Hycontrol REFLEX RC Series User manual

24 GHz Radar (FMCW) Level Transmitter for solids from
granulates to rocks
REFLEX RC SERIES
REFLEX RC SERIESREFLEX RC SERIES
REFLEX RC SERIES Handbook
HandbookHandbook
Handbook
© HYCONTROL 01/2019 - RC SERIES MANUAL v1

All rights reserved. It is prohibited to reproduce this documentation, or any part thereof, without
the prior written authorisation of HYCONTROL.
Subject to change without notice.
2
www.hycontrol.com 01/2019 - RC SERIES MANUAL v1
Copyright 2019 by HYCONTROL
: IMPRINT ::::::::::::::::::::::::::::::::::

CONTENTS
3
www.hycontrol.com01/2019 - RC SERIES MANUAL v1
REFLEX RC SERIES
1 Safety instructions 7
1.1 Software history ............................................................................................................... 7
1.2 Intended use ..................................................................................................................... 8
1.3 Certification ...................................................................................................................... 8
1.4 Radio approvals ................................................................................................................ 9
1.4.1 European Union (EU)............................................................................................................... 9
1.4.2 U.S.A. and Canada................................................................................................................. 13
1.5 Safety instructions from the manufacturer ................................................................... 16
1.5.1 Copyright and data protection .............................................................................................. 16
1.5.2 Disclaimer ............................................................................................................................. 16
1.5.3 Product liability and warranty .............................................................................................. 17
1.5.4 Information concerning the documentation......................................................................... 17
1.5.5 Warnings and symbols used................................................................................................. 18
1.6 Safety instructions for the operator............................................................................... 18
2 Device description 19
2.1 Scope of delivery............................................................................................................. 19
2.2 Device description .......................................................................................................... 20
2.3 Visual Check ................................................................................................................... 21
2.4 Nameplates .................................................................................................................... 22
2.4.1 Nameplate (examples).......................................................................................................... 22
3 Installation 23
3.1 General notes on installation ......................................................................................... 23
3.2 Storage ........................................................................................................................... 23
3.3 Transport ........................................................................................................................ 24
3.4 Pre-installation requirements ....................................................................................... 24
3.5 Pressure and temperature ranges ................................................................................ 25
3.6 Recommended mounting position ................................................................................. 25
3.6.1 General notes........................................................................................................................ 26
3.6.2 Tanks with dish-shaped and conical bottoms...................................................................... 27
3.7 Mounting restrictions ..................................................................................................... 28
3.7.1 General notes........................................................................................................................ 28
3.7.2 Process connections............................................................................................................. 30
3.8 How to attach antenna extensions ................................................................................. 35
3.9 Orientation system (accessory)...................................................................................... 38
3.9.1 How to attach the orientation system to the device ............................................................. 38
3.9.2 How to tilt the device............................................................................................................. 40
3.10 How to turn or remove the display module (option) .................................................... 41
3.11 Weather protection....................................................................................................... 42
3.11.1 How to attach the weather protection to the device........................................................... 42
3.11.2 How to open the weather protection .................................................................................. 44
4 Electrical connections 45
4.1 Safety instructions.......................................................................................................... 45
4.2 General notes ................................................................................................................. 45

CONTENTS
4
www.hycontrol.com 01/2019 - RC SERIES MANUAL v1
REFLEX RC SERIES
4.3 Electrical installation: output options with cable gland ................................................ 46
4.4 Electrical installation: output options with an M12 male connector............................. 50
4.5 Electrical connection for current output ....................................................................... 50
4.5.1 Non-Ex devices ..................................................................................................................... 50
4.5.2 Devices for hazardous locations........................................................................................... 51
4.6 Ingress protection .......................................................................................................... 51
4.7 Networks ........................................................................................................................ 52
4.7.1 General information.............................................................................................................. 52
4.7.2 Point-to-point connection..................................................................................................... 52
4.7.3 Multi-drop networks ............................................................................................................. 53
5 Start-up 54
5.1 Start-up checklist........................................................................................................... 54
5.2 How to start the device................................................................................................... 54
5.3 Operating concept ..........................................................................................................54
5.4 Digital display screen .....................................................................................................55
5.4.1 Display screen layout............................................................................................................ 55
5.4.2 Keypad buttons ..................................................................................................................... 56
5.5 Remote communication with PACTware™ .................................................................... 58
5.6 Remote communication with the AMS™ Device Manager............................................. 59
6 Operation 60
6.1 User modes .................................................................................................................... 60
6.2 Normal mode.................................................................................................................. 60
6.3 Program mode................................................................................................................ 64
6.3.1 General notes........................................................................................................................ 64
6.3.2 Protection of the device settings (access levels) ................................................................. 65
6.3.3 How to get access to the Quick Setup menu ........................................................................ 67
6.3.4 Keypad functions................................................................................................................... 68
6.3.5 How to save settings changed in Program mode................................................................. 71
6.3.6 Menu overview ...................................................................................................................... 72
6.3.7 Function description ............................................................................................................. 77
6.4 Further information on device configuration in Program mode ................................... 97
6.4.1 Standard setup...................................................................................................................... 97
6.4.2 Empty spectrum recording ................................................................................................. 100
6.4.3 HART® network configuration ........................................................................................... 102
6.4.4 Distance measurement ...................................................................................................... 103
6.4.5 Level measurement ............................................................................................................ 105
6.4.6 How to configure the device to measure volume or mass................................................. 107
6.4.7 How to measure correctly in silos with curved or conical bottoms................................... 109
6.4.8 How to make a filter to remove radar signal interference ................................................ 110
6.5 Status messages and diagnostic data.......................................................................... 111

