Huffy Single Electronic Basketball System User manual

106/04 P/N 211511
© COPYRIGHT 2004 by HUFFY SPORTS
Toll-Free Customer Service Number for U.S: 1-800-558-5234,
For Canada: 1-800-284-8339,
For Europe: 00 800 555 85234 (Sweden: 009 555 85234),
For Australia: 1-800-333 061
Internet Address: http://www.huffysports.com
Dual Electronic Basketball System
Owners Manual
Customer Service Center
• N53 W24700 South Corporate Circle • Sussex, WI 53089 • U.S.A.
TOOLS SUPPLIED: TOOLS NEEDED:
• 1 Allen Wrenches
• Wrench
(4 mm & 6 mm)
• 2 People
SHARP OBJECT
Inflation needle
Keep out of reach of small children.
Not for children under 3 years.
CHOKING HAZARD
Small parts: inflation needle and small
hardware.
Not for children under 3 years.
Keep bags away from babies
and children. Do not use in cribs,
beds, carriages or playpens.
The thin film may cling to nose
and mouth and prevent breathing.
WARNING!
READ AND UNDERSTAND
OPERATOR'S MANUAL BEFORE USING
THIS UNIT.
FAILURE TO FOLLOW OPERATING
INSTRUCTIONS COULD RESULT IN
INJURY OR DAMAGE TO PROPERTY.
ADULT ASSEMBLY REQUIRED
Complete assembly before use by children.
Unpacked product and parts must be kept
away from children. Discard all packaging
material and extra parts after assembly.
ELECTRICALLY OPERATED PRODUCT
As with all electric products, precautions
should be taken to prevent electric shock.
Not recommended for children under 6
years of age.
WARNING!


2
P/N 211511 06/04
Get to know the basic parts of your basketball system.....
IMPORTANT!
Remove all contents from boxes.
We appreciate your purchasing one of our many fine products. We are sure that you will be very satisfied with
your selection. Although great care and effort have been taken, occasionally problems may occur. To ensure
prompt and correct handling of any problems, or to answer any questions, please contact our Toll-Free Customer
Service Number listed on front page. Service will be quicker if you have your Model Number (found on carton)
and assembly instructions ready when calling.
SUPPORT
POLES
BACKBOARD
BALL RAMP
RIMS

06/04 P/N 211511
3
Item Qty Part # Description
1 1 203980 Left Net Hanger Tube
2 1 213980 Right Net Hanger Tube
3 1 203981 Right Vertical Board Mounting Support Tube
4 1 213981 Left Vertical Board Mounting Support Tube
5 2 203982 Vertical Support Tube
6 2 203985 Angle Top Frame Support Tube
7 2 203986 Angle Bottom Frame Support Tube
8 2 203987 Middle Telescoping Ramp Support Square Tube
9 1 203983 Right Horizontal Frame Brace, Square
10 1 203984 Left Horizontal Frame Brace, Square
11 2 203988 Front Telescoping Ramp Support Square Tube
12 1 203989 Front Horizontal Ramp Support Square Tube
13 1 203990 Horizontal Frame Cross Brace
14 2 203992 Plastic Tube Cap
15 1 219012 Backboard
16 2 203993 Rim Support Plate, Metal
17 2 203994 Rim Assembly
18 2 203997 Rim Lock Pin
19 1 203998 Electronic Score Keeper
20 2 203999 Switch and Paddle Assembly
21 1 204000 Ball Ramp with Side Netting
22 10 204001 Socket Head Screw, M6 x 35 mm Long.
23 32 204002 Locknut, M6
24 2 204003 Socket Head Screw, M6 x 30 mm Long.
25 16 204004 Socket Head Screw, M6 x 20 mm Long.
26 4 204005 Socket Head Screw, M6 x 45 mm Long.
27 4 204006 Socket Head Screw, M5 x 20 mm Long.
28 4 204007 Locknut, M5
29 4 204009 Plastic Leg End Cap
30 2 204010 Metal "J" Hook
31 1 204016 Wrench, Allen, 4mm
32 4 204018 Washer, Flat, 5mm
33 1 204017 Wrench, Double Ended, M6 & M5
34 6 204011 Basketball, Size #3, 7.0" Dia.
35 2 204012 Net , Nylon
36 1 204013 Inflation Pump with Needle
37 1 204014 AC Power Adapter, 6 Volt
PARTS LIST - See Hardware Identifier
HARDWARE IDENTIFIER
Item #22 (10) Item #24 (2)Item #23 (32)
Item #25 (16) Item #26 (4) Item #27 (4) Item #28 (4)

