Huawei eAN3810A Manual

eAN3810A
V100R001C00
Hardware Installation Guide
Issue
01
Date
2017-04-30
HUAWEI TECHNOLOGIES CO., LTD.

Issue 01 (2017-04-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
i
Copyright © Huawei Technologies Co., Ltd. 2016. All rights reserved.
No part of this document may be reproduced or transmitted in any form or by any means without prior
written consent of Huawei Technologies Co., Ltd.
Trademarks and Permissions
and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd.
All other trademarks and trade names mentioned in this document are the property of their respective
holders.
Notice
The purchased products, services and features are stipulated by the contract made between Huawei and
the customer. All or part of the products, services and features described in this document may not be
within the purchase scope or the usage scope. Unless otherwise specified in the contract, all statements,
information, and recommendations in this document are provided "AS IS" without warranties, guarantees or
representations of any kind, either express or implied.
The information in this document is subject to change without notice. Every effort has been made in the
preparation of this document to ensure accuracy of the contents, but all statements, information, and
recommendations in this document do not constitute a warranty of any kind, express or implied.
Huawei Technologies Co., Ltd.
Address:
Huawei Industrial Base
Bantian, Longgang
Shenzhen 518129
People's Republic of China
Website:
http://www.huawei.com
Email:
[email protected]

eAN3810A
Hardware Installation Guide
1 eAN3810A Hardware Installation Guide
Issue 01 (2017-04-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
1
1 eAN3810A Hardware Installation Guide
About This Chapter
Overview
This document describes the process of installing eAN3810A.
Product Version
Unless otherwise stated, "eNodeB", "Pico", "eAN", and "AirNode" in this document refer to the 3810
series AirNode.
The 3810 seriesAirNode is a base station that provides communications services in Huawei
OneAir solution. The following table lists the product name and product version related to the
3810 seriesAirNode.
Product Name
Product Version
eAN3810A
V100R001C00
Intended Audience
This document is intended for installation engineers.
Organization
1.1 Installation Preparations
Before starting the installation, you must obtain the required reference documents, tools, and
instruments, and familiarize yourself with the skills required.
1.2 Information About the Installation
This section describes the information that you must be familiar with before installing a
eAN3810A, including the eAN3810A hardward infomation, installation scenarios, installation
space and environment requirements.
1.3 Unpacking the Equipment

eAN3810A
Hardware Installation Guide
1 eAN3810A Hardware Installation Guide
Issue 01 (2017-04-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
2
This section describes how to unpack and check the delivered equipment to ensure that all the
materials are included and intact.
1.4 Installation Process
This section describes the eAN3810A installation process.
1.5 Obtaining the ESN
Before installing the eAN3810A, record its electronic serial number (ESN) for future use
during commissioning.
1.6 (Optional) Installing a Micro SD Card
This section describes how to install a micro SD card in the eAN3810A.
1.7 Installing the eAN3810A
This section describes the eAN3810A installation process.
1.8 Installing the Auxiliary Devices
This section describes the procedure and precautions for installing the auxiliary devices.
1.9 Installing Cables
This section describes the procedures for installing eAN3810A cables and auxiliary devices
cables.
1.10 Checking Hardware Installation
eAN3810Ahardware installation checking includes hardware and cable installation checking.
1.11 Power-On Check on the eAN3810A
This section describes the procedure for performing a power-on check on the eAN3810A.
1.12 Appendix
This section describes reference information during installation.
1.1 Installation Preparations
Before starting the installation, you must obtain the required reference documents, tools, and
instruments, and familiarize yourself with the skills required.
1.1.1 Reference Documents
Before the installation, you must be familiar with reference documents.
The following reference documents are required during eAN3810A installation:
Health and Safety
Equipment Safety
eAN3810A Hardware Description
1.1.2 Tools and Instruments
You must prepare the following tools and instruments before the installation.

