Hubbardton Forge Cavo Outdoor Sconce Small 303082 User manual

HUBBARDTONFORGE.COM
-, -   
154 RT. 30 SOUTH • CASTLETON, VERMONT 05735
32467
Installation Instructions
If you need further assistance, or nd that you are missing any parts, please contact the dealer from which you purchased this
product. We hope you enjoy your xture!
* Hubbardton Forge will not be liable for injury or damage caused by improper installation, lamping or use of this xture.
To Mount Fixture to Wall (Figures 1 & 2)
Component Parts
A Rubber Washer (2)
B Cupped Washer
C Green Ground Screw
D Wall Mount Bracket
E Machine Screws (not provided)
F Fixture Assembly
G #8 Black Screws (4)
H Caulking Lip
CAUTION: BE SURE POWER IS OFF AT THE MAIN BREAKER BOX
PRIOR TO INSTALLATION.
1. Carefully unpack the xture from the carton.
2. Using two machine screws (E) (not provided) fasten the wall
mount bracket (D) to the electric box.
Note: A new electric box comes with screws. When replacing an
existing xture, retain screws for use with the new xture.
3. Hold the xture assembly (F) close to the wall mount bracket
and using suitable wire connectors (not provided), connect
xture wires to supply wires (white to white and black to
black). Ground the mounting bracket using the green ground
screw (C) and cupped washer (B) to secure a pigtail lead to
the bracket and connect all ground wires (bare copper or
green to bare copper or green).
CAUTION: MAKE SURE WIRE CONNECTORS ARE TWISTED ON
SECURELY, AND NO BARE WIRES ARE EXPOSED.
4. Apply a generous bead of a suitable caulking material (not
provided) to caulking lip (H) on the fixture. Caulk should be
applied around the entire perimeter of the back (Figure 2).
B337
Cavo Outdoor Sconce Small 303082 Page 1 of 2
CAUTION: FAILURE TO INSTALL THIS FIXTURE PROPERLY MAY RESULT IN SERIOUS PERSONAL INJURY OR DEATH AND
PROPERTY DAMAGE. We recommend installation by a licensed electrician. This product must be installed in accordance with
applicable installation code(s), by a person familiar with the construction and operation of the product and the hazards involved.*
Caution: Do not exceed maximum wattage noted on xture. Use only recommended bulbs with xture.
(Continued)
Please Note: This fixture is designed to be mounted on a standard wall surface and may not be suitable for all applications. Sconces are to be mounted
4 feet above ground. If installing in a non-wood frame application, we recommend consulting a qualified builder or electrician.
(Figure 1)
A
(Figure 2)
A
F
C
B
D
E
G
CAULK
CAULK
CAULK
CAULK

HUBBARDTONFORGE.COM
-, -   
154 RT. 30 SOUTH • CASTLETON, VERMONT 05735
32467
Installation Instructions
If you need further assistance, or nd that you are missing any parts, please contact the dealer from which you purchased this
product. We hope you enjoy your xture!
* Hubbardton Forge will not be liable for injury or damage caused by improper installation, lamping or use of this xture.
B337
Cavo Outdoor Sconce Small 303082 Page 2 of 2
To Mount Fixture to Wall (Continued)
5. Carefully tuck all wires behind the fixture assembly (F) and
inside the wall mount bracket (D). Place the fixture
assembly (F) firmly onto wall mount bracket
(D) and fasten with two #8 black screws (G)
and rubber washers (A) on top.
6. Install the two remaining black screws (G) in bottom of fix
ture attaching to wall mounting bracket (D).
To Install Glass (Figure 3)
Component Parts
F Fixture Assembly
I Glass
J Plastic Retaining Ring
K Metal Trim Ring
L Bulb (Not Included)
M Socket
1. Plastic Retaining Ring (J) and Metal Trim Ring (K) are
shipped installed on socket (M). Unscrew Plastic Retaining
Ring (J) and Metal Trim Ring (K).
2. Press to snap Plastic Ring (J) into Metal Trim Ring (K)
3. Install glass (I) gently over socket (M).
4. Thread Retaining Ring/Trim Ring (J,K) onto socket (M) to
hold glass (I) in place. Do not over-tighten.
5. Install bulb (L) into socket (M).
6. Restore electricity at main breaker. (Figure 3)
I
F
M
J
K
L