Hwasung HP-500 User manual

Technical Manual
(Model : HP-500)

CAUTION
•Please do not disassemble / reorganize the product.
•Please do not the remove the paper jam during power on.
•Pleased do not exceed the standard power voltage.
•Please do not wash off the product.
•Please do not press / shock the product.
•Please do not put the product at the moist (humid) condition.
•Please contact us if there is any problem.
•Please power off once remove the paper jam.
•Please clear the air / open the disclosed place.
•Please set the product without damage enviornment.
•Please set the product at the stable place.
•Pleaes keep the requires as necessary as general electrics.
Title Rev. Page
HP-500 Ver 1 Ver1.0 P.1

목차
1. Printer features & External dimension 3
1-1) Name of each parts 3
1-2) Operation Part 4
2. Operation 5
2-1) Replacing the roll of paper 5
2-2) Self test 6
2-3) Communicatino Setting up 7
2-4) HEX Dump 8
2-5) Update 9
2-6) Memory switch 10
2-7) Way of connecting WiFi or Bluetoorh 13
(RF Interface)
3. Genearl Specification 13
3-1) Specification 13
3-2) Font 13
3-3) Inner Buffer 13
3-4) Electronical Spec 13
3-5) Operation condition 13
3-6) MCBF 13
4. Interface Specification 14
4-1)RS-232C 14
4-2)USB 14
4-3)WiFi 14
4-4)BlueTooth 14
5. Command 15
6.Windows Driver 40
6-1) Set up the function 40
6-2) Set up the paper 41
6-3) Set up the new paper 42
7. USB User Interface 44
7-1)
functions 44
7-2) Caution for using USB Interface 46
Title Rev. Page
HP-500 Ver 1 Ver1.0 P.2

1. Printer features & External Dimension
1-1) Name of each parts
1. Button and LED
2. Open Lever
3. Maual Cutter
4. Battery
5. DC Connect
6. USB/RS232C Interface
1
2
3
4
5
6
Title Rev. Page
HP-500 Ver 1 Ver1.0 P.3

1-2) Operation Parts
* Battary State
3 light is “ Full “ charged.
2 light is “ Middle “ Charged
1 light is “ Low “ it needed to be charged.
If the light in Error LED is “ Very Low “ in a battary
* Power
Power on : Please press the button for 1 sec more.
Power off : Please press the button for 1 sec more.
* FEED
Paper feeding .
* Error
If there is something worng, it will be light as Red when there is no paper or out of bettary
* WiFi and Bluetooth
When operating WiFi or BlueTooth, the LED indicator will be lighting.
* Setting the Lable.
You can use the label paper after setting label option.
①Power on the printer
②Open the paper cover and Press the FEED button for 2 seconds.
③When Melody is alaming, Put the paper of label in the printer and close the paper cover.
When it comes back to Receipt Option, Please follow this step again.
Battery
WiFi BlueTooth
Error
Power
FEED
Title Rev. Page
HP-500 Ver 1 Ver1.0 P.4

2. Operation
2-1) Replacing the roll of paper.
The paper setting up is as below.
Lever
②
Please insert the paper, till the paper comes out from
the cover.
①
Open the cover in Mobile Printer by Lever
③
Close the cover and cut the extra paper.
Title Rev. Page
HP-500 Ver 1 Ver1.0 P.5

2-2 ) Selftest
Please turn off and on the power, while you press down the feed button.
And you can see the Error Led light kept then the following informations are being feeded.
Model.
Firmware version / creare date.
Printer information.
Serial I/F information
WiFi information
******************************
HP-500 Control Board
Firmware :: Ver0 .45
Create : 20XX/XX/XX
******************************
Printer Information
Battery Volt : 7.7(V)
Hex Dump Mode : OFF
Print Density : Normal
Melody Sound : ON
Paper Type : Receipt
Wireless Type : WiFi / BlueTooth
Power off time : 10 Minute
Tear Bar : 5 Pitch
Serial I/F Information
Baud Rate : 9600
Date Bit : 8 bit
Partiy : None
Stop Bit : 1 or 2
Flow Control : RTS-CTS(DTR-DSR)
WiFi Information
WiFi Mode : AP Mode
IP Address : 192.168.012.101
Gateway : 192.168.012.001
SSID : HWASUNG_4E:8E:EE
SECURITY KEY : 12345678
Title Rev. Page
HP-500 Ver 1 Ver1.0 P.6

