Huawei EO-SG900 User manual

Printed in Korea
E Type. XXXXXX
07/2014 Rev.1.0

EO-SG900
User manual
www.samsung.com

2
Copyright
Copyright © 2014 Samsung Electronics
This guide is protected under
international copyright laws.
No part of this guide may be
reproduced, distributed, translated,
or transmitted in any form or by any
means, electronic or mechanical,
including photocopying, recording,
or storing in any information storage
and retrieval system, without the
prior written permission of Samsung
Electronics.
• Please read this manual before
using the device to ensure safe and
proper use.
• The illustrations in this user manual
may differ from the actual device.
Device specifications are subject to
change without prior notice and
this document may not have been
updated to reflect these changes.
• Bluetooth
®
is a registered trademark
of Bluetooth SIG, Inc. worldwide.

3
Device layout
Front
Status indicator
[Play/Stop] button
[Volume (-)] button
[Volume (+)] button
[Talk] button
NFC antenna
Microphone

4
Back
[Pairing ( )] button
[Power] switch
Audio input jack
Power connection
jack
• Check the product box for the wireless speaker, charger (USB power
adapter, USB cable), 3.5 mm audio cable, and user manual. The
items supplied with the device and available accessories may vary
by region.
• The status indicator is visible only when it is turned on.

5
Use only the battery charger
supplied with the product.
Using unapproved chargers
may slow down the
charging process or cause
damage to the product.
Charging the device
This device has a built-in battery.
Charge the battery completely
before using the device for the first
time or after it has not been used for
an extended period.
Connect the charger to the
Bluetooth speaker and plug the
power cord into the power outlet.

6
• The socket-outlet shall
be installed near the
equipment and shall be
easily accessible.
• The status indicator turns red
while the device is being charged.
The status indicator turns blue
when charging is complete.
• To save energy, unplug
the charger when not
in use. The charger does
not have a power switch,
so you must unplug the
charger from the electric
socket when not in use
to avoid wasting power.
The device should remain
close to the electric socket
while charging.

7
• Battery run time is
based on results of tests
performed with factory
default settings.
• The battery charging time
and run times may vary,
depending on the usage
environment.
Charging time and
standard run times
(3,600 mAh)
Charging
time Approx. 2.5 hrs
Standard
run times
Call time Approx.
15 hrs
Play time Approx.
15 hrs
Standby
time
Approx.
2,000 hrs

8
Charge level Indicator
colour
More than
80 % Blue
30–80 % Purple
Less than 30 % Red
Measuring the battery
charge
Press and hold the [Talk] and
[Volume (-)] buttons simultaneously.
The status indicator flashes 4 times
in different colours, according to the
charge left in the battery.

9
• When the device is turned on,
the status indicator flashes blue
4 times.
• When the device is turned off,
the status indicator turns blue
and then flashes red before
turning off.
Power on
Power off
Turning the device on
or off
Slide the [Power] switch to turn the
device on or off. When you turn on
the device for the first time, it enters
the Bluetooth pairing mode.

10
When connecting for the first time,
pair the wireless speaker with the
other Bluetooth-enabled device.
Keep the devices close to each other
while pairing or using the wireless
speaker.
Instructions for Bluetooth
connection or Bluetooth
connection via NFC may
vary by device. Refer to the
device’s user manual for
additional information.
Connecting to other
devices
You can connect the wireless
speaker to other Bluetooth-enabled
devices, such as smartphones,
tablets, or PCs. Also, if you have
devices that support the near field
communication (NFC) feature, you
can control the Bluetooth feature to
connect the devices to the wireless
speaker.

11
2
On the Bluetooth-enabled
device, access the Bluetooth
setup mode and search for
Bluetooth devices.
3
From the search results, select
the product name.
• When pairing is complete,
the wireless speaker appears
as“Connected”in the device
list.
Connecting via Bluetooth
1
Turn on the wireless speaker.
Press and hold the [Pairing ( )]
button for about 3 seconds.
• The wireless speaker enters
the Bluetooth pairing mode
and the status indicator turns
on blue.

12
Connecting via the NFC
function
1
Enable the NFC feature on the
other device.
2
Turn on the wireless speaker
and bring the other device’s
NFC antenna close to the NFC
antenna on the wireless speaker.

13
Ending the Bluetooth
connection
To disconnect the wireless speaker,
turn it off or disable the Bluetooth
functionality on the Bluetooth-
enabled device.
You can also bring the NFC antennas
together to end the Bluetooth
connection between the devices.
• If you are connecting a
smartphone to the device,
unlock the screen. The NFC
feature may not work when
the smartphone screen is
locked.
• End the Bluetooth
connection between the
product and any other device
first. The NFC function is
not available while another
device is connected to the
Bluetooth speaker.

14
Connecting via an audio
cable
You can connect your smartphone
or a media player to the wireless
speaker with an audio cable.
End the Bluetooth connection
between the product and any other
device before making a connetion
with the audio cable.

15
Playing audio
Play audio from your smartphone,
multimedia player, or PC.
• Adjust the volume with the
[Volume (+)/(-)] buttons.
• A notification will sound when
the speaker volume reaches its
maximum value. If the sound is
not loud enough even with the
speaker volume set to maximum,
adjust the volume of the
connected device.
Using the wireless
speaker
When the wireless speaker is
connected to a Bluetooth or NFC-
enabled device, you can play audio
on the wireless speaker or use it as
a speaker phone. While a device is
connected to the Bluetooth speaker,
you can press the [Talk] button
to turn on the voice recognition
feature of the connected device (if
available).

16
• Some device may allow
you to control only the
volume.
• The audio cable
connection allows you to
control only the volume.
Receiving a call
If a smartphone is connected to the
wireless speaker, you can press the
[Talk] button to answer a call.
• Press the [Play/Stop] button to
pause or resume playback.
• Press the [Play/Stop] button twice
to skip to the next file.

17
If an incoming call is detected
during a call, the indicator flashes
blue 2 times and the ringtone will
sound.
• Press the [Talk] button to end
the current call and answer the
incoming call.
• Press and hold the [Talk] button to
hold the current call and answer
the incoming call.
• Press and hold the [Talk] button to
switch between calls.
• Press and hold the [Talk] button to
reject a call.
• Press the [Talk] button to end
a call.
• Press the [Volume (+)/(-)] buttons
to adjust the volume.
• Press the [Play/Stop] button to
mute or unmute the microphone.
• Press and hold the [Talk] button to
pause or resume a call.

18
• The Samsung Level
application is compatible
with Samsung mobile
devices running Android
operating system 4.2.2 or
later. Depending on your
device’s specifications, a
partially blank screen may
appear or some functions
may not work on your
device.
• To use the application,
ensure that the devices
are connected via the
Bluetooth feature.
Samsung Level
On the connected device, download
the Samsung Level application
from Google Play Store or Samsung
Apps. Launch this application to use
various functions.

19
Bluetooth
version
Supported
Bluetooth
profile
Wireless
connection
range
NFC
frequency
Operating
temperature
Specifications and
features
Dimensions
(mm)
Weight
Transmission
power
Bluetooth
frequency