HUANUO HNSSD6 User manual

Thank you for choosing our product! We strive to provide the best quality
and services for our customers. Would you kindly share your experience
on Amazon if you are satisfied? Should you have any issues, please don't
hesitate to contact us.
Telephone：[phone] Mon-Fri 10am - 6pm (PST) (USA) (CAN)
Email：[email protected] (US/CA/DE/UK/FR/IT/ES/JP/AU)
Installation Instruction V1.0
HNSSD6

828.6 mm/32.6”
125 mm-490 mm
4.9”-19.3”
735 mm/28.9”
420 mm/16.5”
819.4 mm/32.3”
453.2 mm/17.8”
315 mm/12.4”
DECBA
1
X6X1 X1 X2
≤28.6lbs
(≤13kg)
≤5lbs
(≤2kg)
A
B
A+B≤28.6 lbs (13kgs)
CAUTION: DO NOT EXCEED
MAXIMUM LISTED WEIGHT
CAPACITY, OR SERIOUS INJURY
AND/OR PROPERTY DAMAGE
MAY OCCUR!
Tools Required Not Included
Components
DO NOT place hands on or near support bars. Pinch points are
created during lifting and lowering the worksurface. Failure to
follow these instructions may result in serious personal injury.
WARNING
PINCH POINT
Features & Specifications
1

A
When carrying the lift table, be sure to hold the bottom with both hands.
Do not subject the table to a separate force. This can cause the tabletop
to be out of step with the bottom structure.
Warning:
Impact Hazard! Moving parts can
Crush and Cut.
Step 1
Step 2
2

Squeeze the side handle
Adjust height
490mm
125mm
B
C
D
Step 3
Step 4
Step 5
3

Keep the whole monitor and laptop
base on the work surface. Allowing
any part of base or stand to hang off
the edge may result in property
damage and/or personal injury.
Raise worksurface slowly. Raising
work surface too fast may create an
unstable situation resulting in
property damage and/or personal
injury.
To avoid the potential to pinch cables it
is important to follow the cable routing
instructions in this manual. Failure to
follow these instructions may result in
equipment damage and/or personal
injury.
Leave enough slack in cable to allow for
full range of vertical motion (19.3”/49
cm). Failure to heed this warning may
result in property damage and/or
personal injury.
E
Step 6
Step 7
4