2-3 ) Communication setting
Set the printer function and communication condition between host by memory switch utility
program.
※Note : Setting ereases all contents in memory switch, so code page and print optionshall be set
again.
1 ) Manual setting
Turn on the printer at initial setting mode.
※Method to go initial setting mode
[ Press and hold FEED button and then turn on power pressing 2 or more seconds, then PE LED and
ERROR LED blinks by turns and it is switched to initial setting mode (9600 BPS, PARITY NONE,
HARDWARE HANDSHAKE).]
In manual setting, considering of communication condition is not required.
2 ) After switched to initial setting mode, followings will be printed.
.
[Menu]
1.Print Density
2.Melody Sound
3.Paper Type
4.Hex Dump Mode
5.Wireless Type
6.WiFi Mode
7.IP Mode
Select and then Enter...
Enter : Press the feed button once for
more than 1second.
Select: Press the feed button many times
less than 1second as menu number.
Exit : Turn power off then on.
Pressing FEED button for more than 1second, it is fixed(press enter), and less than 1 second, item
is selected.
For example, if you want to change the Wifi Mode of #6 menu, press #6 less than 1 second, and
press more than 1 second. To exit, turn off the power and turn on again.
3) Successively, select from printed items and confirm.
Ex) [Wireless Type]
1.WiFi
-> 2.Bluetooth
-> : Indicate current set status
Select and then Enter...
Ex) In here, arrow((->) indicates current settings. To change, select item and enter. TO move to
Title Rev. Page
HP-500 Ver 1 Ver1.0 P.7

next menu with no change, just enter without selecting item.
4) Successively, you will know the change result from the printed items.
“ It was changed successfully!”
This message means change was successful.
“ The value is invalid, try again!”
This message is shown when selected item is invalid or when you move to other menu without item
change.
5) Setting result can be confirmed by printing test page or by the location of arrow(->) after selecting
menu item in initial setting mode.
2-4) HEX Dump
Setting up “Hex Dump Mode in Setting Mode. Then it prints all data in hex character
(16 antilogarithm).
You can see the status of receipt. . It will be useful for the appilcation you do.
It prints the data, once it receives the data 12 digit.
You can print the data less than 12 digit, when you press down the button of feed
The control code ( 1F16 below) prints “.”.
The 8016 above prints “^”.
[Printing sample]
16 antilogarithm ASCII
[HEX DUMP MODE]
41 42 43 44 45 46 47 47 49 A B C D E F G H I
30 31 32 33 34 35 36 37 38 0 1 2 3 4 5 6 7 8
FF 1B 69 ^ . i
Title Rev. Page
HP-500 Ver 1 Ver1.0 P.8

2-5) Onboard update
Please conduct the updates, after refering the following steps.
1) Please switch off and on
2) Please check the connection between the printer and the data cable.
* Please make sure about if it is the right cable.
* If use USB cable, save the time to update the firmware
3) Please conduct the provided program , then set up the model and Interface port
If the error LED is turned off and is lighted on slightly after 4 seconds,
then the updated is being started.
* Please do not switch off the printer power, till the update is complete.
4) The update will be complete, once the update indicates complete.
* If the error LED keeps the light goes in and out, it’s error.
Please stop the update program and make sure the cable and other connections.
Please return the process “1.” and follow the step again.
5) Atfer update, automatically the printer will be reset for using and use the printer.
Title Rev. Page
HP-500 Ver 1 Ver1.0 P.9

2-6) Memory switch
Please set the function of internal memory.
※Please use the provided program - ‘memory swtich setting utility program’.
※The value is not deleted until the next value is changed, even though power off.
Memory SW
Setting Value
Descreption
SW1
Reservation
SW2
0~1200 or 0~136
SW3
248-4000
SW4
Base Code Page
Setting one
default
value for each country
SW5
Base Font
Setting one of
1) 2byte codes : korean(24 x 24), korean(16 x 16),
Japenes(24x24), Chinese(24x24).
2).1byte codes : ASCII(12x24),
ASCII(8x16,9x16)
SW6
Reservation
SW7
Reservation
SW8
Reservation
Code Page Manu
Font Manu
After setting, Press the button
Setting
paper
Title Rev. Page
HP-500 Ver 1 Ver1.0 P.10

