Hytronik HEM06-T User manual

Hytronik LED driver
25
Hytronik LED driver
26
Model: HEM06-T HEM07-T
Emergency LED Driver
Advanced Version
This emergency lighting module is designed to convert a wide range of LED types, and is an ideal choice for converting most standard LED
luminaires and arrays containing from 4 to 22 ( HEM06-T ) or 4 to 20 ( HEM07-T ) LEDs in series.
This unit is designed to utilize the existing LED driver and panel layout (no need to break into the LED circuit) to be dimmed to 3W/6W in case
of emergency.
The driver can automatically adjust the output LED current to provide the optimum match between the battery and the load, which enables
maximum illumination whilst ensuring full battery duration. The driver is compatible with a wide range of LEDs such as Philips Fortimo DLM, SLM
and LLM ranges, Bridgelux LS/ES/RS ranges, Citizen 4~41W ranges, GE Infusion, Xicato and many others.
Wiring Diagram
Dual Wattage
Emergency Driver
3W 6W
EL-T
Self-testing
Emergency Driver
Emergency
Carrying out routine test on emergency lighting and holding records of the test result is requred by the law. (IEC62034, BS5266, EN50172).
Hytronik advanced LED emergency control model HEM06-T has a internal clock, programmed to interrupt the permanent mains supply at
pre-determined intervals to perform the requested routine testing: 3min. funcitonal test every month, and 1h (3W) & 20min (6W) function test
every 6 months, and 3h (3W) & 1h (6W) function test every 12 months.
------ Self-test starts after the luminaire are connected to mains for continued 48 hours.
------ Auto-commissioning, save manpower and maintenance.
------ Permanently monitors battery and charge condition
------ Dual failure indication: failures are clearly identied on the luminaire by red LED and buzzer.
------ MCU programmed test schedule:
HEM06-T: 3min @ every month;1h (3W) & 20min (6W) @ 6 months; 3h (3W) & 1h (6W) @ 12months.
HEM07-T: Emergency time 3h: 3min @ every month;1h (3W) @ 6 months; 3h (3W) @ 12months. (ex-work defaut value)
Emergency time 1h: 3min @ every month;20min (3W) @ 6 months; 1h (3W) @ 12months.
------ Automatic delayed test in case of power failure at programed testing period.
Self-testing Feature
Highlights
• Deep discharge protection
•
5-Year product warranty
Good compatibility with various brands of LED in the market
• Constant current charger
•
•
High temperature NiMH/Nicd cells
• Automatic output current adjustment
•
•
Wide range of LEDs in series (HEM06-T: 12~70V / HEM07-T: 12~55V)
• With both LED indication and Buzzer warning
• Built-in MCU programed self-testing, maintenance free
• Dual wattage and duration selection:
HEM06-T: 3W @ 3 hrs; 6W @ 1h / HEM07-T: 3W @ 3hrs; 3W @ 1h
Black
Red
Lout
Lin
N
L
LED
Buzzer +
-
+
-
+
-
+
-
From LED driver
Output to LEDs
Battery supply
Reset
3W output
6W output
150
172.5
180
4.5
40.5
22
53.5
30.5
Mechanical Structure
Model: HEM06-T
Model: HEM07-T
Lin
Red
LED indication
Black
Lout
Buzzer
From driver
Output to LEDs
Battery supply
Reset
Emergency time
selection
Sensor
Connection
On-off
Green
Red
Unswitched
LED Driver LED
Battery
1.2V 1.2V 1.2V
1.2V 1.2V 1.2V
HEM06-T
From LED Driver+
-
+
-
+
-
+
-
Output to LEDs
Battery supply
L
Lin
Lout
Buzzer
Red
Black LED Indication
N
Reset
Output
3W
6W

Hytronik LED driver
27
Hytronik LED driver
28
The driver is supplied as standard in conversion kit form, with the following parts:
• 500mm Green & Red charge healthy LED indicator and mounting collar.
• AMP Irreversible battery connector.
• External 5V Buzzer indicator for failure report.
Status Buzzer beep & LED flash mode BuzzerVisual indication
Battery failure Red LED slowly ashes once in 3 seconds;
buzzer beeps 10 seconds every hour.
Green LED slowly ashes once
in 3 seconds
Green LED ashes twice
in 3 seconds
Green LED quickly ashes 3 times
in 3 seconds
LED lamp failure
Emergency LED
driver failure
Red LED rapidly ashes twice in 3 seconds
buzzer beeps 10 seconds every hour.
Red LED rapidly ashes 3 times in 3 seconds
buzzer beeps 10 seconds every hour.
Green LED is constantly on
Battery charge
Battery discharge
Monthly test
6 month test
12 month test
Green LED slowly ashes once
every second
//
Healthy condition
Luminaire Power 5W
HEM06-T @3W 7W 10W 12W 15W 20W
60% 43% 30% 25% 20% 15%
25W 30W 35W 40W 45W 50W
12% 10% 9% 8% 7% 6%
Luminaire Power 5W
HEM07-T @3W 7W 10W 12W 15W 20W
60% 43% 30% 25% 20% 15%
25W 30W 35W 40W 45W 50W
12% 10% 9% 8% 7% 6%
Luminaire Power 7W
@6W 10W 12W 15W 20W
85% 60% 50% 40% 30% 24%
25W 30W 35W 40W 45W 50W 60W
20% 18% 16% 14% 12% 10%
Ballast Lumen Factor %:
Reset Function
HEM06-T Battery options
There is a RESET button on HEM06-T / HEM07-T which are designed to ramdonly initiate the self-testing program after commissioning. it can also
remove “failure indication” after replacing the failed component. Three ways to achieve:
* Short push (<2s): goes to monthly test mode and can clear all failure indications, except the one caused by low battery.
* Long push (<5s): buzzer beeps twice and battery starts charging for 48h, then goes to 12-month test mode. All indications are cleared after test.
* Long push (>10s): buzzer beeps three times, then goes to 12-month test mode. All indications are cleared after test.
BPC05
6 cells, SC type, high
temperature NiMH
battery,
7.2V, 2.5AH
battery bracket, LED
indicator, Buzzer
battery bracket, LED
indicator, Buzzer
battery bracket, LED
indicator, Buzzer
battery bracket, LED
indicator, Buzzer
battery bracket, LED
indicator, Buzzer
battery bracket, LED
indicator, Buzzer
168x50x28 3hrs@3W
BPC08 100x77x28
6 cells, C type, high
temperature NiMH
battery,
7.2V, 4.0AH
3hrs@6W
BPC14 165x46x27
6 cells, SC type,
SC1800,high
temperature Nicd
battery, 7.2V, 1.8AH
3hrs@3W
BPC19 190x33x19
6 cells, AA type,
TH-AA1800T,high
temperature NiMH
battery,
7.2V, 1.8AH
3hrs@3W
BPC20 230x72.5x39.5
6 cells, D type,
D4000,high
temperature Nicd
battery,
7.2V, 4.0Ah
3hrs@6W
BPC21 240x42x23
6 cells, 18720 type,
18720-4000,high
temperature NiMH
battery,
7.2V, 4.0Ah
3hrs@6W
Package
code Picture Spec. Size(mm) Duration Accesaries
Note:* Charge new battery 24h before use.
* High temp. battery pack. 75 degree for NIcd, and 55 degree for NiMH.
* In compliance with IEC61951-1 (Nicd type), IEC61951-2 ( NiMH type).
HEM07-T Battery options
Package
code Picture Spec. Size(mm) Duration Accesaries
BPC10 battery bracket, LED
indicator, Buzzer
battery bracket, LED
indicator, Buzzer
battery bracket, LED
indicator, Buzzer
battery bracket, LED
indicator, Buzzer
215x37x37.5
3 cells, D type,
D4000, high
temperature Nicd
battery,
3.6V, 4.0AH
3hrs@3W
BPC11 100x65x36
3 cells, D type,
D4000, high
temperature Nicd
battery,
3.6V, 4.0AH
3hrs@3W
BPC15 240x23x22.5
3 cells, 18720 type,
18720-4000, high
temperature NiMH
battery,
3.6V, 4.0AH
3hrs@3W
BPC16 58x74x21
3 cells, 18720 type,
18720-4000, high
temperature NiMH
battery,
3.6V, 4.0AH
3hrs@3W
Note: * high temp. battery pack. 75 degree for NIcd, and 55 degree for NiMH.