4
P/N 211511 06/04
Assemble back frame with bolts (22), nuts (23), and by snapping pins into tubes as shown.
1.
9
10
2
1
3
5
6
6
4
5
7
7
29
29
29
29
22
23
22

06/04 P/N 211511
5
Attach rims (17) to backboard (15)
with bolts (25), back plates (16),
and nuts (23) as shown.
Repeat for opposite side.
Attach score keeper (19) to backboard with
bolts (27), washers (32), and nuts (28).
2. 3.
23 15
17
25
19
27
16
32
28
4.
17
25
25
23
Paddles must be
centered underneath rim
for proper registration of
score.
NOTE:
20
Attach scoring paddles (20) onto
backboard below rims (17) with
bolts (25) and nuts (23). Plug
wires from paddles into scoring
unit as shown.

6
P/N 211511 06/04
Attach backboard assembly to back frame with bolts (26), J-hooks (30), and nuts (23).
6.
26
30
26
Attach nets (35) to rims (17).
5.
12
34
17
OUTSIDE VIEW
35
DO NOT ENTANGLE WIRES FROM PADDLE IN NET
23
23
26
30

06/04 P/N 211511
7
Slide ball ramp (21) onto back frame as shown.
7.
21
Assemble frame tubes (8 and 11). Install tube caps (14) as shown.
8.
11
11 8
8
14
14

8
P/N 211511 06/04
Insert ramp support tube (12) into end loop of ball ramp (21). Pass tube through elastic loop of
ball ramp and insert into frame tube (11)
9.
Secure 2nd strap to ramp support tube (12) as
shown.
10.
12
21
11
END LOOP OF BALL RAMP
12
12

06/04 P/N 211511
9
Attach frame cross brace (13) to
ramp support tube (12) with
bolts (24) and nuts (23) to add
tension to ball ramp.
11.
23
24
23
24
Hook elastic strap over J-hooks (30) and snap secondary straps together
around tubes as shown. Plug paddle connector into scorekeeper (19).
12.
13
12
30 30
19
19

10
P/N 211511 06/04
Operation.
13. BACK VIEW OF SCORING UNIT
ON/OFF
AC
ADAPTER
PADDLE CONNECTIONS
AC POWER: REMOVE AC ADAPTER FROM BOX. INSERT AC PLUG INTO SLOT ON SCORING UNIT. INSERT AC
ADAPTER INTO 110 VOLT WALL OUTLET. TURN SCORING UNIT “ON”.
Electronic Game Scoring
1. As a player steps up and sinks a basket, a musical tune will play to signal
the start of a game. After the tune stops and a beep is heard, a 00 display
will show.
2. The score keeper will reset the display to 60 seconds and begin counting
baskets.
3. A beep is made for every basket made.
4. Two (2) points per basket made for first 45 seconds of game play.
5. After 45 seconds, a musical tone will play, signaling the start of 3 points per
basket.
6. As time displays 00, a buzzer will sound. The high score is retained in
memory.
7. The high score will be retained in memory unless power is disconnected.
8. As the game is finished a 6 second delay will clear both scores and reset.
9. The highest score made is displayed and retained in memory. The high
score resets to 00 if game is not played after 30 minutes.

06/04 P/N 211511
11
Telescoping Unit To/From Storage Position:
A. Depress all four locking pins in telescoping tubes (8 and 11).
B. While holding front section of frame, gently slide frame towards backboard (15).
C. To return unit to playing position, slide front section of frame away from backboard (15)
until all four pins lock frame into position. .
14.
A.
B.
C.
15
8
11