[Memory Switch information]
================================
Code Page = PC437(U.S)
2Byte Font = Korean(24x24)
1Byte Font = ASCII(12x24)
Mem1:FFh
Mem2:FFh,FFh
Mem3:FFh,FFh
Mem4:00h
Mem5:00h
Mem6:FFh
Mem7:FFh
Mem8:FFh
Mem9:FFh
Mem10:FFh
Mem11:40h
Mem12:F9h
(Ex) Sample of printing by selftest
Title Rev. Page
HP-500 Ver 1 Ver1.0 P.11

2-7) The way to connect the RF interface.
1) BlueTooth
BlueTooth inteferface can be set up by simple control
①Please refer to 2-3P and set up from Wireless moder to Bluetooth
②When the Error LED is not lighting, Pressing power button and FEED button togather for
1second then take off.
③And searching for Bluetooth device in Mobile Phone or PC
④When finding “HWASUNG_XX:XX:XX” on PC or Smart Phone and choosing it and it will be
pairing automatically.
⑤the pairing is complete ordinarily, the light in LED bluetooth will be stopped.
2) WiFi
There are two of modes
Station Mode : Printer will be connected with Wireless directely.(SSID and others Setting necessary)
AP Mode : Printer will be connected with other devices(Not setting necessary)
①Please refer to 2-3 and Set up “ Wireless Mode “
②Please refer to 2-3 and Set up “ Station Mode “ or “ AP Mode “ according to where you use.
When choose the mode is “AP Mode “
③Turn on the printer and atfer 3 second automatically IP Address and SSID and Password will be
printed.
④And please connect with PC or Smart Phone then put in the SSID and Password.
⑤When the connection is complete, using IP address printed.
Title Rev. Page
HP-500 Ver 1 Ver1.0 P.12

3. General Specification
3-1) Specification
1) Printing : Direct thermal printer
2) Resolution and Dot : 203dpi, 1dot=0.125mm, 8dot/mm, Total 384 dot
3) Printing speed (Max) : 90mm/sec(Max)
4) Printing Width : 48mm
5) Paper Width : 58mm
6) Paper Diameter : 40 Diameter (Max)
7) Character (MAX) a line : 32fonts (ASCII 12 x 24),16fonts (Korean 24 x 24)
3-2) Font
1) English / Number FONT A(8 x 24) 95, FONT B(8 x 16) 95
2) Graphic FONT A(8 x 24) 128, FONT B(8 x 20) 95
3) International 14types 37fonts
(Korean,English,France,Germany,England,Denmark1,Swden,Italy,
Spain1,Japan,Norway,Denmark2,Spain2,Latin America)
4) Korean FONT AGothic (24 x 24), FONT B Gothic (16 x 16,option)
3-3) Internal Buffer
Receiver buffer : 4KByte
3-4) Electrical Spec
1) Operating Voltage
Insert Voltage
7.4V Li-ion Battery
Operation voltage
5V
Motor,Thermal print head
Logic voltage
5V±5%
Logic circuit
2) Consumption current
Average : 1.5A(Printing percentage 12.5%))
Peak : 3.7A
3-5) Operation condition (temperature / Humid)
1) Temperature : 0∼40℃
2) Humidity : 40∼90%RH(in not dew condensation)
Notice : The printing is subjet to the operation condition.
3-6) MCBF
1) Mechanism : 15,000,000 Lines.
2) Thermal Print Head 50Km, 1 pulse.
Title Rev. Page
HP-500 Ver 1 Ver1.0 P.13

