IBM xSeries 335 User manual

IBM xSeries 335 Type 8676
Option Installation Guide
ERserver


IBM xSeries 335 Type 8676
Option Installation Guide
ER s e r v e r


Note:
Before using this information and the product it supports, read the general information in “Notices” on
page 41.
First Edition (August 2002)
© Copyright International Business Machines Corporation 2002. All rights reserved.
US Government Users Restricted Rights – Use, duplication or disclosure restricted by GSA ADP Schedule Contract
with IBM Corp.

Contents
Safety ............................v
Chapter 1. Introduction ......................1
Related publications .......................1
Notices and statements used in this book ...............2
Major components of the xSeries 335 Type 8676 server ..........3
System-board internal connectors ..................4
System-board switches and jumpers .................5
System-board external connectors ..................6
System-board LEDs .......................7
System-board option connectors ...................8
Light Path Diagnostics panel ....................9
Chapter 2. Installing options ...................11
Installation guidelines ......................11
System reliability guidelines ...................11
Handling static-sensitive devices .................11
Removing the cover and bezel ...................12
Working with adapters ......................13
Installing an adapter .......................15
Working with a hard disk drive ...................16
Installing a hot-swap hard disk drive ................17
Installing a non-hot-swap hard disk drive ..............17
Installing memory modules ....................19
Installing a microprocessor ....................21
Replacing the battery ......................25
Replacing a fan assembly .....................26
Completing the installation.....................27
Installing the cover and bezel ..................27
Cabling the server........................28
Cabling a C2T chain ......................28
Cabling an ASM interconnect network ...............32
Updating the server configuration ..................34
Chapter 3. I/O connectors ....................37
C2T connectors ........................37
C2T breakout cable connectors ...................37
Ethernet connector .......................38
Integrated system management connector ...............39
Serial connector ........................39
Universal Serial Bus connectors ..................39
Appendix. Notices .......................41
Edition notice .........................41
Trademarks ..........................42
Important notes.........................42
Electronic emission notices ....................43
Federal Communications Commission (FCC) statement .........43
Industry Canada Class A emission compliance statement ........44
Australia and New Zealand Class A statement ............44
United Kingdom telecommunications safety requirement.........44
European Union EMC Directive conformance statement .........44
Taiwanese Class A warning statement ...............44
© Copyright IBM Corp. 2002 iii

Japanese Voluntary Control Council for Interference (VCCI) statement . . . 45
Power cords ..........................45
Index ............................47
iv IBM xSeries 335 Type 8676: Option Installation Guide

Safety
Before installing this product, read the Safety Information.
Antes de instalar este produto, leia as Informações de Segurança.
Pred instalacítohoto produktu si prectete prírucku bezpecnostních instrukcí.
Læs sikkerhedsforskrifterne, før du installerer dette produkt.
Lees voordat u dit product installeert eerst de veiligheidsvoorschriften.
Ennen kuin asennat tämän tuotteen, lue turvaohjeet kohdasta Safety Information.
Avant d’installer ce produit, lisez les consignes de sécurité.
Vor der Installation dieses Produkts die Sicherheitshinweise lesen.
Prima di installare questo prodotto, leggere le Informazioni sulla Sicurezza.
Les sikkerhetsinformasjonen (Safety Information) før du installerer dette produktet.
Antes de instalar este produto, leia as Informações sobre Segurança.
© Copyright IBM Corp. 2002 v

Antes de instalar este producto, lea la información de seguridad.
Lässäkerhetsinformationen innan du installerar den här produkten.
Statement 1
Danger
Electrical current from power, telephone, and communication cables is hazardous.
To avoid a shock hazard:
vDo not connect or disconnect any cables or perform installation, maintenance, or
reconfiguration of this product during an electrical storm.
vConnect all power cords to a properly wired and grounded electrical outlet.
vConnect to properly wired outlets any equipment that will be attached to this
product.
vWhen possible, use one hand only to connect or disconnect signal cables.
vNever turn on any equipment when there is evidence of fire, water, or structural
damage.
vDisconnect the attached power cords, telecommunications systems, networks, and
modems before you open the device covers, unless instructed otherwise in the
installation and configuration procedures.
vConnect and disconnect cables as described in the following table when installing,
moving, or opening covers on this product or attached devices.
To connect:
1. Turn everything OFF.
2. First, attach all cables to devices.
3. Attach signal cables to connectors.
4. Attach power cords to outlet.
5. Turn device ON.
To disconnect:
1. Turn everything OFF.
2. First, remove power cords from outlet.
3. Remove signal cables from connectors.
4. Remove all cables from devices.
Statement 2
CAUTION:
When replacing the lithium battery, use only IBM Part Number 33F8354 or an
equivalent type battery recommended by the manufacturer. If your system has a
module containing a lithium battery, replace it only with the same module type made
by the same manufacturer. The battery contains lithium and can explode if not
properly used, handled, or disposed of.
Do not:
vThrow or immerse into water.
vHeat to more than 100°C (212°F)
vRepair or disassemble
Dispose of the battery as required by local ordinances or regulations.
vi IBM xSeries 335 Type 8676: Option Installation Guide

