HPE Cloudline CL2600 User manual

HPE Cloudline &/&/ Gen10 BMC Web
UI
User Guide V1.00
Abstract
This guide provides information about configuring, updating, and operating HPE CL200/CL200 Gen10 servers using BMC Web UI. This
document is intended for system administrators, Hewlett Packard Enterprise representatives, and Hewlett Packard Enterprise Authorized
Channel Partners who are involved in configuring and using Hewlett Packard Enterprise servers
© Copyright 201Hewlett Packard Enterprise Development LP
The information contained herein is subject to change without notice. The only warranties for Hewlett Packard Enterprise products and
services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed
as constituting an additional warranty. Hewlett Packard Enterprise shall not be liable for technical or editorial errors or omissions
contained herein.
This document contains proprietary technical information, which is property of Hewlett Packard Enterprise and shall not be disclosed to
others in whole or in part, reproduced, copied, or used as the basis for design, manufacturing, or sale of apparatus.
Links to third-party websites take you outside the Hewlett Packard Enterprise website. Hewlett Packard Enterprise has no control over
and is not responsible for information outside the Hewlett Packard Enterprise website.
Part Number: P08992-002
December 201
Edition: 2

Contents
1 USER NAME AND PASSWORD .............................................................................................................................................4
2 QUICK BUTTON AND LOGGED-IN USER ......................................................................................................................... 5
3 HELP........................................................................................................................................................................................ 6
4 MENU BAR ............................................................................................................................................................................. 6
5 DASHBOARD .......................................................................................................................................................................... 7
6 SENSOR ................................................................................................................................................................................... 8
6.1 SENSOR DETAIL ................................................................................................................................................................9
6.2 SENSOR EVENTS .............................................................................................................................................................11
FRU INFORMATION ...........................................................................................................................................................12
LOGS & REPORTS ..............................................................................................................................................................14
.1 IPMI EVENT LOG..........................................................................................................................................................14
.2 SYSTEM LOG ...................................................................................................................................................................15
.3 AUDIT LOG.......................................................................................................................................................................16
 SETTINGS............................................................................................................................................................................17
.1 DATE & TIME ..................................................................................................................................................................17
.2 EXTERNAL USER SERVICES .......................................................................................................................................19
.3 KVM MOUSE SETTINGS...............................................................................................................................................30
.4 LOG SETTINGS ...............................................................................................................................................................31
.5 MEDIA REDIRECTION SETTINGS ..............................................................................................................................34
.6 NETWORK SETTINGS ...................................................................................................................................................39
.7 PAM ORDER SETTINGS ................................................................................................................................................49
.8 PLATFORM EVENT FILTER .........................................................................................................................................50
.9 SERVICES ........................................................................................................................................................................58
.10 SMTP SETTINGS.............................................................................................................................................................62
1 SSL SETTINGS.................................................................................................................................................................65
.13 SYSTEM FIREWALL ......................................................................................................................................................70
.14 USER MANAGEMENT ....................................................................................................................................................80
1 REMOTE CONTROL......................................................................................................................................................... 85

1 POWER CONTROL ...........................................................................................................................................................93
1 MAINTENANCE GROUP ...................................................................................................................................................94
1.1 BACKUP CONFIGURATION .........................................................................................................................................95
1.2 FIRMWARE IMAGE LOCATION .................................................................................................................................96
1.3 FIRMWARE INFORMATION........................................................................................................................................97
1.4 HPM FIRMWARE UPDATE ..........................................................................................................................................101
1.5 FIRMWARE INFORMATION .......................................................................................................................................103
1.6 PRESERVE CONFIGURATION ...................................................................................................................................104
1.7 RESTORE CONFIGURATION .....................................................................................................................................109
1.8 RESTORE FACTORY DEFAULTS ...............................................................................................................................110
1.9 SYSTEM ADMINISTRATOR ........................................................................................................................................111
1 SIGN OUT ...........................................................................................................................................................................112

1 User Name and Password
To access the &/&/Gen10 Server, the BMC Web utility will prompt you to enter the User Name
and Password.
The fields are explained as follows:
For basic login to the BMC Web UI, use the following login:
·Username: Refer to the label on the server for username information.
·Password: Refer to the label on the server for password information.
For login using the Redfish protocol, use the following login:
·Username: Refer to the label on the server for username information.
·Password: Refer to the label on the server for password information.
For login using the IPMI protocol, use the following login:
·Username:Refer to the label on the server for username information.
·Password: Refer to the label on the server for password information.
Remember Username: Check this option to remember your login credentials.
Sign me in: After entering the required credentials, click the Sign me in to login to GUI.
I forgot my password: If you forget your password, you can generate a new one using this link.
Enter the username, click on Forgot Password link. This will send the newly generated password to the configured
Email-ID for the user.
Login Page
4