4. Interface specification
4-1) RS-232C
1) Data Transmission : Serial
2) Hand shake : Hardware (RTS/CTS or DTR/DSR )
3) Baud Rate : 9600, 19200, 38400, 57600 BPS
4) Data Bit : 8bit
5) Parity : None, Odd, Even
6) Stop Bit : 1 or 1.5 or 2 bit
7) Connector : 10 pin Mini-B(Dedicated Cable)
Printer
Pin
Signal
In/Out
1
TxD
Out
2
RxD
In
3
DTR/RTS
In
4
GND
-
(Dotted line) : Connect to host.
4-2) USB
1) Standard : USB 2.0 Compatibility, Full Speed(12Mb)
2) Connector : Type MINI-B
3) Cable : USB2.0 Standard Cable
4) Data : Bulk IN, Bulk OUT
Bulk IN : End point 6
Bulk OUT : End point 2
Full Speed : Max Packet Size 64 Byte(Bulk OUT),64 Byte(Bulk IN)
4-3) WiFi
1) Standard : IEEE 802.11b/g/n,
2) Frequency : 2.400 GHz ~ 2.484 GHz
3) Channel : CH1 ~ CH11
4) Security : WEP, WPA/WPA2PSK
4-4) BlueTooth
1) Standard : Bluetooth 3.0 Class2
Host
Pin
Signal
In/Out
2 RxD
In
3 TxD
Out
8 CTS
In
5 GND -
6 DSR
In
Title Rev. Page
HP-500 Ver 1 Ver1.0 P.14

5.Commend
Command
Function
PAGE
CR
Print and carriage return
17
LF
Print and line feed
17
CAN
Cancel the print data
17
HT
Horizontal tab
17
FF
Print the page mode / return to the standard mode
17
SUB x
Extended graphic mode
18
SUB p
Print the off line a paper detection
18
SUB R
Outline Character (Tetragon)
18
SUB B
2D barcode
18
SUB 1
Line 1 (Vertical, Horizontal)
19
SUB 2
Line 2 (Vertical, Horiztontal)
19
SUB W
Write (line data)
19
SUB C
Clear (line data)
19
SUB O
Line ON
20
SUB F
Line OFF
20
SUB P
Print line 1 dot line (Vertical, Horizontal)
20
ESC D
Horizontal tab position
20
ESC SP
Spacing the character of ASCII
20
ESC !
Font decoration
21
ESC $
Absolute position of printing
21
ESC *
Bit image (vertical)
21
ESC -
Underline the character of ASCII
23
ESC 2
Initial row pitch
23
ESC 3
Row pitch
24
ESC @
Printer reset
24
ESC E
Emphasize
24
ESC G
Double
24
ESC J
FEED
24
ESC j
BACK FEED
24
ESC M
Font (ASCII)
25
ESC R
International character
25
ESC a
Align the printing
26
ESC d
Printing and row FEED
26
ESC {
180° rotation
26
ESC t
Code page (International)
26
ESC S
Standard mode / Clear the area of page
27
ESC L
Page mode
27
ESC FF
Printing of page area
27
Title Rev. Page
HP-500 Ver 1 Ver1.0 P.15

Command
Function
PAGE
ESC T
Page mode (Direction of printing)
28
ESC W
Page mode (Area of printing)
29
FS !
Korean font decoration
30
FS &
Korean extended graphic mode (set up)
30
FS .
Korean extended graphic mode (cancel)
30
FS -
Underline Korean
31
FS S
Space Korean
31
FS W
Size Korean
31
FS q
Register Non Volatile logo (bit image)
32
FS p
Non Volatile logo print
32
GS !
Extension of character
33
GS (K (fn=49)
Density of printing
33
GS (K (fn=97)
Operating Thermal Head Partially
34
GS B
Reverse printing in black / white
34
GS H
Barcode
34
GS L
Left space
35
GS W
Area of printing
35
GS h
Barcode (Height)
35
GS k
Barcode (Printing)
35
GS w
Barcode (Extension / Reduction)
36
GS r
Status check
37
GS a
Status check (Auto reply)
37
GS v
Laster bit image (Horizontal)
38
DLE ENQ
Buffer clear (real time)
38
DLE EOT
Status transmission (real time)
39
Title Rev. Page
HP-500 Ver 1 Ver1.0 P.16

CR
[Name] Print and carriage return
[Format] ASCII CR
Hex 0Dh
Decimal 13
[Range] -
[Descript] equal LF
LF
[Name] Print and line feed
[Format] ASCII LF
Hex 0Ah
Decimal 10
[Range] -
[Descript] ①STANDARD MODE:
After printing the data and go to return according as the fixed data.
②PAGE MODE:
The fixed data can be only conduted, according as the fixed data.
[Caution] The LF is ignored behind of CR
CAN
[Name] Cancel print data in page mode
[Format] ASCII CAN
Hex 18h
Decimal 24
[Range] -
[Dsecirpt] The data is deleted within the area of printing.
HT
[Name] Horizontal tab
[Format] ASCII HT
Hex 09h
Decimal 9
[Range] -
[Descript] Moves the print position to the next tab poisition
[Caution] Horizontal tab position are to set in ESC+’D’+n.
FF
[Name] Print and return to standard mode in page mode
[Format] ASCII FF
Hex 0Ch
Decimal 12
[Range] -
[Descript] Print the data in the print buffer and returns to standard mode
[Caution] Use the command ESC+FF , in order not to return the standard mode.
The data is not deleted in the area of page.
Title Rev. Page
HP-500 Ver 1 Ver1.0 P.17

