Hyun Joung System SAVERCALL-3000 User manual

Home Security System
S
SA AV VE ER RC CA AL LL L- -3 30 00 00 0
UserManual
Hyun Joung System Co., Ltd.
Features or exterior may change for improved performance without notice.

2
IMPORTANT – PLEASE READ THIS SECTION FIRST
Savercall-3000 is a Do-It-Yourself Wireless Security System designed to
help users protect themselves, their loved ones, and their property and
personal possessions. Please read through the important information below
before getting started with
Savercall-3000.
• Carefully follow the instructions in this manual when installing, setting up
and programming
Savercall-3000
• Take special notice of any specified notes, bullet points, and so on
throughout this manual
 Warning: Please take the following precautionary measures or it
may lead to serious injury or fatality.
- Do not touch the power switch, adapter or power cord with wet hands.
- Do no place the unit in dusty areas, and avoid exposing the power cord
to heat.
- Do not disassemble or apply shock to the unit, which may lead to
electric shock or short circuit.
- Do not pull the power cord - hold the plug to pull out and cut power.
- This unit is set to work with 230V power source exclusively.
 Warning: Please take the following precautionary measures or it
may lead to minor injury or damage to the product.

3
1. Keep Savercall-3000 away from water or damp areas.
2. Do not use in hot temperatures or humid areas.
3. Do not install
Savercall-3000 in direct sunlight or near
extreme heat.
4. Do not install
Savercall-3000 near strong electrical current
or magnetic force.
5. Avoid dropping
Savercall-3000 or placing it in an area with
strong vibration.
6. Do not disassemble the product – doing so will render the
Warranty void.
7. If elderly people or pregnant women wish to test the siren,
please test from a substantial distance away (about 33ft).
8. Use soft fabric to clean the unit.
- Using water, alcohol, benzine, or thinner may cause damage
to the unit.
9. Do not let pins, dust, or foreign substances enter the interior
of the unit.
10. Turn off the power when inserting the adapter for DC input.
- Use only the adapter provided by our company. We will not
be responsible for any damage caused from using non-
standard adapters.

4
11. Disconnect the plug from the power source when the unit is
not used for a long period of time.
12. If strange noises are heard while operating the unit, turn off
the power and contact your local service center.
13. The warranty period of the rechargeable battery is 6 months.
The battery’s life will shorten with time. Check the battery
every 3 months for proper operation. Use only the battery
provided by our company when replacing with a new one.
14. Do not connect the keyphone (local switchboard controller)
to Savercall-3000 or it may cause damage to the product.
15. When lightning is expected, disconnect the phone line from
the unit for protection.
Hyun Joung Systems Co., Ltd. is a company focused on ensuring our
customers the greatest level of satisfaction. If you have any comments or
questions, feel free to contact us at:
Or visit our website at: www.hjsys.co.kr
To better understand Savercall-3000 and its performance capabilities, users
should test the entire system at least once a week

5
CONTENTS
Section Page
Savercall-3000 Features & Benefits ……………………….. 8-11
Main Components & Optional Accessories ……………………..12
Main function …………………………………………………………..13
Over view of
Savercall-3000 ………………………………….. 14-15
Details of main unit & sensors……………………………………..16
- Main Unit………………………………………………………………………………………..16
- Remote controller ………………………………………………………………………….. 17
- Door Sensor ………………………………………………………………………………….. 18
- Motion Detector …………………………………………………………………………….. 19
Installation & Setup ………………………………………………… 20
How to install Motion Detector…………………………………………………………….. 21
How to install Door Sensor …………………………………………………………………. 22
Initial Setup ……………………………………………………………………………………….23
Menu Summary …………………………………………………………………………………. 24
Main Menu(How to set up Main Unit) ……………………………………………… 25
1-To set password ………………………………………………………….25
2-Sensor registration ………………………………………………………26
- Remote controller ………………………………………………………………………. 26
- Door Sensor ………………………………………………………………………………. 28
- Motion Detector …………………………………………………………………………. 30
3-Record user message ………………………………………………31-32
4-To input alarm delay time …………………………………………32-33
5-To input telephone number ……………………………………… 34-37

