HULALA HOME DKHN0066-1 User manual

NOTE:
This brochure contains IMPORTANT safty info. Please read
and keep for future reference.
ITEM NO. DKHN0066-1

WARRANTY
We strive to offer high-quality products, and we also try our
best to satisfy each and every customer that orders from us with
product or service as needed. We provide 30 days warranty
starting from the time you receive the item. Each customer must
provide a record of their order such as the order number, or
item receipt for any items that are out of the warranty period
you may also still receive replacement parts by purchasing them
with our company if they are available.
Are you having difficulty
with assembly? Missing parts?
Please send email with your order No
[email protected]
For return, Please check the return policy with
the retailer or MarketPlace you bought from.
Appreciated your purchasing from us.
Pop up your life by our furniture piece!

MAINTAINANCE
AND WARNING
Keep furniture away from heat.
Do not clean furniture with harsh cleansers or
pol ish. Do not use detergents, Solvents,
abrasives, spray packs or leather cleaner. Use
non-color mild soap with warm water clean
spills(Mix 1:10 soap to water)
Do not place furniture under direct sunlight,
material will possibly fade over time.
Do not use on site dry Cleaning machine.
Children should not climb or jump on the
furniture.
Do not write on furniture without a padded
barrier to protect the surface.
Not for commercial use, For residential use
only.
Weight Limitation
275LBS
LB

PARTS
LIST
1
2
3
3
4
7
6
8
10
9
12
11
13
x3
14
14
14
16
15
17
18
18
18
19
19
19
20
21
21
21
20
20
22
Front bottom
Check all parts according to parts and hardware list make sure all parts present before assembly
as some small parts may come loose during transit. Place all parts on clean padded surface and
line up according to sequence of assembly.

HARDWARE
LIST
A
SPARE
EXTRA PARTS
12pcs
1/4*38
4mm M6x35
M6x15
1pc 6pcs 3pcs 3pcs
BCD E
A
M6x15
1pc 1pc
M6x35
C
F
∅15*12
∅7*36 ∅8*30 ∅3.5*14 M6*25
46pcs
46pcs 8pcs 24pcs 12pcs 6pcs
G
M
H I JK L
6pcs
16"
3pcs
∅4*40
F
∅15*12 ∅7*36 ∅8*30 ∅3.5*14
GH I
1pc 1pc 1pc 3pcs
J
∅4*40 M6*25
L M
1pc 1pc 1pc
Be sure to check all packing material carefully for small parts,
which may have come loose inside the carton during shipment.

ASSEMBLY
INSTRUCTIONS
STEP 1:
open and place all parts on a clean, no-marring surface.
Ax12
AB
1
2
3
3
4
Use bolt A and allen Key B to connect stretchers 3 and 4 with side
frames 1&2. Make sure all parts sets leveled then fasten all bolts to
secure.

ASSEMBLY
INSTRUCTIONS
STEP 2:
Ix24
Kx3
11
12
6
7
KI
Use wood screw I and philips head screw driver to attach drawer slides K to end panel and partition 11&12&6&7.

ASSEMBLY
INSTRUCTIONS
STEP 3:
Fx2
Gx2
Jx12
67
8
9
10
J
48 33
Front
Turn the center partition 6&7 upside down,use philips head screw driver to
fasten bolt F on inserts of back panel 8, bottom panel 9&10, then insert the
bolts G on back panel 8 through end holes of center partition 6&7, put on
cam unit F and fasten to secure. Use philips head screw driver and wood
screw J to attach bottom panel 9&10 to bottom edge of center partition 6&7.
8
G
F

11
12
Fx10
Gx10
ASSEMBLY
INSTRUCTIONS
STEP 4:
Use philips head screw driver to fasten bolt G on inserts of end panel 11 & 12, back panel 8, then insert the
bolts G on end panel 11 & 12 through end holes of bottom panel 9 & 10, put on cam unit F and fasten to
secure.
G
12
11
F
9
10

Fx16
Gx16
Hx8
13
ASSEMBLY
INSTRUCTIONS
STEP 5:
Use philips head screw driver to fasten bolt G on inserts of table top 13, Insert all dowels H to holes on
back side of table top 13 then insert the bolts G on table top 13 through end holes of end/back/bottom
panels assembly (6&7&8&9&10&11&12), put on cam unit F and fasten to secure.
G
F
H
13

C
ASSEMBLY
INSTRUCTIONS
STEP 6:
Cx6
Use philips head screw driver and bolt C to attach the metal frame assembly to bottom of upper unit,
make sure all edges align then fasten to secure.

16
15
17
ASSEMBLY
INSTRUCTIONS
STEP 8:
Pull out the drawer slides and carefully align the pin on drawer slides with the hole on drawer box then fix
the clip to secure the drawer. Whenever drawer adjustment of drawers needed, please spin the pin on
drawer slides to set it level.

M
Mx6
ASSEMBLY
INSTRUCTIONS
STEP 9:
Switch the button with hand to slightly adjust the height of drawer sides in order to sent the drawer leveled. Insert the
plastic clip M through the slide to the hole on drawer sides.

ASSEMBLY
INSTRUCTIONS
Assembly completed.