SUB+’x’+n
[Name] Extension Graphic Mode, Korean Mode
[Format] ASCII SUB x n
Hex 1A 78h n
Decimal 26 120 n
[Range] 0≤n≤1
[Initial Value] n=0
[Descript] n=0 : Korean Mode, First code is A1h more, automatically transfer Korean
in 2 bytes
n=1 : Extension Graphic Mode, Every code is setting in 1 byte
Extension Graphic font will be printed
SUB+’p’+n
[Name] Off line printing in paper detection
[Format] ASCII SUB p n
Hex 1A 70h n
Decimal26 112 n
[Range] 0≤n≤1
[Initial Value] n=1
[Descript] n=0 : Not transition to offline once paper empty (data communication available)
n=1 : Transition to offline once paper empty (data communication not avaiable)
SUB+’R’+n
[Name] Set the character outline
[Format] ASCII SUB b n
Hex 1A 52h n
Decimal 26 82 n
[Range] 0≤n≤1
[Descript] n=0 : cancel character outline (tetragon)
n=1 : Set character outline (tetragon).
[Caution]The horizontal extension is valid as eight times.
The vertical extension is valid as two times
SUB+’B’+n1+n2+n3+d1……dk
[Name] 2D Barcode.
[Format] ASCII SUB B n1 n2 n3 d1…………dk
Hex 1A 42h n1 n2 n3 d1…………dk
Decimal 26 66 n1 n2 n3 d1…………dk
[Range] Please refer the table below.
[Descript] Please choose the barcode by the data of barcode.
n1 : two dimension of barcode
n2 : the number of data of barcode
n3 : size of barcode
d1… dk : the data of barccode
n1
Barcode
1
PDF417
2
QR code
Title Rev. Page
HP-500 Ver 1 Ver1.0 P.18

1) PDF417 2) QR code
SUB+’1’
[Name] Line 1 (Vertical, Horizontal)
[Format] ASCII SUB 1
Hex 1A 31h
Decimal 26 49
[Description] Line of Vertical Horizontal.
SUB+’2’
[Name] Line 2 (Vertical,Horizontal)
[Format] ASCII SUB 1
Hex 1A 32h
Decimal 26 50
[Description] Line of Vertical Horizontal
SUB+’W’+nL+nH+kL+kH
[Name] Write (line data)
[Format] ASCII SUB W nL nH kL kH
Hex 1A 57h nL nH kL kH
Decimal 26 87 nL nH kL kH
[Range] 0≤nL+(nH×256)≤512、(0≤nL≤255, 0≤nH≤3)
0≤kL+(kH×256)≤512、(0≤kL≤255, 0≤kH≤3)
[Description] It writes 1 from nL+nH×256 to kL+kH×256.
[Caution] It is not deleted, till you power off, or you clear the command.
SUB+’C’
[Name] Clear (line data)
[Format] ASCII SUB C
Hex 1A 43h
Decimal 26 67
[Description] It clears all of line zero (0).
[Caution] Please use this command to write the line again.
Please use the command line ON/ line OFF to write line 1 to speed up the progress.
n2
Number of data
1 < n2 ≤ 255
n3
Size of data
3
Horizontal 3
4
Horizontal 4
5
Horizontal 5
6
Horizontal 6
7
Horizontal 7
8
Horizontal 8
9
Horizontal 9
※Vertical is set a utom a tically.
n2
Number of data
n3=1
1 < n2 ≤ 17
n3=3
1 < n2 ≤ 53
n3=5
1 < n2 ≤ 106
n3=9
1 < n2 ≤ 230
n3
Size of data
1
Version 1
3
Version 3
5
Version 5
9
Version 9
Title Rev. Page
HP-500 Ver 1 Ver1.0 P.19