Huawei EC5805 User manual

Thank you for choosing
HUAWEI EC5805 Wireless
Modem (hereinafter
referred to as the EC5805).
zThe supported functions and actual
appearance are subject to your product
purchased. The following pictures are
provided for illustration only. For details
about your product selection, consult
your service provider.
zThis guide briefly describes the functions
of the EC5805. For details about how to
set the management parameters, see
the Help on the web management page.
zIf the EC5805 is placed in an
environment with poor ventilation, it will
get heated after used for a long time.
When the EC5805 gets heated to a
certain extent, it will switch off or
disconnect from the network
automatically to protect itself. In this
case, please expose the EC5805 in a
well-ventilated place for heat dissipation
and then restart the EC5805.

Getting to Know Your EC5805
Packing List
The package box contains the following
items. If any of the items is lost or damaged,
contact your local dealer.
Quick Start
Safety
Information
Main unit
Battery Data cable
Some of the optional accessories are not
provided in the package, you can contact
1

2
your local dealer to buy them yourself.

Application Scenarios
The Wi-Fi device or computer can be
connected to the Internet through the
EC5805. The actual connecting procedure
depends on the operating system of the
Wi-Fi device or computer. You can perform
the connection operations as prompted.
Scenario 1: Multi-device access via
Wi-Fi
Smart phone Game machine
Digital camera
Laptop
Scenario 2: One-device access via USB
3

Scenario 3: Multi-device access via
Wi-Fi and USB at the same time
Smart phone Game machine
Digital camera
Laptop
Appearance
4

No
. Item No . Item
1 Wi-Fi/WP
S
indicator 5 Signal
indicator
2 Wi-Fi/WP
S button 6 USB
connector
3 Power
button 7 External antenna
interface
4 Power
indicator
Indicat S
or tatus
5

6
Indicat
or Status
Wi-Fi/
WPS
z
zCon :
z
Off: The Wi-Fi and WPS
are disabled.
tinuously on in green
The Wi-Fi is enabled.
Blinking in green: The
WPS is enabled.
P
zbat
low
imm
the
zn
The battery po
zbat .
ower
Blinking in red: The
tery power level is very
and must be charged
ediately; otherwise
EC5805 will be
powered off.
Co tinuously on in red:
wer level is
weak.
Blinking in green: The
tery is being charged
zn:
s
eno
Continuously on in gree
The battery power level i
ugh.
S
z
exis
not
inex
ignal
Continuously on in red:
The UIM card does not
t or the PIN code is
verified or the signal is
istent.

Indicat
or Status
zThe
zThe
zdial
zdial ing
Continuously on in green:
EC5805 is in the
normal state.
Continuously on in blue:
EC5805 is in the
roaming state.
Fast blinking in green:
ing up in the normal
state.
Fast blinking in blue:
ing up in the roam
state.
zWi-Fi: Wireless Fidelity
zWPS: Wi-Fi Protected Setup
Before You Start
Installing the Battery
Install the battery as shown in the following
gure.
fi
7

123
Installing the microSD Card
1. Remove the rubber cap from the
microSD card slot. Then insert the
microSD card into the slot.
After inserting the microSD card
2.
t
z
z
completely, attach the rubber cap.
No e:
The microSD card is an optional
accessory. If the microSD card is not
provided in the package, you can buy
one yourself.
To remove the microSD card, open the
rubber cap and press the microSD card
gently. When the microSD card pops up
8