CONTENTS
5
www.hycontrol.com01/2019 - RC SERIES MANUAL v1
REFLEX RC SERIES
7 Service 118
7.1 Periodic maintenance................................................................................................... 118
7.1.1 General notes...................................................................................................................... 118
7.1.2 Maintenance of the O-rings for the housing covers........................................................... 118
7.1.3 How to clean the top surface of the device......................................................................... 119
7.1.4 How to clean horn antennas under process conditions..................................................... 120
7.2 Service warranty...........................................................................................................120
7.3 Replacement of the VG6 signal converter with the REFLEX RC Series signal converter.
121
7.4 Spare parts availability................................................................................................. 123
7.5 Availability of services .................................................................................................. 123
7.6 Returning the device to the manufacturer................................................................... 124
7.6.1 General information............................................................................................................ 124
7.6.2 Form (for copying) to accompany a returned device.......................................................... 125
7.7 Disposal ........................................................................................................................ 125
8 Technical data 126
8.1 Measuring principle...................................................................................................... 126
8.2 Technical data............................................................................................................... 128
8.3 Measuring accuracy ..................................................................................................... 134
8.4 Minimum power supply voltage ................................................................................... 135
8.5 Guidelines for maximum operating pressure.............................................................. 136
8.6 Dimensions and weights .............................................................................................. 138
9 Description of HART interface 148
9.1 General description ...................................................................................................... 148
9.2 Software history ...........................................................................................................149
9.3 Connection variants...................................................................................................... 149
9.3.1 Point-to-Point connection – analogue / digital mode ........................................................ 149
9.3.2 Multi-Drop connection (2-wire connection) ....................................................................... 150
9.4 HART® device variables............................................................................................... 150
9.5 Field Communicator 475 (FC 475)................................................................................ 150
9.5.1 Installation .......................................................................................................................... 150
9.5.2 Operation............................................................................................................................. 151
9.6 Asset Management Solutions (AMS®) ......................................................................... 151
9.6.1 Installation .......................................................................................................................... 151
9.6.2 Operation............................................................................................................................. 151
9.6.3 Parameter for the basic configuration ............................................................................... 151
9.7 Field Device Tool / Device Type Manager (FDT / DTM) ................................................ 152
9.7.1 Installation .......................................................................................................................... 152
9.7.2 Operation............................................................................................................................. 152
9.8 Process Device Manager (PDM)................................................................................... 152
9.8.1 Installation .......................................................................................................................... 152
9.8.2 Operation............................................................................................................................. 152
9.9 HART® menu tree for AMS.......................................................................................... 153
9.9.1 Overview AMS menu tree (positions in menu tree)............................................................ 153
9.9.2 AMS menu tree (details for settings).................................................................................. 154

CONTENTS
6
www.hycontrol.com 01/2019 - RC SERIES MANUAL v1
REFLEX RC SERIES
9.10 HART® menu tree for PDM........................................................................................ 156
9.10.1 Overview PDM menu tree (positions in menu tree).......................................................... 157
9.10.2 PDM menu tree (details for settings) ............................................................................... 158
10 Appendix 161
10.1 Order code .................................................................................................................. 161
10.2 Spare parts ................................................................................................................. 165
10.3 Accessories: general items........................................................................................ 170
10.4 Accessories: process connection kits........................................................................ 171
10.5 Glossary ...................................................................................................................... 174
11 Notes 177