6
6-To set up the current time/day ………………………………….37-38
0-To finish setting mode ………………………………………………….39
7-To set up additional menu ……………………………………………. 39
Additional Menu ……………………………………………………. 40
1-To set up delay tone sound …………………………………………40
2-To set up remote controller sound ………………………………. 40
3-To set up chime bell sound ………………………………………… 41
4-To set up ringer sound ……………………………………………… 41
5-To set up CID function ……………………………………………… 42
6-To set up morning call ……………………………………………….43
7-To set up automatic controller mode ………………………. 44-46
8-To set up siren activation time …………………………………….46
9-To set up ringer time …………………………………………………46
To set up guide volume …………………………………………………47
O-To finish additional menu …………………………………………..48
To finish setting mode ………………………………………………….48
Examples of How Savercall-3000 Works ……………………… 49
Burglary Example ………………………………………………………… 49
Emergency call Example ……………………………………………….. 50
User Guide …………………………………………………………….. 51
1-To enter setting mode ………………………………………………. 51
2-To enter alarm away mode …………………………………………51
3-To enter alarm home mode …………………………………………52
4-To return to wait mode ………………………………………………53
5-To make an emergency call ……………………………………….. 53
6-Receiving & Responding to an alarm notification call …. 54-58
7-To remote control Savercall-3000 via Telephone ………..58-60
8-How to use telephone with main unit ……………………… 60-61

7
9-How to use CID function ………………………………………. 61-64
10-How to use siren with main unit ……………………………….. 64
11-LED status according to mode & status ………………………. 65
12-In case of disconnection of telephone line ………………….. 65
13-In case of power failure ………………………………………….. 66
14-In case of low sensors battery ………………………………….. 67
15-In case of changing the characteristics of sensors …… 67-70
16
- How to check LCD & delete the record in the event of a situation 70-71
Savercall-3000 Specifications ……………………………………. 72
Savercall-3000 Optional Sensors ……………………………….. 73
Troubleshooting (Q & A) ……………………………………… 74-75
Technical Support, Customer Care & Sales …………………… 76
Warranty Information ………………………………………… 77-78

8
Savercall-3000 Features & Benefits
Feature Benefit
Do-It-Yourself Wireless
System
• FM frequency: Up to 150ft. range
covers the entire house, apartment,
small business, etc.
• No hard-wired installation necessary
• Simple screw-in or double-sided
tape mounting
LCD display and Voice-
Guided Setup &
Operation
• Simple programming & operation
• Very user-friendly
• Voice-prompts for responses
• All setup & programming options
are Password-protected
Remote Control • Allows for easy “alarm on”, “alarm off”
& emergency calls directly from the
remote controller
“Alarm away” & “Alarm
home” Security Modes
• Various programming & arming
options for “Alarm away” or “Alarm
home”mode.
• Support of “Alarm home” mode
without Motion detector
CID(Caller-ID) function • It saves maximum 20 phone
numbers
• Supports redial function

9
Automatic mode
conversion
• Supports automatic conversion
among alarm-home, alarm-away
and off mode
• User can assign conversion time
Record of sensor
activation
• Records what caused sensor
activation.
• User can check memory through
remote control and LCD.
Support of wire
extension port
• Support of various wire sensors as
an option
Loud Siren
(Including built-in siren)
• Immediately deters intruders
• Alerts users, neighbors & others of
an Alarm Activation
Auto-Dialer • Automatically calls up to five
specified phone numbers upon
alarm activation & plays pre-
recorded voice messages
• Voice-prompts for responses
• Can call out & notify any telephone,
cellular phone of an Alarm Activation
SOS call function • Auto-dialer function through SOS
button on Main unit & Remote
controller

10
Phone line disconnection
alarm
• Voice and LCD notification when
phone line is disconnected
Powersupply disconnection
alarm
• Voice and LCD notification when
power supply is disconnected
Remote Operation via
Telephone
• Call in to alarm-home, alarm away
& program system from anywhere in the
world
• Monitor situation or speak directly
to an intruder
Exclusive Integrated
Speakerphone
(Telephone function)
• Usage as a telephone through
speakerphone
• Allows for advanced 2-way voice
communication
• Converse with emergency personnel
during an on-site crisis situation
1-button Emergency Call
(SOS call function)
• Make on-site emergency calls
directly from remote controller &
main unit by pressing SOS button
• Call out to emergency personnel
during on-site panic or crisis
situations
Various additional
functions
• Support of various functions such as
chime bell alarm, wake-up call, etc.
Rechargeable Backup • Backs up Main unit in the event of a

11
Battery power outage
Long-Life Sensor
Batteries
• Door Sensor & remote controller
contain replaceable long-life
batteries
• Notifies users of any low-battery
situation
Memory Chip Stores All
Programmed Data
• Retains programmed settings for all
User Functions, even during power
outages

12
Main Components & Optional Accessories
MainUnit MotionDetector DoorSensor RemoteController
WiredSiren MotionDetector DoorSensor Bracket
(BatteryAA1.5VX4EA) (Battery AAA1.5V X 2EA)
A
dapter AC230V 50Hz DoorSensorSpacer TelephoneLine2EA
(DC9V, 500mA)
UserManual WarningSticker PocketManual

