Huba Control 699 User manual

1
Huba Control AG - 699/full - Edition 08/2012 - 114507
699
Relative, vacuum and differential pressure transmitter
Operating instructions
SUNSTAR传感与控制 http://www.sensor-ic.com/ TEL:[phone] FAX:[phone] E-MAIL:[email protected]
SUNSTAR自动化 http://www.sensor-ic.com/ TEL: [phone] FAX:[phone] E-MAIL:[email protected]

2Huba Control AG - 699/full - Edition 08/2012 - 114507
Before operating refer to the instruction manual!
Any person entrusted with the set-up or operation of the device, must have read
and understood this operation manual, in particular all safety notes.The guarantee is
invalid in respect of damage resulting from a failure to follow the instructions, incorrect handling
or inappropriate use. We accept no responsibility for consequential damages resulting from any
of the above.
Safety information
General information
In order to ensure safe operation, the device may only be operated in accordance to the specifica-
tions stated in this operation manual. Futhermore, all legal and safety regulations concerning this
specific application should be observed.This also applies to the use of accessories.
Correct use to the intended purpose
These devices are designed for indication and monitoring of process variables. All other forms of
usage do not comply with the intended purpose. These sensors may not be used solely as means for
prevention of dangerous machine and system conditions. Machines and systems must be constructed
in such a way, that faulty states cannot lead to a dangerous situation for the operating staff (e.g. due
to independent limit switches, mechanical interlocking devices, etc.).
Qualified staff
The devices may only be installed, connected, set-up and operated by qualified staff and in comp-
liance with the technical specifications. Qualified staff is defined as persons, who are familiar with
set-up, mounting, start-up and operation of this device and who possess a recognized degree or
certificate of appropriate professional training.
Remaining hazards
These sensors employ state-of-the-art technology and are safe to operate. However, if they are
installed and operated by unqualified staff, an element of risk remains.
In this manual the remaining risks are marked by the following symbol:
This symbol is posted where there is a risk of serious injury or death or the damage of
material and property, if the warning is ignored
English
SUNSTAR传感与控制 http://www.sensor-ic.com/ TEL:[phone] FAX:[phone] E-MAIL:[email protected]
SUNSTAR自动化 http://www.sensor-ic.com/ TEL: [phone] FAX:[phone] E-MAIL:[email protected]

3
Huba Control AG - 699/full - Edition 08/2012 - 114507
Installation and set-up instructions
Even though the device is excellently protected against electro-magnetic interference, installation and
cabling must be carried out correctly to ensure interference immunity.
1. Use shielded cables for the signal and control lines with the connecting lead of the screen being
kept as short as possible. The connection point of the shielding depends on the existing connection
conditions.
2. Never route signal and control cables together with the trunk line or feeder cables of motors,
cylinder coils, rectifiers etc. The cables must be routed in conductive and grounded cable
conduits. This applies especially to long-distance cables, or environments in which the cables
are exposed to strong radio waves from broad casting stations.
3. Signal lines should be installed in mounting cabinets and as far away as possible from contactors,
control relays, transformers and other sources of interference.
4. Fix plug screw only with closed cover
Mounting
Prior to mounting or removing the sensor it must be verified that the system is depressurized.
Do not mount sensors in locations subject to high pressure pulses.
Significant thermal changes in the sensor environment can lead to a zero shift. As a result, the
measuring value displayed in a depressurized state will not read zero. This kind of drift can be
corrected by zero point reset.
Supply from SELV or class 2 source limited energy circuit 15 W or less
Use Copper conductors only
Further information
Voltage version 0 ... 5, 0 ... 10V
Please consider a possible fall of voltage in the GND supply especially in connection with the use of
the display and display lighting. Recommended is a short cable with a large crosssection.
To prevent over-heating the display lighting swtiches off automatically with higher temperatures.
SUNSTAR传感与控制 http://www.sensor-ic.com/ TEL:[phone] FAX:[phone] E-MAIL:[email protected]
SUNSTAR自动化 http://www.sensor-ic.com/ TEL: [phone] FAX:[phone] E-MAIL:[email protected]

