IBM x3350 - System - 4192 User manual

IBM System x3350 Ty pes 4192 and 4193
User’s Guide


IBM System x3350 Ty pe s 4192 and 4193
User’s Guide


Note:
Before using this information and the product it supports, read the general information in “Notices,” on page 71.
First Edition (January 2008)
©Copyright International Business Machines Corporation 2008. All rights reserved.
US Government Users Restricted Rights –Use, duplication or disclosure restricted by GSA ADP Schedule Contract
with IBM Corp.

Contents
Safety ............................v
Chapter 1. The System x3350 Types 4192 and 4193 server ........1
Related documentation ......................1
Notices and statements used in this document..............2
Features and specifications.....................3
What your server offers ......................5
Reliability, availability, and serviceability ................7
IBM Director ..........................7
The UpdateXpress program ....................8
Server controls, LEDs, and power ..................8
Front view ..........................9
Rear view ..........................11
Server power features .....................12
Chapter 2. Installing optional devices................15
Server components .......................15
System-board internal connectors .................16
System-board external connectors.................17
System-board switches and jumpers ................18
System-board LEDs ......................19
System-board optional-device connectors ..............20
Installation guidelines ......................20
System reliability guidelines ...................21
Working inside the server with the power on .............22
Handling static-sensitive devices .................22
Removing the server cover ....................23
Installing ahot-swap power supply .................24
Installing aYpower cable .....................25
Installing ahard disk drive.....................26
Installing ahot-swap hard disk drive ................26
Installing asimple-swap hard disk drive ...............27
Installing an adapter .......................28
Installing an optional ServeRAID-MR10i SAS/SATA controller (hot-swap models) 29
Installing amemory module (DIMM) .................31
Installing an optional SATA RAID kit .................34
Installing aRemote Supervisor Adapter II SlimLine............36
Completing the installation.....................38
Replacing the server cover ...................38
Connecting the cables .....................38
Updating the server configuration .................39
Chapter 3. Configuring the server .................41
Using the Configuration/Setup Utility program .............42
Starting the Configuration/Setup Utility program ............42
Configuration/Setup Utility menu choices ..............42
Passwords .........................47
Using the Boot Menu program ...................49
Using the ServerGuide Setup and Installation CD ............49
ServerGuide features .....................49
Setup and configuration overview .................50
Typical operating-system installation ................50
Installing your operating system without using ServerGuide .......51
©Copyright IBM Corp. 2008 iii

Using the LSI Logic Configuration Utility program ............51
Starting the LSI Logic Configuration Utility program ..........52
Formatting aSAS/SATA hard disk drive ...............52
Creating aRAID array of SAS/SATA hard disk drives ..........52
Using the baseboard management controller ..............53
Enabling and configuring SOL using the OSA SMBridge management utility
program .........................53
Installing the OSA SMBridge management utility program ........61
Using the baseboard management controller utility programs .......63
Enabling the Broadcom Gigabit Ethernet Utility program..........66
Configuring the Broadcom Gigabit Ethernet controller...........66
Updating IBM Director ......................67
Setting up aRemote Supervisor Adapter II SlimLine ...........67
Requirements ........................67
Cabling the Remote Supervisor Adapter II SlimLine ..........68
Installing the Remote Supervisor Adapter II SlimLine firmware ......68
Completing the setup .....................69
Appendix. Notices .......................71
Trademarks ..........................71
Important notes.........................72
Product recycling and disposal ...................73
Battery return program ......................74
German Ordinance for Work gloss statement ..............76
Index ............................77
iv IBM System x3350 Types 4192 and 4193: User’s Guide

Safety
Before installing this product, read the Safety Information.
Antes de instalar este produto, leia as Informações de Segurança.
Pred instalací tohoto produktu si prectete prírucku bezpecnostních instrukcí.
Læs sikkerhedsforskrifterne, før du installerer dette produkt.
Lees voordat udit product installeert eerst de veiligheidsvoorschriften.
Ennen kuin asennat tämän tuotteen, lue turvaohjeet kohdasta Safety Information.
Avant d’installer ce produit, lisez les consignes de sécurité.
Vor der Installation dieses Produkts die Sicherheitshinweise lesen.
Prima di installare questo prodotto, leggere le Informazioni sulla Sicurezza.
Les sikkerhetsinformasjonen (Safety Information) før du installerer dette produktet.
Antes de instalar este produto, leia as Informações sobre Segurança.
Antes de instalar este producto, lea la información de seguridad.
Läs säkerhetsinformationen innan du installerar den här produkten.
©Copyright IBM Corp. 2008 v

Important:
Each caution and danger statement in this document is labeled with a
number. This number is used to cross reference an English-language
caution or danger statement with translated versions of the caution or
danger statement in the Safety Information document.
For example, if acaution statement is labeled "Statement 1",
translations for that caution statement are in the Safety Information
document under "Statement 1."
Be sure to read all caution and danger statements in this document
before you perform the procedures. Read any additional safety
information that comes with the server or optional device before you
install the device.
vi IBM System x3350 Types 4192 and 4193: User’s Guide

Statement 1:
DANGER
Electrical current from power, telephone, and communication cables is
hazardous.
To avoid ashock hazard:
vDo not connect or disconnect any cables or perform installation,
maintenance, or reconfiguration of this product during an electrical
storm.
vConnect all power cords to aproperly wired and grounded electrical
outlet.
vConnect to properly wired outlets any equipment that will be attached to
this product.
vWhen possible, use one hand only to connect or disconnect signal
cables.
vNever turn on any equipment when there is evidence of fire, water, or
structural damage.
vDisconnect the attached power cords, telecommunications systems,
networks, and modems before you open the device covers, unless
instructed otherwise in the installation and configuration procedures.
vConnect and disconnect cables as described in the following table when
installing, moving, or opening covers on this product or attached
devices.
To Connect: To Disconnect:
1. Turn everything OFF.
2. First, attach all cables to devices.
3. Attach signal cables to connectors.
4. Attach power cords to outlet.
5. Turn device ON.
1. Turn everything OFF.
2. First, remove power cords from outlet.
3. Remove signal cables from connectors.
4. Remove all cables from devices.
Safety vii

Statement 2:
CAUTION:
When replacing the lithium battery, use only IBM®Part Number 33F8354 or an
equivalent type battery recommended by the manufacturer. If your system has
amodule containing alithium battery, replace it only with the same module
type made by the same manufacturer. The battery contains lithium and can
explode if not properly used, handled, or disposed of.
Do not:
vThrow or immerse into water
vHeat to more than 100°C (212°F)
vRepair or disassemble
Dispose of the battery as required by local ordinances or regulations.
viii IBM System x3350 Types 4192 and 4193: User’s Guide