eAN3810A
Hardware Installation Guide
1 eAN3810A Hardware Installation Guide
Issue 01 (2017-04-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3
Hammer drill (a φ12 bit)
ESD gloves
Vacuum cleaner
Heat gun
Phillips screwdriver (M3
to M6)
Flat-head screwdriver
(M3 to M6)
Rubber mallet
COAX crimping tool
Wire stripper
Power cable crimping tool
RJ45 crimping tool
Diagonal plier
Utility knife
Level
Network cable tester
Adjustable wrench (size ≥ 32 mm
[1.26 in.])
Torque wrench
Size: 16 mm (0.63 in.) and 22 mm
(0.87 in.)
Combination wrench
Size: 16 mm (0.63 in.) and 22 mm
(0.87 in.)
Torque screwdriver
3mm or 5mm
(M3 to M6)
(M3 to M6)
Marker (diameter ≤ 10
mm [0.39 in.])
Torque socket (M6 or M10)
Multimeter
Measuring tape

eAN3810A
Hardware Installation Guide
1 eAN3810A Hardware Installation Guide
Issue 01 (2017-04-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4
Fixed pulley(weight-bearing
capacity > 500 kg or 1102.5 lb)
Lifting sling
Ladder
1.1.3 Requirements for Installation Personnel
This section describes requirements for installation engineers. They must be qualified and
trained, and familiar with correct operation methods and safety precautions before performing
any operations.
Before the installation, pay attention to the following items:
Technical engineers must take Huawei training and be familiar with proper installation
and operation methods.
The number of installation personnel depends on the engineering schedule and
installation environment. Generally, two to three persons are required. Generally, only
three to five onsite personnel are necessary.
1.2 Information About the Installation
This section describes the information that you must be familiar with before installing a
eAN3810A, including the eAN3810A hardward infomation, installation scenarios, installation
space and environment requirements.
1.2.1 Hardware Device Information
This section describes the hardware information you should know before installing the
eAN3810A.
eAN3810Ahardware includes eAN3810A main equipment, auxiliary devices, mounting kits,
and cables. For details, see sections in eAN3810A Hardware Description, which are listed in
Table 1-1.
Table 1-1 Hardware information
Category
Sections in eAN3810A Hardware
Description
eAN3810A main equipment
eAN3810A Exterior
eAN3810A Ports

eAN3810A
Hardware Installation Guide
1 eAN3810A Hardware Installation Guide
Issue 01 (2017-04-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5
Category
Sections in eAN3810A Hardware
Description
eAN3810A Indicators
Auxiliary device
PSE
Dock
Mounting kits
eAN3810A Mounting Kits
Dock Mounting Kits
Cables
Cable List
1.2.2 Installation Options and Restrictions
The eAN3810Acan be installed on a wall or pole. Installation scenarios must meet
heat-dissipation and waterproofing requirements of the eAN3810A.
Installation on a Pole
Figure 1-1 shows the diameter of a pole for installing an eAN3810A.
Figure 1-1 Diameter of a pole for installing a eAN3810A
The diameter of a pole for installing a eAN3810A ranges from 48 mm (1.89 in.) to 114
mm (4.49 in.). The recommended diameter is 60 mm (2.36 in.).
The recommended thickness of the pole wall is 3.5 mm (0.14 in.) or above.
Figure 1-2 shows the eAN3810Ainstalled on a pole.

eAN3810A
Hardware Installation Guide
1 eAN3810A Hardware Installation Guide
Issue 01 (2017-04-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6
Figure 1-2 AeAN3810Ainstalled on a pole
Installation on a Wall
The wall for installing eAN3810Amust meet the following requirements:
The wall can bear a load at least four times the weight of a eAN3810A.
The screws must be tightened with a torque of 30 N·m. This ensures the screws work
properly and the wall remains intact without cracks in it.
Figure 1-3 shows the eAN3810Ainstalled on a pole.

eAN3810A
Hardware Installation Guide
1 eAN3810A Hardware Installation Guide
Issue 01 (2017-04-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
7
Figure 1-3 AeAN3810Ainstalled on a wall
1.2.3 Installation Clearance and Space Requirements
This section describes the recommended and minimum clearances for a eAN3810A.
Clearance for a eAN3810A
When the eAN3810A is installed on a wall or pole, the minimum clearance is required for
easy cabling and operation and maintenance (O&M). Based on the engineering practice, the
recommendation for the installation clearance is provided.
The recommended clearances are for customers, ensuring normal running and providing
appropriate space for O&M. If installation space is sufficient, leave the recommended
clearances after installing equipment.
The minimum clearance ensures normal operation and heat dissipation, but O&M
activities such as checking indicator status and opening the cover plate of a cabling
cavity cannot be properly conducted. If installation space is restricted, leave the
minimum clearance after installing equipment.
Figure 1-4 show the clearances for installing a eAN3810A.

eAN3810A
Hardware Installation Guide
1 eAN3810A Hardware Installation Guide
Issue 01 (2017-04-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
8
Figure 1-4 Clearances for installing a eAN3810A
Installation Spacing Between eAN3810A
Figure 1-5 lists the horizonta spacing between eAN3810A.