13
* As a multifunctional wireless security system, SAVERCALL-3000 provides a
reliable, complete security solution for the home or office.
Main Function
Door Sensor Fire Sensor (Optional)
Wired Siren
“
SOS” button
In the event of an emergency
situation, press “SOS’ button
for more than 2 seconds.
Call out to emergency
personnel during on-site panic
or emergency situations
 Automatically calls up to five
programmed phone numbers upon
alarm activation and plays
pre-recorded voice messages
 Listen in on the situation or
speak directly to the person who inside
Remote controller Telephone Line
SOS
Motion Detector
Wireless Repeater/ Siren
(Optional)
230V AC POWER

14
1. In case of intrusion
1) Door sensor or Motion detector will detect intrusion, and Savercall-3000
will sound alarm.
2) Siren will sound, and ‘Alarm notification call’ will call the programmed
phone numbers.
3) SAVERCALL-3000 will call the first phone number.
4) If the call is answered, SAVERCALL-3000 will notify the situation
and play the recorded user’s message. After this process, the
menu will be voice guided to allow the receiver to control remotely.
• If the receiver answers the phone, Savercall-3000 will operate upon
the user’s selection.
• If the receiver doesn’t press 0, Savercall-3000 considers the phone
not answered even if the receiver answered the phone, and tries to
call the next phone number. If there is no answer, Savercall-3000
repeats this process three times.
2. Emergency call
1) An emergency situation occurs within the detection range of
SAVERCALL –3000.
2) The user should press the “SOS” button of the remote controller or
main unit.
3) SAVERCALL –3000 immediately dials the programmed phone number.
Overview of Savercall-3000

15
3. Voice Guided Menu for Alarm Notification Call
- To speak (no.1)
- To wiretap (no.2)
- To start siren (no.3)
- To enter ‘Wait mode’ (no.4)
- To stop all dialing (no.8)
- To hang up the phone and dial the next phone no (no.9)
- To hear repeatedly (no.0)
4. Voice Guided Menu for Remote Control Mode
-Tospeak(no.1)
- To wiretap (no.2)
-Tostartsiren(no.3)
-Toenter‘Waitmode’(no.4)
- To enter alarm away mode (no.5)
- To enter alarm home mode (no.6)
- To stop remote control (no.9)
- To hear repeatedly (no.0)

16
 Front side
 Back side
Details of main unit & sensors
A
C adapter jack
(AC230/50Hz,
DC9V, 500mA)
Siren switch Power switch
Backup battery
T
elephone line por
t
Wired siren jack
Extension port
(Optional)
LCD
Antenna
S
p
eaker
SOS button
Press for 2 seconds in emergencies
Key button
Microphone

17
 Remote Controller
How to replace battery
Open the cover using a screwdriver and replace the battery when necessary
with: CR2032 3V x 1 ea.
Observe (+) and (-) ends.
If the battery is low:
* LED light appears dim or doesn’t work.
* Battery life: 1 year
* The range of operations and functions may be shortened.
* Replace the battery when necessary.
A
larm button
Press to enter
‘
Alarm mode’.
Off button
Press to enter ‘Wait mode’.
SOS button
Press in the event of an
emergency situation.
When you re
g
ister the main unit, please press
all 3 buttons together.
LED

18
 Door Sensor
How to replace batteries
Open the cover as below and replace the batteries when necessary with:
AAA-1.5V x 2 ea.
Observe (+) and (-) ends.
If the battery is low:
* Under wait mode, main unit alerts with the following voice messages:
- “Door sensor has been activated.”
- “Battery is low.”
* Battery lasts approx. one and a half years.
* Change the battery when necessary.
Please press this part for 2 seconds when
you attach the main unit.
Within 1Cm(0.4inch)
Magnetic
LED

19
 Motion Detector
Power Switch
Open the lid and replace all
batteries when necessary
A
A-1.5 x4a
(Observe (+) and (-)ends.)
Open the lid as shown above to replace
battery or attach motion sensor.
Pull down the string to replace with new batteries.
Turn on the power switch
when you attach motion
detector to the main unit.
Do not touch the sensor area.
Use a soft fabric to clean this part
when dirty.

20
If the battery is low:
* Under wait mode, main unit alerts with the following voice messages:
- “Motion Detector has been activated.”
- “Battery is low.”
* If Motion detector detects movement, it makes a ‘beep’ sound.
* Battery lasts approx. 10 months.
* Change the battery when necessary.
Installation & Setup of the main unit
 Installation of the main unit.
 Telephone line connection with the main unit.
 Configure the connection as shown below when using a single phone
line with Savercall-3000
 A/C adapter connection (AC230V 50Hz, DC9V/500mA)