Huawei H352-381 User manual

Quick Start Guide
Pika-aloitusopas
Hurtigstartguide
Hurtigstartveiledning
Snabbstartsguide
Sparčiosios paleisties vadovas
Īsa pamācība
Kiirtutvustus
Schnellanleitung
Stručná úvodní příručka
Skrócona instrukcja obsługi
Ръководство за бърз старт
Ghid de pornire rapidă
Οδηγός γρήγορης έναρξης
H352-381 150304-1011

Quick Start Guide........................................................ 1
Pika-aloitusopas.......................................................... 28
Hurtigstartguide........................................................... 55
Hurtigstartveiledning.................................................... 83
Snabbstartsguide........................................................ 111
Sparčiosios paleisties vadovas................................... 139
Īsa pamācība.............................................................. 167
Kiirtutvustus................................................................ 195
Schnellanleitung......................................................... 223
Stručná úvodní příručka............................................. 251
Skrócona instrukcja obsługi....................................... 279
Ръководство за бърз старт...................................... 308
Ghid de pornire rapidă............................................... 336
Οδηγός γρήγορης έναρξης........................................ 364
Contents

1 1
Quick Start Guide
xxxxxx
xxxxxx
xxxxxx xxxxxxxx
xxxxxxxx
xxxxx
xxxxx
xxxxxxxxxx
CPE A 1.5 meter network cable An information label An SSID label
A base Screws and expansion bolts A pole-binding cable tie A power adapter
A hex key (φ2.5) A hex key (φ5.0) An outdoor waterproof network
cable kit (including round and
flat waterproof rubber plugs)
A cable clamp
Package Contents

2
It is recommended that you attach the SSID label to the power adapter, so that you can easily
view the default password and IP address when you need to.
xxxxxxxx
xxxxxxxx
xxxxx
xxxxx
xxxxxxxxxx
xxxxxxxx
xxxxxxxx
xxxxx
xxxxx
xxxxxxxxxx
LAN WAN&
POWER LAN WAN&
POWER
Reset Reset
Optional Accessories
If a 10-meter flat network cable is included in your package, use it with the standard
flat waterproof rubber plugs for outdoor installation, to ensure an optimal waterproof
performance.
A 10-meter flat network cable

32
The following tools and auxiliary materials are required for installation:
* If there is not a 10-meter flat network cable in the package, you can purchase a round or flat
network cable that is no longer than 30 meters, and use it with the standard waterproof rubber plugs
of the appropriate shape for outdoor installation, to ensure an optimal waterproof performance.
A pen A spirit level A hammer
A hammer drill A Cat-5e network cable* A Phillips screwdriver

4
Color Status Remarks
5G 4G
Green Steady on Signal strength: Strong
Yellow Steady on Signal strength: Medium
Red Steady on Signal strength: Weak
Blinking Failed to recognize the SIM card/Network unavailable
Indicator
Appearance
1
2
3 4
5
1 Network cable socket connector 2 SIM card cover
3 5G signal indicator 4 4G signal indicator
5 Mounting bracket

4 5
Power Adapter
4
1
2
3
6
5
LAN WAN&
POWER
Reset
1 Power button 2 Power indicator 3 LAN port
4 Reset button 5 WAN&POWER port 6 Power port
Avoid connecting the WAN&POWER port (the blue one) to any other devices, as this may
cause damage to the devices.

6
Outdoor Installation Instructions
To install and configure the CPE, perform the following:
Step Operation
1 Insert the SIM Card and Lock the SIM Card Cover
2 Insert the Network Cable and Secure the Waterproof Kit in Place
3 Connect and Power On the Power Adapter
4 Select an Installation Location Where the Signal is Strong
5 Install the CPE Outdoors
6 Route the Network Cable Through a Window or Wall
7 Connect to an Indoor Router
8 Connect the Device to the Indoor Router via Wi-Fi or Using the Network
Cable

6 7
1 Insert the SIM Card and Lock the SIM Card Cover
mini-SIM (2FF) micro-SIM (3FF) nano-SIM (4FF)

8
2 Insert the Network Cable and Secure the Waterproof Kit
in Place

8 9
3 Connect and Power On the Power Adapter
Connect the power adapter to the CPE, and then connect the power adapter to the
power supply.
LAN WAN&
POWER
LAN WAN&
POWER
Reset
Reset
xxxxxxxx
xxxxxxxx
xxxxx
xxxxx
xxxxxxxxxx
xxxxxxxx
xxxxxxxx
xxxxx
xxxxx
xxxxxxxxxx

10
Power on the power adapter.
LAN WAN&
POWER
Reset
xxxxxxxx
xxxxxxxx
xxxxx
xxxxx
xxxxxxxxxx
The CPE will automatically power on and search for available wireless networks. If
the indicator is steady on, the CPE has successfully connected to the network.
5G/4G signal indicator Steady on Green/Yellow/Red Signal strength:
Strong/Medium/Weak

10 11
4 Select an Installation Location Where the Signal is Strong
4.1 Connect the mobile phone or laptop to the CPE via Wi-Fi.
xxxxxxxx
xxxxxxxx
xxxxx
xxxxx
xxxxxxxxxx
LAN WAN&
POWER
Reset

12
A desktop computer must be connected to the CPE network via an indoor router.
Connect the indoor router to the power adapter and desktop computer.
Password LAN WAN
xxxxxx
xxx.xxx.xxx.x
xxxxxxxx
xxxxxxxx
xxxxx
xxxxx
xxxxxxxxxx
LAN WAN&
POWER
LAN WAN
Reset
4.2 Open a browser on your mobile phone or computer, and log in to the CPE
management page. (For the default IP address and password, see the CPE
nameplate.)
Password LAN WAN
xxxxxx
xxx.xxx.xxx.x
xxxxxxxx
xxxxxxxx
xxxxx
xxxxx
xxxxxxxxxx
LAN WAN&
POWER
LAN WAN
Password xxxxxx
xxx.xxx.xxx.x
xxx.xxx.xxx.x
Password
xxxxxx
Reset

12 13
4.3 Change the default Wi-Fi name, password, and login password as prompted.
Once the Wi-Fi name or password is changed, you need to reconnect your mobile phone or
computer to the CPE to use Wi-Fi.
4.4 Use the new password to log in to the management page.
4.5 On the management home page, click Check location signal.
XXX.XXX.XXX.X
Disable Mobile Data
Check location signal

14
4.6 Measure the signal strength at the recommended installation location as
prompted, and find the position with the strongest signal strength.
The CPE can be mounted to a pole or wall, and must be within a 45-degree shielding angle of
the lightning rod.
45° 45°
XXX.XXX.XXX.X
Check location signal
Test Results
Excellent location
Score: 100
Excellent Poor

14 15
5 Install the CPE Outdoors
The CPE can be installed on a pole, or on a wall. Choose an appropriate installation
position.
Method 1: Pole-mounted installation
123
4.8 cm~14 cm

16
4 5

16 17
Method 2: Wall-mounted installation
90°
123
4 5