HUANUO HNMUA1 User manual

Step 3 Attach the Decorative Covers to the Plastic Clips
1. Install the adapter brackets to the VESA plate(not included).
Please do not firmly the bolts in order not to affect the length
adjustment of the bracket assembly.
2. Adjust the size of the bracket assembly according to the size
of monitor. Then tighten all the nuts.
Model: HNMUA1
V3.0
Adapter Bracket Assembly
Installation Manual
Thank you for choosing this Huanuo product! At Huanuo we
strive to provide you with the best quality products and services
in the industry. Please share your experience of our product
with others on www.huanuoav.com/reviews if you are satisfied.
Should you have any issues, please don't hesitate to contact us.
Telephone: [phone] Mon-Fri 10am - 5pm (PST) (USA) (CAN)
Email: [email protected] (US/CA)
Website:
www.huanuoav.com
C
Option D
OR
A
EF
A
GI
H
VESA Plate (Not Included)
for VESA hole pattern:
3 x 3 in.(75 x 75mm),
4 x 4 in.(100 x100mm)
03

AP55mm
Bolt
D
Bolt
M6x16mm
E (x8)
SUPPLIED PARTS AND HARDWARE INCLUDED
ABD
STEP 1 Install the Monitor Clips to the Adapter Brackets
STEP 2
Install the Bracket Assembly to the VESA Plate(Not Included)
1. Install the adapter brackets to the VESA plate(not included).
Please do not firmly the bolts in order not to affect the length
adjustment of the bracket assembly.
2. Adjust the size of the bracket assembly according to the size
of monitor. Then tighten all the nuts.
IMPORTANT SAFETY INSTRUCTIONS
•Check package contents against Supplied Parts and Hardware List to assure
that all components were received undamaged. Do not use damaged or
defective parts. lf you require replacement parts, contact customer service at
[email protected]
•Carefully read all instructions before attempting installation. If you do not
understand the instructions or have any concerns or questions, please contact
customer service at [email protected]
•This product may contain moving parts. Use with caution.
•Do not use this product for any purpose that is not explicitly specified in this
manual.Do not exceed weight capacity. We cannot be liable for damage or
injury caused by improper mounting, incorrect assembly or inappropriate use.
•The adapter brackets can only be used for the monitors smaller than 27in.
Wrench
(Not Included)
Option A
M4 Nut
I (x8)
M4 Washer
H (x8)
M6 Nut
F (x8)
OR
A
EF
A
GI
H
OR
A
EF
A
GI
H
OR
A
EF
A
GI
H
Option B
1. Install the adapter brackets to the VESA plate(not included). Please do not firmly the bolts in
order not to affect the length adjustment of the bracket assembly.
2. Adjust the size of the bracket assembly according to the size of monitor. Then tighten all the
nuts.
Option C
VESA Plate (Not Included)
for VESA hole pattern:
3 x 3 in.(75 x 75mm),
4 x 4 in.(100 x100mm)
01 02
Bolt
M4x12mm
G (x8)