SAFETY INSTRUCTIONS 1
7
REFLEX RC SERIES
www.hycontrol.com01/2019 - RC SERIES MANUAL v1
1.1 Software history
"Firmware revision" agrees with NAMUR NE 53. It is a series of numbers used to record the
revision status of embedded software (firmware) in electronic equipment assemblies. It gives
data on the type of changes made and the effect that changes have on compatibility.
Data about software revisions is shown in menu 1.1.0 IDENT. For more data, refer to
Function
description
on page 77. If it is not possible to refer to the device menu, record the serial number
of the device (given on the device nameplate) and speak to the supplier.
Changes and effect on compatibility
1Downwards compatible changes and fault repair with no effect on operation (e.g. spelling
mistakes on display)
2-_ Downwards compatible hardware and/or software change of interfaces:
HHART®
PProfibus
FFOUNDATION fieldbus
3-_ Downwards compatible hardware and/or software change of inputs and outputs:
CO Current output
FO,
PO Frequency output / pulse output
SO Status output
LS Limit switch
CI Current input
DDisplay
Release
date
Printed circuit
assembly
Firmware
revision
Electronic
revision
Hardware
revision
Changes and
compatibility
Documentation
2019-03-27 HMI (LCD display
option) BL1.31.06 ER2.0.0_ 4002905801b
1—RC MANUAL R01
Main and Support 4002815701f
Sensor 4002859301a
1If the device does not have the display module option, the module reference number is 4002905802a

1 SAFETY INSTRUCTIONS
8
REFLEX RC SERIES
www.hycontrol.com 01/2019 - RC SERIES MANUAL v1
1.2 Intended use
This radar level transmitter measures distance, level, mass, volume and reflectivity of
granulates and powders.
It can be installed on silos, hoppers and bunkers.
1.3 Certification
The device meets the essential requirements of the EU Directives:
•Electromagnetic Compatibility (EMC) directive
•The safety part of the Low-Voltage directive
•For devices used in hazardous locations: ATEX directive
The manufacturer certifies successful testing of the product by applying the CE marking. For
more data about the EU Directives and European Standards related to this device, refer to the EU
Declaration of Conformity. You can download this document free of charge from the website.
All devices are based on the CE marking and meet the requirements of NAMUR
Recommendations NE 21, NE 43, NE 53 and NE 107.
CAUTION!
Responsibility for the use of the measuring devices with regard to suitability, intended use and
corrosion resistance of the used materials against the measured fluid lies solely with the
operator.
INFORMATION!
The manufacturer is not liable for any damage resulting from improper use or use for other than
the intended purpose.
DANGER!
For devices used in hazardous areas, additional safety notes apply; please refer to the Ex
documentation.
CE marking

SAFETY INSTRUCTIONS 1
9
REFLEX RC SERIES
www.hycontrol.com01/2019 - RC SERIES MANUAL v1
1.4 Radio approvals
1.4.1 European Union (EU)
This level transmitter is approved to be used outside metallic tanks. If you use the device in the
open air, read the device nameplate to make sure that the device can be used for your
application. Only the antennas that follow are permitted for open-air applications:
INFORMATION!
LPR (Level Probing Radar)
LPR (Level Probing Radar)LPR (Level Probing Radar)
LPR (Level Probing Radar) devices measure level in the open air or in a closed space (a metallic
tank etc.). TLPR (Tank Level Probing Radar)
TLPR (Tank Level Probing Radar)TLPR (Tank Level Probing Radar)
TLPR (Tank Level Probing Radar) devices measure level in a closed space only. You
can use LPR devices for TLPR applications. The LPR and TLPR devices meet the requirements of
the RED (Radio Equipment Directive) for use in the member countries of the EU.
For more data about the order code, refer to Order code on page 161
.
Antenna type Order code
316L / DN80 (3¨) Metallic Horn RCxxxxxxxxxx4xxx...
316L / DN100 (4¨) Metallic Horn RCxxxxxxxxxx5xxx...
316L / DN150 (6¨) Metallic Horn RCxxxxxxxxxx6xxx...
316L / DN200 (8¨) Metallic Horn RCxxxxxxxxxx7xxx...
PP / DN80 (3¨) Drop RCxxxxxxxxxxAxxx...
PP / DN100 (4¨) Drop RCxxxxxxxxxxBxxx...
PP / DN150 (6¨) Drop RCxxxxxxxxxxCxxx...
PTFE / DN80 (3¨) Drop RCxxxxxxxxxxExxx...
PTFE / DN100 (4¨) Drop RCxxxxxxxxxxFxxx...
PTFE / DN150 (6¨) Drop RCxxxxxxxxxxGxxx...

1 SAFETY INSTRUCTIONS
10
REFLEX RC SERIES
www.hycontrol.com 01/2019 - RC SERIES MANUAL v1
Figure 1-1: European Union: radio approval information on the nameplate
1 Type code (defined in order). For more data, refer to
Order code on page 161.
2 HVIN (Hardware Version Identification Number). This number gives the radar signal frequency (24GHZ = 24 GHz), the
location of the device (T=TLPR or L=LPR) and the type of signal converter (compact (C))
TLPR device: HVIN: 24GHZ-T-C
LPR device: HVIN: 24GHZ-L-C
3 CE sign
S/N: xxxxxxxxxxxxxxxxxxx
Manufacturing date: YYYY-MM-DD
Tag No: