4 2.990.999.120_en 04/2013
SP 5080
4 Commissioning 26
4.1 Baling press controls.........................................................................................26
4.1.1 Accessing the SERVICE menu.........................................................................................30
4.1.2 Set-up mode .....................................................................................................................31
4.1.2.1Pressure plate forward-backward / door lock open-close.....................................................31
4.1.2.2To exit set-up mode...............................................................................................................31
4.1.3 To display / clear the daily bale meter...............................................................................32
4.1.4 To display the total bale meter..........................................................................................32
4.1.5 To display the service hours meter ...................................................................................32
4.1.6 To set the user language...................................................................................................33
4.1.7 To display the error memory .............................................................................................33
4.1.8 System..............................................................................................................................33
4.2 Shredder control panel......................................................................................34
4.2.1 Display: Baling press not in automatic mode....................................................................34
4.2.2 Display: Status of the baling press....................................................................................34
4.3 Initial start-up.....................................................................................................35
4.4 Using the machine.............................................................................................36
4.4.1 Fit the plastic bag and start the machine..........................................................................36
4.5 Ejecting and bagging the bale...........................................................................40
4.6 Malfunctions of the baling press........................................................................43
4.6.1 Error numbers...................................................................................................................43
4.7 Malfunctions of the shredder.............................................................................44
4.7.1 Overload due to paper jam ..............................................................................................44
4.7.2 Electric motor overheats...................................................................................................44
4.7.3 Emergency stop activated.................................................................................................44
4.7.4 Oil reservoir empty............................................................................................................45
4.8 Stopping the machine........................................................................................45
4.9 Outdoor use.......................................................................................................45
5 Inspection and maintenance work 46
5.1 Notes on maintenance.......................................................................................46
5.2 Maintenance of the combined press..................................................................47
5.2.1 Changing the hydraulic fluid / venting filter.......................................................................47
5.2.2 Lubricating the movable parts...........................................................................................48
5.3 Maintenance of the FA 500.3 shredder .............................................................49
5.3.1 Lubricating the drive chains and synchronized wheels (2 x per year)..............................49
5.3.2 Retighten the feed belt......................................................................................................50
5.3.3 Check the directional stability of the feed belt ..................................................................50
5.3.4 Check the feed belt for wear.............................................................................................50
5.3.5 Emptying the collecting tray..............................................................................................51
