HULALA HOME SFYB0365 User manual

NOTE:
ITEM NO. SFYB0365
This brochure contains IMPORTANT safty info. Please read
and keep for future reference.
WARRANTY
We strive to offer high-quality products, and we also try our
best to satisfy each and every customer that orders from us with
product or service as needed. We provide 30 days warranty
starting from the time you receive the item. Each customer must
provide a record of their order such as the order number, or
item receipt for any items that are out of the warranty period
you may also still receive replacement parts by purchasing them
with our company if they are available.
Are you having difficulty
with assembly? Missing parts?
Please send email with your order No
customerser[email protected]om
For return, Please check the return policy with
the retailer or MarketPlace you bought from.
Appreciated your purchasing from us.
Pop up your life by our furniture piece!

MAINTAINANCE
AND WARNING
Keep furniture away from heat.
Do not clean furniture with harsh cleansers or
polish. Do not use detergents, Solvents,
abrasives, spray packs or leather cleaner. Use
non-color mild soap with warm water clean
spills(Mix 1:10 soap to water)
Do not place furniture under direct sunlight,
material will possibly fade over time.
Do not use on site dry Cleaning machine.
Children should not climb or jump on the
furniture.
Do not write on furniture without a padded
barrier to protect the surface.
To obtain the longest lifespan of your outdoor
products, avoid exposure to rain or snow, and
direct sunshine for long time. Whenever
possible cover the product and/or place under
patio or awnings.
Not for commercial use, For residential use
only.
Weight Limitation Estimated Duration Of Assembly
220LBS 10-15 MINUTES
PARTS
LIST
● Read instructions, cover to cover.
● Have 2 adults on hand for assembly.
● Do not assemble on flooring or carpet.
● Assemble on a clean non-marring surface
（packing foam).
● Save all packaging until finished.

HARDWARE
LIST
ASSEMBLY
INSTRUCTIONS
SPARE
Be sure to check all packing material carefully for
small parts, which may have come loose inside the
carton during shipment.
STEP 1:As shown in the picture above.
Attach the wood end of Left Armrest (C) and
R i g h t A r m r e s t ( D ) t o t h e b o t t o m o f
Seat(B).using Bolts(F) 、Spring Washers(G)
and Washers(H) with the Allen Wrench( I ).
but please don’t fasten it until all bolts
connected correctly.

STEP 2: Insert back(A) into the rear ends of
the armres t s , as s h o wn i n t he p i ct u re
above.Using Bolts(E) and Spring Washers(G)
with the Allen Wrench( I ). but please don’t
fasten it until all bolts connected correctly.
STEP 3: As shown in the picture above.Using
Bolts(E) and Spring Washers(G) with the Allen
Wrench( I ). but please don’t fasten it until
all bolts connected correctly.

STEP 4: As shown in the picture above. Using
Bolts(F) 、Spring Washers(G) and Washers(H)
with the Allen Wrench( I ). but please don’t
fasten it until all bolts connected correctly.
STEP5： Stand the Chair up.
Place the Chair on a LEVEL SURFACE.
Insp e ct it and make sure all par t s a re
adequately connected.
Gently and carefully, sit on the Chair.
This will help to align all parts at all joints.
Then get off the Chair, and carefully place the
Chair facedown.
Then proceed to tighten all Bolts at all joints
in a sequential manner.
If there are any wobbles after tightening,
loosen the Bolts and execute the same
process .