ZĞƋƵŝƌĞĚƌŽǁƐĞƌ^ĞƚƚŝŶŐƐ
Allow file download from this site: For Internet Explorer, Choose Tools ->Internet Options ->Security Tab, based
on device setup, select among Internet, Local intranet, trusted sites and restricted sites. Click Custom level.... In the
Security Settings - Zone dialog opened, under settings, find Downloads option, Enable File download option.
Click OK to the entire dialog boxes.
For all Other Browsers, accept file download when prompted.
Enable javascript for this site: The icon indicates whether the javascript setting is enabled in browser.
Enable cookies for this site: The icon indicates whether the cookies setting are enabled in browser.
Note: Cookies must be enabled in order to access the website.
2 Quick Button and Logged-in User
The user information and quick buttons are located at the top right of the Zeb *8,.7KHIROORZLQJ screenshot
VKRZV the logged-in user information.
User Information
The logged-in user information shows the logged-in user, his/her privilege and the ILYH quick buttons allowing you
to perform the following functions:
Logged-in user and its privilege level
This option shows the logged-in user name and privilege. There are five kinds of privileges.
User: Only valid commands are allowed.
Operator: All BMC commands are allowed except for the configuration commands that can change the behavior of
the out-of-Eand interfaces.
Administrator: All BMC commands are allowed.
No Access: Login access denied.
OEM: All OEM commands are allowed.
Notification: Click the icon to view the notification messages.
Refresh: Click the icon to reload the current page.
%,26&OLFNWKHLFRQWRYLHZ%,26UHODWHGLQIRUPDWLRQ
Sync: Click the icon to synchronize with Latest Sensor and Event Log updates.
Sign-out: Click the icon to log out of the Web GUI.
Warning: Click to view the warning messages.
User Information
5

3 Help
Help - The Help icon is Located at the top right of the each page in Zeb GUI. Click this help icon to view more
detailed field descriptions.
4MenuBar
The menu bar displays the following:
Firmware Information will be displayed with the latest version, date and time details. Power Control Status will
be displayed as Host Online. 7RFKHFN+3((QG8VHU/LFHQVH$JUHHPHQWFOLFN+3((8/$OLQN
To Change the Power Control Status, click Host Online link.
6

5 Dashboard
The Dashboard page gives the overall information about the status of a device.
To open the Dashboard page, click Dashboard from the menu bar. It displays the following:
Dashboard
A brief description of the Dashboard page is SURYLGHGLQWKHIROORZLQJVHFWLRQ.
BMC Up Time
Indicates the Power On time.
Pending Deassertions
/ists the all pending events incurred by various sensors and occupied/available space in logs can be viewed. )RU
PRUHLQIRUPDWLRQ about the pending events details, click the More info link. This navigates to the Event Log page.
Access Logs
A graphical representation of all events incurred by various sensors and occupied/available space in logs can be
viewed,I you click on the More info link, you can view the Audit Log page.
Today & 30 Days (Event Logs)
This page displays the list of event logs occurred by the different sensors on this device. Click Details link on Today
and 30 days to view the event logs for Today and 30 daysrespectively.
Sensor Monitoring
It lists all the critical sensors on the device. If you click on any list sensor, you can view the Sensor detail page with
the Sensor information and Sensor Events details.
7

6Sensor
The Sensor Readings page displays all the sensor related information.
To open the Sensor Readings page, click Sensor from the menu. Click on any sensor to show more information about
that particular sensor, including thresholds and a graphical representation of all associated events.
7KHIROORZLQJLVD sample screenshot of WKHSensor Readings page.
8

The Sensor Readings page contains the following information:
In WKH Sensor Reading page, Oive readings GLVSOD\for all the available sensors with details VXFKDV Sensor Name,
Status, Current Reading and Behavior
6.1 Sensor detail
Select a particular Sensor from the Critical Sensor or Normal Sensor lists. The Sensor Information as Live Widget
and Thresholds for the selected sensor will be displayed as shownLQWKHIROORZLQJVFUHHQVKRW.
For Illustrative Purpose, a sample screenshot of Sensor detail page with Change Thresholds option is shown and
explained LQWKHIROORZLQJVFUHHQVKRW.
Note: Widgets provide real time information about a particular sensor. UserV can track a sensor's behavior over a
specific amount of time at specific intervals. The result will be displayed as a line graph in the widget. The session
will not expire, until the widgets UHFHLYHV a live data of the last widget that is kept opened.
For the selected sensor, this widget gives a dynamic representation of the readings for the sensor.
There are six types of thresholds:
· Lower Non-Recoverable (LNR)
· Lower Critical (LC)
· Lower Non-Critical (LNC)
· Upper Non-Recoverable (UNR)
· Upper Critical (UC)
· Upper Non-Critical (UNC)
9

5IFUISFTIPMETUBUFTDPVMECF
v-PXFS/PODSJUJDBMHPJOHMPX
v-PXFS/PODSJUJDBMHPJOHIJHI
v-PXFS$SJUJDBMHPJOHMPX
v-PXFS$SJUJDBMHPJOHIJHI
v-PXFS/POSFDPWFSBCMFHPJOHMPX
v-PXFS/POSFDPWFSBCMFHPJOHIJHI
v6QQFS/PODSJUJDBMHPJOHMPX
v6QQFS/PODSJUJDBMHPJOHIJHI
v6QQFS$SJUJDBMHPJOHMPX
v6QQFS$SJUJDBMHPJOHIJHI
v6QQFS/POSFDPWFSBCMFHPJOHMPX
v6QQFS/POSFDPWFSBCMFHPJOHIJHI
10