www.hsm.eu
HSM 8 TE
HSM 8 TE horizontal baling press
In terms of performance, efficiency and flexibility our mobile HSM 8 TE
small baler is hard to beat. This compact baling press is extremely
easy to operate: insert the strapping tape, switch it on and watch it go!
The strapping and ejection of the bales is executed with ease. The
complete bale ejection means that the compact bales are ejected by
the machine directly onto a pallet and can be easily transported to a
storage location.
Technical data
Order number: 6208194
EAN 4026631064293
Pressing power: 80 kN
Specific pressing power: 24,37 N/cm²
Driving power: 4 kW
Voltage / Frequency: 400 V / 50 Hz
Cycle time when idling: 26 s
Volume throughput in
idle operation (theor.):
4,38 m³/h
Loading height: 660 mm
Loading aperture width
x Loading aperture
length:
645 x 730 mm
Bale width x Bale height
x Bale length:
650 x 505 x 500 mm
Bale weight (up to): 70 kg
Method of loading: manual
Length x Width x Height: 2505 x 813 x 868 mm
Weight: 554 kg
Type of consumables: Strapping tape
Press material: Plastic film, Mixed paper,
Cardboard, Getränke und
Aluminiumdosen
Product information
Mobile on castors Suitable for cardboard as well as
film
Compaction against counterplate
by horizontal moving press ram
