman nuts for the top holes of RU-1 in both of the rack’s
front uprights (see Figure 5).
Note The Tinnerman nuts used for the two types of racks (HP and
Compaq/Rittal) are of different styles and different sizes. Refer to
Figure 3 and Figure 5 to identify the correct Tinnerman nut to use with
the rack you are installing the switch in.
Figure 5. Installing Tinnerman Nuts and Spacers on the Front Uprights
Inner surface of
Compaq/Rittal
rack
Spacer
Tinnerman
nut
Outer surface of
HP rack

Installing the Switch 19
d. For a Compaq/Rittal rack, insert spacers in the holes immediately
below the Tinnerman nuts you inserted in Step 3c (see Figure 5).
e. Orient the rail tray as shown in Figure 6, and insert it into the rack
from the front. The slots in the sides of the rail tray must slide over
the posts on the rear rail-tray brackets, and the posts on the rail tray’s
front mounting flanges must be inserted in the center holes of RU-1.
f. Insert M5 torx screws through the top holes in both of the rail tray
mounting flanges. The screws pass through the holes in the rack
uprights and thread into the Tinnerman nuts you installed on the
uprights in Step 3c. Tighten the screws.
Figure 6. Inserting the Rail Tray in the Rack

20 Quick Start Guide
4. Place a shim plate on each side of the rail tray (see Figure 7).
CAUTION The shim plates must be placed on top of both sides of the
rail tray to prevent misalignment between the mounting holes in the
switch flanges and the holes in the rack uprights.
Figure 7. Placing the Shim Plates on the Rail Tray