4Huba Control AG - 699/full - Edition 08/2012 - 114507
ZP = Push Zero point reset.
The installation position is variable
by using the zero point reset button.
Pressure variations are resettable
after installation.
Ensure the power supply is not
interrupted when storing customer settings (ZP reset,).
Installation arrangement
Universal
2 and 3 wire
Connection diagrams
3 wire2 wire
Recommended installation arrangement:
vertical, with pressure connections facing downward,
drain of possible condensed water (factory calibration).
Notice: Mount the transmitter with minimum 10 mm distance to
magnetic material. If this is not possible there is a failure of up to
minus 1 Pa for transmitters mounted on sheet steel.
ZP
SUNSTAR传感与控制 http://www.sensor-ic.com/ TEL:[phone] FAX:[phone] E-MAIL:[email protected]
SUNSTAR自动化 http://www.sensor-ic.com/ TEL: [phone] FAX:[phone] E-MAIL:[email protected]

5
Huba Control AG - 699/full - Edition 08/2012 - 114507
Version with measurement configuration only
(Adjustability 1)
1) Pressure range
2) Customized factory adjustment
3) DIP-Switch position according to factory adjustment (see inside cover)
1. DIP-Switch (dual)
2. Zero point reset
3. Connecting terminals
4. Pressure connectors
P1 and P2
1
2
3
4
Pressure range 1)
Range00
Range01
Range10
customer adjustment 2)
1
0
3)
SUNSTAR传感与控制 http://www.sensor-ic.com/ TEL:[phone] FAX:[phone] E-MAIL:[email protected]
SUNSTAR自动化 http://www.sensor-ic.com/ TEL: [phone] FAX:[phone] E-MAIL:[email protected]

6Huba Control AG - 699/full - Edition 08/2012 - 114507
Complete configurable version
(Adjustability 2)
1. DIP-Switch (tenfold)
2. Zero point reset
3. Connecting terminals
4. Pressure connectors
P1 and P2
5. Turbo potentiometer
(Signal amplifications potentiometer)
6. LCD (by adjustability 3 only)
7. LCD receptacle
1
2
3
5
4
6
1
2
7
5
3
4
(Adjustability 3 - with display)
SUNSTAR传感与控制 http://www.sensor-ic.com/ TEL:[phone] FAX:[phone] E-MAIL:[email protected]
SUNSTAR自动化 http://www.sensor-ic.com/ TEL: [phone] FAX:[phone] E-MAIL:[email protected]

7
Huba Control AG - 699/full - Edition 08/2012 - 114507
1 2 3 4 5 6 7 8 9 10
Adjustable pressure ranges
1) Pressure ranges
2) DIP-Switch position according to factory adjustment (see inside cover)
Factory Settings
Pressure Range00
range
1)
Range01
Range10
Output 0 ... 10 V 3W
0 ... 20 mA 3W
4 ... 20 mA 3W
4 ... 20 mA 2W
Filter off: 0 / on: 1 x
Signal linear: 0 / root extracted: 1 x
0 0
0 1
1 0
1 1 0 0 0 0
0 1 1 1 0 1
0 1 1 0 0 1
0 0 1 1 1 0
2)
1
0
3 4 5 6 7 8 9 10
Output
0
... 1
0
V
3
W
0
... 2
0
mA
3W
4 ... 2
0
mA 3
W
4 ... 2
0
mA 2
W
Fil
te
r
off: 0 / on: 1 x
Signal
linear: 0 / root extracted: 1 x
1 1 0 0 0 0
0 1 1 1 0 1
0 1 1 0 0 1
0 0 1 1 1 0
output
signal
100 %
linear
100 %
Pressure range
10 01 00
Range 00 (in mbar)
Range 01 (in mbar)
Range 10 (in mbar)
DIP-Switch position
1 2
1 2
1 2
1
0
1
0
1
0
1
0
0.5 1 3 5 10 16 25 50
0.3 0.5 1 3 5 10 16 25
0.3 0.3 0.5 1 3 5 10 16
switchable pressure ranges
SUNSTAR传感与控制 http://www.sensor-ic.com/ TEL:[phone] FAX:[phone] E-MAIL:[email protected]
SUNSTAR自动化 http://www.sensor-ic.com/ TEL: [phone] FAX:[phone] E-MAIL:[email protected]