* Charge new battery 24h before use.
* In compliance with IEC61951-1 (Nicd type), IEC61951-2 ( NiMH type).

DALI + sensorDIM + 1-10V + switch-Dim. + RF wireless, multi-current LED driver! This Hex-Drive is
a multi-task hex-functional LED driver. Save space, save cost, save wiring, save assembly, save inventory and save trouble!
2~50Lux
6
0
6
Detection Pattern
Ambient daylight
threshold
Hex-DriveT M
CONSTANT CURRENT
Driver Mechanical Structure
433 /868 /
315 /915 MHz
Daylight
Monitoring
further 20%
saving
Model: HED1025 1x25W
T M
TM
L
N
Switch-Dim
DIP switch (for LED
current seclection)
RJ12 (sesor antenna)
LED+
LED
-
DALI
DALI
3
254.6
4.2
36
21.5
269
Model: HED1025 HED1050H HED1050L
HED1080H HED1045
manual on
8 hours
DALI + SensorDIMT M + Switch-Dim.+ 1-10V + RF
FLICKER
FREE
100%
60%40%20%
80%
thermal management
<0.5W
STD-BY
DALI RJ12 sensor antenna
1-10V+
1-10V
-
LED
424
413.5
40.5
22
4.5
DIP switch (for LED
current seclection)
+
LED
-
DALI
Switch-Dim
Model: HED1050H 1x50W high current
HED1050L 1x50W low current
HED1080H 1x80W high current
Mains voltage
Mains current
Mains power
Output voltage(U-out Max.)
Power factor
Operation temperature
Battery charge voltage
Battery pack
Battery duration
Over-heat protection
EMC standard
Safety standard
Certication
Dielectric strength
IP grade
220~240VAC 50/60Hz
75VDC
0.75
0~+50℃
Over-heat protection with auto-reset.
EN55015 , EN61547
EN50172, EN61347-2-7, EN61347-2-13 , IEC62034 ,BS5266
Semko,CB, CE , EMC
Input→output: 3750VAC
IP20
13mA - 16mA
3.5W
6V~8.5V
BPC05, BPC08, BPC14,
BPC19, BPC20, BPC21
24 hours
75℃
150VAC~180VAC
3W-- 260mA~40mA (12~70VDC);
6W-- 350mA~80mA (12~70VDC)
150VAC~180VAC
40mA (55VDC)~230mA (12VDC)
1 hour @ 6W/3 hours @3W 3 hours @3W / 1 hour @3W
Battery charge current 200mA (Max.)
220~240VAC 50/60Hz
65VDC
0.75
0~+50℃
27mA - 17mA
4.5W
3V~5.3V
BPC10, BPC11, BPC15, BPC16
200mA (Max.)
Specification
Output LED current
Mains Switch-over voltage range
Model No. HEM06-T HEM07-T
Charge period
Max. case temp.
1. Temperature range for storage (Humidity: Max. 85%)
0 ~ +35℃, one year storage
(Storage time will be shortened if out of this temp. range)
2. Storage duration before use: Less than 6 months from batteries received to start with charging.
Note 1: For Ni-Cd battery, we recommend batteries are charged and discharged at least once every 6 months.
Note 2: For Ni-MH battery, we recommend batteries are charged and discharged at least once every 3 months.
Note 3: Never over discharge the battery.
1. Avoid direct soldering onto cells.
2. Use only within the specied working temperature range.
3. Do not subject batteries to mechanical shock.
1. Avoid throwing cells into a re or attempting to disassemble them. As the electrolyte inside is strong alkaline and can
damage skin and clothes.
2. Avoid short circuiting. It may be leakage.
Cautions In Emergency Battery Usage:
Storage Conditions
Warning
Danger
Hytronik LED driver
29
Hytronik LED driver
30