Huawei Beeline E1550 Instruction manual

Thank you for choosing Mobile Broadband E1550 USB
Stick ( hereinafter referred to as the E1550).
Note:
This manual briefly describes the appearance, the preparation and the process for
installing/uninstalling.
Getting to Know your E1550
The following figures show the appearance of the E1550. The actual product may differ.
4
5
1
2
3
3
nMicro SD card slot
Holds the Micro SD card.
oUSIM/SIM card slot
Holds the USIM/SIM card.
pLanyard Hole
ap and the E1550 together so that they will not be easily lost.Ties the c
Note:
The lanyard is an optional accessory. If it is not provided in the package, you can buy one
urself.
yo
qUSB connector
Connects to the USB interface of the PC.
red to the 3G/3G+ network.
t up.
rom the PC.
2. the Micro SD card into the card slots. Make sure that the
cards are properly inserted.
rIndicator
Indicates the status of the E1550.
zGreen, blinking twice every 3s: The E1550 is powered on.
zGreen, blinking once every 3s: The E1550 is registered to the 2G network.
zBlue, blinking once every 3s: The E1550 is registe
zGreen, always on: The 2G connection is set up.
zBlue, always on: The 3G connection is set up.
zCyan, always on: The 3G+ connection is se
zOff: The E1550 is removed f
Preparing the E1550
1. Take out of the back cover of the E1550.
Insert the USIM/SIM card and
zy. If the Micro SD card is not provided in the
z
ge the cards as well as the device,
and data stored on the cards may be corrupted.
Note:
Micro SD card is an optional accessor
package, you can buy one yourself.
Do not remove the USIM/SIM card and the Micro SD card when they are being used.
Removing the cards during an operation may dama

Installation Guide
The procedure for installing the management program depends on the operating system
ndows XP as an example.
installed on your PC. The following section takes Wi
Connecting the E1550 with a PC
Plug the E1550 into the USB interface of the PC.
ect the E1550 with the PC.
ote:
e AutoRun.exe file in the driver path.
of the management program is
the E1550 is connected to the PC, the management program is launched
automatically.
op to launch the management
se Start > Control Panel.
he
ote:
PC after the un-installation to ensure that the
letely uninstalled.
Installing the E1550 Management Program
1. Conn
2. The OS automatically detects and recognizes new hardware and starts the installation
wizard.
N
If the auto-run program does not respond, find th
Then double-click AutoRun.exe to run the program.
3. Follow the prompts of the installation wizard.
4. After the program is installed, the shortcut icon
displayed on the desktop.
Starting the Management Program
After the E1550 is installed, the management program is launched automatically. Then
every time
You can also double-click the shortcut icon on the deskt
program.
Uninstalling the Management Program
1. Choo
2. Find the management program, and click Add/Remove program to uninstall t
management program.
N
It is recommended to restart the
management program is comp
Removing th 1550e E
1. Double-click in the system tray. The Unplug or Eject Hardware interface is
displayed.
When the prompt "It is safe to remove the device" is displayed, remove the E1550.
ote:
efore removing the E1550, exit the management program.
Version: V100R001_01 Part Number: 31010AMH
2. Select the hardware related to the E1550 and click Stop.
3.
N
B