8Huba Control AG - 699/full - Edition 08/2012 - 114507
output signal
100 %
linear 100 %
Pressure range
10 01 00
10 01 00
270À
Adjustable full scale pressure inside the pressure ranges
With turbo potentiometer it`s possible to make additional
continuously variable adjustment inside the pressure ranges.
ouput signal
100 %
linear 100 %
Pressure range
10 01 00
10 01 00
SUNSTAR传感与控制 http://www.sensor-ic.com/ TEL:[phone] FAX:[phone] E-MAIL:[email protected]
SUNSTAR自动化 http://www.sensor-ic.com/ TEL: [phone] FAX:[phone] E-MAIL:[email protected]

9
Huba Control AG - 699/full - Edition 08/2012 - 114507
Adjustable output signals
1 2 3 4 5 6 7 8 9 10
Factory Settings
Pressure Range00
range Range01
Range10
Output
1)
0 ... 10 V 3W
0 ... 20 mA 3W
4 ... 20 mA 3W
4 ... 20 mA 2W
Filter off: 0 / on: 1 x
Signal linear: 0 / root extracted: 1 x
0 0
0 1
1 0
1 1 0 0 0 0
0 1 1 1 0 1
0 1 1 0 0 1
0 0 1 1 1 0
1
0
9 10
Filter
off: 0 / on: 1 x
S
igna
l
linear: 0 / root extracted: 1 x
1 2
P
r
essu
r
e
Ran
g
e
00
range
Ran
g
e0
1
Range10
g
0 0
0 1
1 0
0 ... 10 V
0 ... 20 mA
4 ... 20 mA
4 ... 20 mA
2 wire
3 wire
3 wire
3 wire
DIP-Switch position output signal Connection
diagrams
1
0
1
0
1
0
1
0
3 4 5 6 7 8
3 4 5 6 7 8
3 4 5 6 7 8
3 4 5 6 7 8
0 ... 5 V*
* 0-5V only possibile with adjustability 3 - adjust via menu control
1) four possible setting options, otherwise an output error may occur
SUNSTAR传感与控制 http://www.sensor-ic.com/ TEL:[phone] FAX:[phone] E-MAIL:[email protected]
SUNSTAR自动化 http://www.sensor-ic.com/ TEL: [phone] FAX:[phone] E-MAIL:[email protected]

10 Huba Control AG - 699/full - Edition 08/2012 - 114507
Adjustable filter fuction
Filter off
Filter on (1 sec.)
other response time on
request
1 2 3 4 5 6 7 8 9 10
Factory Settings
Pressure Range00
range Range01
Range10
Output 0 ... 10 V 3W
0 ... 20 mA 3W
4 ... 20 mA 3W
4 ... 20 mA 2W
Filter off: 0 / on: 1 x
Signal linear: 0 / root extracted: 1 x
0 0
0 1
1 0
1 1 0 0 0 0
0 1 1 1 0 1
0 1 1 0 0 1
0 0 1 1 1 0
1
0
1 2 3 4 5 6 7 8
P
ressur
e
Ran
g
e
00
range
Ran
g
e
01
Range10
g
Output
0
... 1
0
V
3W
0
... 2
0
mA
3
W
4 ... 2
0
mA 3W
4 ... 20 mA 2W
0 0
0 1
1 0
0 0 0 0
1 1
1 1 0 1
0 1
1 0 0 1
0 1
1 1 1 0
0 0
10
Signa
l
linear: 0 / root extracted: 1 x
DIP-Switch position
ATTENTION:
Filter ıon„ = Other filter
response time are selec-
table via software - only
possible with adjustability
3 (see menu control)
1
0
9
1
0
9
100%
63%
τtime
SUNSTAR传感与控制 http://www.sensor-ic.com/ TEL:[phone] FAX:[phone] E-MAIL:[email protected]
SUNSTAR自动化 http://www.sensor-ic.com/ TEL: [phone] FAX:[phone] E-MAIL:[email protected]

