Tools Needed (NOT lncluded)
Before getting started,
let's make sure this mount is compatible.
19.8 lbs
(9kg)
Is the VESA pattern
of your monitor 75 x 75mm
(3
x 3
″
) or 100 x 100mm
(3.9
x 3.9
″
)?
1
Does your monitor
(including accessories)
weigh less than 19.8 lbs
(9kg)?
2
Tools Needed
(not included)
3
Important Safety
Information
4
Yes – Perfect!
No – This mount is NOT
compatible.
Yes – Perfect!
No – This mount is NOT
compatible.
Electric Drill
(optional)
7/16-7/8″ (11-22mm)
Drill Bit (optional)
Phillips Screwdriver
W
H
NOTE
• Please carefully read all instructions before attempting installation.
If you DO NOT understand the instructions or have any questions
or concerns, please call technical support or email customer
service.
• Not all hardware included in this package will be used.
• This product contains small items that may pose a choking
hazard.
• This product contains gas spring arms which are under high
pressure. Do not puncture these arms or expose the arms to fire
or flame. If this product is defective, please call technical support
or email customer service.
• Do not use this product on desks made of particle board or other
soft woods.
• The information contained in this manual does not cover all
possible conditions or variables in relation to the installation of
this product.
WARNING
Avoid personal injuries and property damage!
• DO NOT use this product for any purpose that is NOT explicitly
specified in this manual. DO NOT exceed weight capacity. We are
NOT liable for damage or injury caused by improper mounting,
incorrect assembly or inappropriate use.
• Before starting assembly, verify all parts are included and
undamaged. DO NOT use damaged or defective parts. lf you
require replacement parts, please call technical support or email
customer service.
CAUTION
01 02 03 04 05 06 07 08 09 10 11 12 13