Statement 3
CAUTION:
When laser products (such as CD-ROMs, DVD drives, fiber optic devices, or
transmitters) are installed, note the following:
vDo not remove the covers. Removing the covers of the laser product could result in
exposure to hazardous laser radiation. There are no serviceable parts inside the
device.
vUse of controls or adjustments or performance of procedures other than those
specified herein might result in hazardous radiation exposure.
Danger
Some laser products contain an embedded Class 3A or Class 3B laser diode. Note the
following. Laser radiation when open. Do not stare into the beam, do not view directly with
optical instruments, and avoid direct exposure to the beam.
Statement 4
≥18 kg (39.7 lb) ≥32 kg (70.5 lb) ≥55 kg (121.2 lb)
CAUTION:
Use safe practices when lifting.
Safety vii

Statement 5
CAUTION:
The power-control button on the device and the power switch on the power supply do
not turn off the electrical current supplied to the device. The device also might have
more than one power cord. To remove all electrical current from the device, ensure
that all power cords are disconnected from the power source.
1
2
Statement 8
CAUTION:
Never remove the cover on a power supply or any part that has the following label
attached.
Hazardous voltage, current, and energy levels are present inside any component that
has this label attached. There are no serviceable parts inside these components. If you
suspect a problem with one of these parts, contact a service technician.
Statement 10
CAUTION:
Do not place any object weighing more than 82 kg (180 lb) on top of rack-mounted
devices.
>82 kg (180 lb)
viii IBM xSeries 335 Type 8676: Option Installation Guide

Chapter 1. Introduction
This Option Installation Guide contains instructions for installing, removing, and
connecting optional devices that your server supports.
Related publications
The following documentation comes with your server:
vUser’s Guide
This publication is in Portable Document Format (PDF) on the IBM
®
xSeries
Documentation CD. It contains general information about your server.
vInstallation Guide
This printed publication contains instructions for setting up your server and basic
instructions for installing some options.
vOption Installation Guide
This publication is in PDF on the IBM xSeries Documentation CD. It contains
detailed instructions for installing, removing, and connecting optional devices that
your server supports.
vSafety Book
This publication is in PDF on the IBM xSeries Documentation CD. It contains
translated caution and danger statements. Each caution and danger statement
that appears in the documentation has a number that you can use to locate the
corresponding statement in your language in the Safety Book.
vRack Installation Instructions
This printed publication contains instructions for installing your server in a rack.
vHardware Maintenance Manual and Troubleshooting Guide
This publication is in PDF on the IBM xSeries Documentation CD. It contains
information to help you solve problems yourself, and it contains information for
service technicians.
Depending on your server model, additional publications might be included on the
IBM xSeries Documentation CD.
© Copyright IBM Corp. 2002 1

Notices and statements used in this book
The caution and danger statements that appear in this book are also in the
multilingual Safety Book, which is on the IBM xSeries Documentation CD. Each
statement is numbered for reference to the corresponding statement in the Safety
Book.
The following notices and statements are used in the documentation:
vNotes: These notices provide important tips, guidance, or advice.
vImportant: These notices provide information or advice that might help you avoid
inconvenient or problem situations.
vAttention: These notices indicate potential damage to programs, devices, or
data. An attention notice is placed just before the instruction or situation in which
damage could occur.
vCaution: These statements indicate situations that can be potentially hazardous
to you. A caution statement is placed just before the description of a potentially
hazardous procedure step or situation.
vDanger: These statements indicate situations that can be potentially lethal or
extremely hazardous to you. A danger statement is placed just before the
description of a potentially lethal or extremely hazardous procedure step or
situation.
2IBM xSeries 335 Type 8676: Option Installation Guide

Major components of the xSeries 335 Type 8676 server
The blue color on components and labels indicates touch points, where a
component can be gripped, a latch moved, and so on.
The following illustration shows the major components in the server. It shows a
SCSI hot-swap hard disk drive model. An IDE non-hot-swap hard disk drive model
is also available. The illustrations in this publication might differ slightly from your
hardware.
Microprocessor
heat sink
Microprocessor
Microprocessor
VRM
Dual inline
memory module
(DIMM)
System board
Air baffle
Microprocessor fans CD-ROM/Diskette
drive assembly
Hot-swap hard disk
drive SCSI backplane
(SCSI model only)
Power supply
Hard disk drive
fan/air baffle
Power-cord box
Hard disk drive
Filler panel
Bezel
Heat sink
retention
module
USB option tray
Chapter 1. Introduction 3