11
Huba Control AG - 699/full - Edition 08/2012 - 114507
Adjustable reponse curve
DIP-Switch position
output
signal
100 %
root extracted
100 %
Pressure range
10
01
01
00
00
1
0
10
Factory Settings
Pressure Range00
range Range01
Range10
Output 0 ... 10 V 3W
0 ... 20 mA 3W
4 ... 20 mA 3W
4 ... 20 mA 2W
Filter off: 0 / on: 1 x
Signal linear: 0 / root extracted: 1 x
0 0
0 1
1 0
1 1 0 0 0 0
0 1 1 1 0 1
0 1 1 0 0 1
0 0 1 1 1 0
1
0
1 2 3 4 5 6 7 8 9 10
P
r
essu
r
e
Ran
g
e
00
range
Ran
g
e
01
Range10
g
O
utput
0
... 1
0
V
3W
0
... 2
0
mA
3W
4 ... 2
0
mA
3W
4 ... 2
0
mA 2
W
Fi
lte
r
off: 0 / on: 1 x
0 0
0 1
1 0
1 1 0 0 0 0
0 1 1 1 0 1
0 1 1 0 0 1
0 0 1 1 1 0
1 2
3
4
5
6
7
8
9
d
1
0
10
response curve
output
signal
100 %
linear 100 %
Pressure range
10 01 00
linear
SUNSTAR传感与控制 http://www.sensor-ic.com/ TEL:[phone] FAX:[phone] E-MAIL:[email protected]
SUNSTAR自动化 http://www.sensor-ic.com/ TEL: [phone] FAX:[phone] E-MAIL:[email protected]

Menu control

PEDU
2IIVHW
]HUR
PHQX 2IIVHW
WRRKLJK
$GMXVW
]HUR2.
)6PEDU

7XUERSRWHQWLRPHWHU PHQX
'LVSOD\
3UHVVXUH
'LVSOD\ PHQX
8QLW
PEDU
8QLW PHQX
1RUPDO GLVSOD\ PHQX
'LVSOD\"
)6
PHQX
'LVSOD\"
3UHVVXUH
PHQX
8QLW"
PEDU
PHQX
6DYHG6HW
8QLW"
3D
PHQX
8QLW"
N3D
PHQX
8QLW"
K3D
PHQX
8QLW"
LQ+2
PHQX
8QLW"
PP:V
PHQX
2XWSXW
9
2XWSXW VLJQDO PHQX
2XWSXW"
9
PHQX
2XWSXW"
9
PHQX
2XWSXW"
P$
PHQX
2XWSXW"
P$
PHQX
6DYHG6HW

2XWSXW"
P$
PHQX

long keypress
short keypress
SUNSTAR传感与控制 http://www.sensor-ic.com/ TEL:[phone] FAX:[phone] E-MAIL:[email protected]
SUNSTAR自动化 http://www.sensor-ic.com/ TEL: [phone] FAX:[phone] E-MAIL:[email protected]

5DQJH

2XWSXW DWWLWXGH PHQX
/LJKW
RQ
'LVSOD\ OLJKW PHQX
6HULDO
6HULDO1R PHQX
)DFWRU\
5HVHW"
)DFWRU\ DGMXVWPHQW PHQX
5DQJH"

PHQX
5DQJH"

PHQX
5DQJH"

PHQX
5DQJH"