System-board internal connectors
The following illustration shows the internal connectors on the system board.
Remote Supervisor
Adapter
(J2)
CD-ROM (J7)
SCSI backplane
signal (J8)
Fan 5 (J5)
Primary IDE
(J17)
Diskette drive
(J51)
Microprocessor
fan 1 (J19)
Microprocessor
fan 2 (J20)
Microprocessor
fan 3 (J47)
Microprocessor
fan 4 (J48)
Front panel
(J10)
System board
power (J21)
SCSI backplane/IDE
power (J18)
System board
power (J6)
Front USB
(J14)
CD-ROM drive
power (J53)
4IBM xSeries 335 Type 8676: Option Installation Guide

System-board switches and jumpers
The following illustration shows the location of the switches and jumper blocks on
the system board.
Any jumper blocks on the system board that are not shown in the illustration are
reserved. See the section on recovering the BIOS code in the Hardware
Maintenance Manual and Troubleshooting Guide for information about the flash
ROM page-swap jumper.
Flash ROM
jumper (J38) Video disable
jumper (J9)
PCI/PCI-X
jumper (J12)
Password
override
jumper (J28)
Light Path
Diagnostics
panel test
(SW1)
Chapter 1. Introduction 5

System-board external connectors
The following illustration shows the external input/output connectors on the system
board.
ISM port (J30)
C2T OUT
port (U46)
C2T IN
port (U2)
Serial port (J11)
Ethernet port
(dual, J33)
USB port
(J36)
6IBM xSeries 335 Type 8676: Option Installation Guide

System-board LEDs
The following illustration shows the light-emitting diodes (LEDs) on the system
board.
PCI/PCI-X select
(CR1)
DIMM 4
(CR32)
DIMM 3
(CR30)
DIMM 2
(CR31)
DIMM 1
(CR 29)
System board
VRM
(CR40)
Fan 5 (CR2)
Microprocessor
fan 1 (CR19)
Microprocessor
fan 2 (CR20)
Microprocessor
fan 3 (CR43)
Microprocessor
fan 4 (CR44)
Microprocessor 2
(CR27)
Microprocessor 2
VRM (CR42)
Microprocessor 1
VRM (CR41)
Microprocessor 1
(CR28)
Integrated system
management processor
(CR59)
Light path
diagnostic panel
(CR82)
Light Path
Diagnostics error
LEDs
Chapter 1. Introduction 7

System-board option connectors
The following illustration shows the connectors on the system board for
user-installable options.
DIMM 4 (J37)
DIMM 3 (J35)
DIMM 2 (J34)
DIMM 1 (J32)
PCI-X
slot 1 (J1)
PCI-X
slot 2 (J3)
Remote Supervisor
Adapter (J2)
Microprocessor 2
(U121)
Microprocessor 1
(U82)
Battery
Microprocessor 2
VRM (J42)
Note: The VRM for microprocessor 1 is integrated into the system board.
8IBM xSeries 335 Type 8676: Option Installation Guide

Light Path Diagnostics panel
The following illustration shows the error LEDs, light path button, and test LED on
Light Path Diagnostics panel on the system board.
CPU
MEM
PCI A PCI B PCI C
VRM CNFG
DASD
SP PS
NON
OPT
NMI
TEMP FAN
Light Path Diagnostics™
Light path
button (SW1)
Test LED
(CR82)
For more information about the Light Path Diagnostics feature, see the Hardware
Maintenance Manual and Troubleshooting Guide. The following table describes the
LEDs on the Light Path Diagnostics panel.
Table 1. Light Path Diagnostics panel LEDs
Light Path
Diagnostics panel
LED
Description
CPU One of the microprocessors failed.
VRM A voltage regulator module (VRM) failed.
CNFG The microprocessor or microprocessor VRM configuration is incorrect.
MEM System memory failed.
SP The integrated system management processor (ISMP) failed.
PS The power supply failed.
TEMP The temperature exceeded a threshold level.
FAN A fan (1, 2, 3, 4, or 5) failed or is operating slowly.
DASD A SCSI hard disk drive failed.
PCIA PCI-X slot 2 failed or the integrated SCSI adapter failed.
PCIB An integrated Ethernet controller or PCI slot 1 failed.
PCIC PCI slot 1 or the integrated video adapter failed.
NMI A nonmaskable interrupt occurred.
NON OPT A PCI bus is not operating at maximum efficiency.
If you remove the server from the rack and you are using the Light Path
Diagnostics LEDs to diagnose a problem, you can press the Light Path button to
light any LEDs that were lit before you unplugged the server.
Chapter 1. Introduction 9

10 IBM xSeries 335 Type 8676: Option Installation Guide