PHQX
/LJKW"
RII
PHQX
/LJKW"
PLQ
PHQX

F
PHQX

$[[
PHQX
Y
D
PHQX
8SWLPHV

PHQX
5HDOO\"
PHQX
6DYHG6HW
6DYHG6HW
6DYHG6HW
6DYHG6HW
)LOWHU
V
)LOWHU PHQX
)LOWHU"
V
PHQX
)LOWHU"
V
PHQX
)LOWHU"
V
PHQX
)LOWHU"
V
PHQX
6DYHG6HW

/LJKW"
RQ
PHQX
8SWLPHK

PHQX
7UDFH

PHQX
QR6DYH
$GMXVWPHQWRQO\ZKHQWKLVLVFRQILJXUHGYLD',36ZLWFK
SUNSTAR传感与控制 http://www.sensor-ic.com/ TEL:[phone] FAX:[phone] E-MAIL:[email protected]
SUNSTAR自动化 http://www.sensor-ic.com/ TEL: [phone] FAX:[phone] E-MAIL:[email protected]

14 Huba Control AG - 699/full - Edition 08/2012 - 114507
Menu descriptions
Normal Display Pressure display in selected
pressure range
Turbo-Poti Display full scale pressure adjust-
ment by turpopotentiometer
Display Selection of display the pressure or
% full scale
Unit Select pressure unit (no direct conversion
of the pressure unit - see order code selection table)
Output signal Select the output signal
Output attitude Parallel moving or adjustment of
pressure range
Out
100 %
0 %
0 % Pressure 100%
Out
100 %
Zero @ 10%
-10 % Pressure 90%
Out
100 %
Zero @ 50%
Max. under
pressure
-1mbar
-100% 0 % 100%
Pressure
SUNSTAR传感与控制 http://www.sensor-ic.com/ TEL:[phone] FAX:[phone] E-MAIL:[email protected]
SUNSTAR自动化 http://www.sensor-ic.com/ TEL: [phone] FAX:[phone] E-MAIL:[email protected]

15
Huba Control AG - 699/full - Edition 08/2012 - 114507
Filter Select response time at pressure
changes
Display light Select light - on/off and automatic
power shut-off after 5 min.
Serial number Product information -
reference only
Factory Adjustment Software reset to factory setting
according specification plate and
DIP-Switch position
SUNSTAR传感与控制 http://www.sensor-ic.com/ TEL:[phone] FAX:[phone] E-MAIL:[email protected]
SUNSTAR自动化 http://www.sensor-ic.com/ TEL: [phone] FAX:[phone] E-MAIL:[email protected]

16 Huba Control AG - 699/full - Edition 08/2012 - 114507
Elektromagnetische Verträglichkeit
Electromagnetic compatibility
Compatibilité électromagnétique
CE-konform gemäss EN 61326-2-3.
CE conformity according EN 61326-2-3.
Conformité (CEM) selon EN 61326-2-3.
Angaben auf Leistungschild (Druckbereich, Ausgang/Speisung,
Anschlussschema und Artikelnummer) entsprechen der Werksein-
stellung. Aufgrund von kundenseitiger Konfigurationen können
die Einstellungen von diesen Angaben abweichen. Bevor das Gerät
konfiguriert wird, sollte die Bedienungsanleitung beachtet werden.
The factory setting information (pressure range, output / power
supply, connection diagram and article no.) is located on the
specification label. Because of customer configuration the settings
can differ from this information and before the device is configured
please refer to the operating manual.
Les données présentes sur la plaque signalétique (plage de pression,
sortie/alimentation, schéma de raccordement et numéro dÊarticle)
correspondent au réglage dÊusine. En raison dÊune configuration
personnalisée du client, les réglages peuvent être différents de ces
données. Avant de configurer lÊappareil, il convient de tenir compte
du mode dÊemploi.
SUNSTAR传感与控制 http://www.sensor-ic.com/ TEL:[phone] FAX:[phone] E-MAIL:[email protected]
SUNSTAR自动化 http://www.sensor-ic.com/ TEL: [phone] FAX:[phone] E-MAIL:[email protected]