Iceco VL75/90 ProD User manual

VL75/90 ProDIf you have any questions or concerns, please email us at offi[e-mail]

CatalogueCatalogue1 1---------Tips For Opening The Door2 2----------------------Supply Details3 3---------------------------Operation4 10---------Cleaning And Maintenance5 12-----------Error Codes & Solutions6 14----------Warranty & Return Policy7 15-----------Troubleshooting (Q & A)8 20-----------------Safety Instructions

Tips For Opening The Door1011. To open the lid from the right side, keep fingers together and grip the right latch.2. Push the latch inwards and lift up the lid.3. To open the lid from the left side, repeat the above steps.4. Grip the latch on both sides and push them inwards to disassemble the lid.

Supply DetailsRefrigerator x1Wire Basket x2110V AC Wall Outlet Cable X1 12/24V DC Cigarette Lighter Plug Cable x1 022Drain Plugx 1Screwsx 2Corner Guardsx 4Handlex 1Screwdriverx 1Extra Content

3OperationABACEDFGLEFTRIGHT03BPower ON/OFF ButtonCCompressor Speed (Eco/Max Mode)ABattery Protection Settings

DRight Zone Temp DOWN ButtonTIPS: Two display screens correspond to the left and right zone respectively.04ERight Zone Temp UP ButtonFLeft Zone Temp UP ButtonGLeft Zone Temp DOWN Button3.1 MAX & ECO ModeWith the unit turned on(Press & Hold B/Power Button), you can press the MODE Button C to toggle between MAX or ECO mode for the fridge.ABACEDFG

053.2 Switch Between °C and °FWith the unit turned on(Press & Hold B/Power Button), press and hold Button C and Button D for 3 seconds to toggle between the temperature values of Celsius & Fahrenheit.ABACEDFG

063.3 Setting TemperatureWith the unit turned on, the fridge's CURRENT interior temperature reading will appear on the display, as a solid non-flashing number. To change the fridge's set temperature: ABACEDFGPress Temperature Up(Button E/F) to increase the temperature of the right/left zone. Press Temperature Down(Button D/G) to decrease the temperature of the right/left zone.The SET temperature will appear as a FLASHING number and after the temperature is SET, the display will return to show the fridge’s CURRENT interior temperature.

3.4 Single Zone Mode07With the unit turned on: Press and hold Temperature UP Button F and Temperature DOWN Button G to turn on/off left zone. Press and hold Temperature UP Button E and Temperature DOWN Button D to turn on/off right zone.ABACEDFG

3.5 Triple Battery Protection OperationNOTE: Details of Battery Protection Mode could be found in Page 17.08With the unit turned on, press Battery Protection Button A to adjust the fridge's low battery protection level pre-sets.ABACEDFG

3.6 USB ConnectorTIPS: USB connector only takes effect when charging in DC power cord.+09

Cleaning And Maintenance 44.1 CleaningAlways unplug the fridge before cleaning the fridge.You can clean the interior and exterior of the fridge by using warm water, mixed with a gentle non-abrasive detergent.You may use a soft sponge, or micro fiber cloth.When not in use, it’s better to leave the lids open to reduce odors. If odors occur, please clean the fridge thoroughly, or use baking soda in a bowl to absorb odors.10

4.2 DO NOTUse pointed objects to scrape, or defrost ice. Use abrasive detergents to clean.Use heavy duty sponges (due to scratching).Clean the fridge with running water or pressure washer.Clean the fridge without power input covers secured. 11

12Error Codes & Solutions5The DC voltage is below the protection settings and the battery protection mode is activated.E1CodeDescriptionThe cooling fan is over-loaded with more than 1A of current.E2Motor start error The motor of compressor is blocked or the pressure difference in the refrigeration system is too high.E3Minimum motor speed error The compressor is over-loaded, and the motor cannot maintain its minimum speed of 1850 rpms.E4Thermal cut-out of electronic unit Thermal cut-out error. If the refrigeration system overloads, or the ambient temperature is too high, the thermal sensor is overheated.E5NTC failure (open circuit)LLNTC failure (short circuit)HH

Solutions
131.If error codes appear on the displayIf error codes appear when the fridge is powered by 12V source, please confirm if the current voltage is stable. The voltage of the car battery may have been unstable when the vehicle was moving. This will activate the battery protection function and error codes will display. Please try to lower the battery protection setting and see if the error is resolved.Please also try to take a voltage reading of your battery to make sure it is not depleted/discharged. If you don't have a tool to measure the voltage, please connect the fridge to 110V source. If the error code still displays, please contact us and provide corresponding videos or pictures which can help us to solve your problems faster.2.The refrigerator is not functioning properlyIf the refrigerator is not functioning properly, please contact us. We will provide you with a return or exchange.

14Warranty & Return Policy630-day money-back guarantee upon receiving.For returns or exchanges, please call us, or fill out the following return and exchange registration form in the package as a proof of return. All materials must be returned in the original condition and packaging. Thank you for your cooperation.If the product is received damaged or defective during transportation, you will need to contact our customer service within 2 business days. Make sure to provide relevant photos or videos, your order ID number, and your name. A customer service agent will help assist into solving the issue at a timely manner (Return, Exchange, or Discount Compensation). A free return label will be provided if needed.5-year warranty on the compressor.1-year warranty for other parts or accessories.

15Troubleshooting (Q & A)71. Heat & Water ResistanceICECO refrigerators are engineered to operate at an ambient temperature of up to 55 °C (131 °F).Heat resistanceICECO refrigerators can operate under light rain conditions. We DO NOT recommend exposing the fridge to moderate or heavy rain.As with all electrical appliances, over-exposure to moisture may shorten the fridges' life. Please keep the vents clear of water, and please add some clearances to the bottom of the fridge, if the ground is wet. Weather Proof

2. Why did it change back to the original temperature after setting the temperature?The Solid/Non-Flashing number on the display is the CURRENT interior temperature. The Flashing number is your SET temperature after adjustment. The compressor will shut off when the SET temperature is reached.3. What should I do if the refrigerator is upside down when it is delivered?Please leave your refrigerator upright for 24 hours to allow the compressor lubricant to resettle before powering on the fridge. Otherwise it may contribute to certain operation abnormalities. If the fridge has any visible oil or fluid leaks, please contact us immediately. 16

17BatteryProtectionCut-out12VCut-in12VCut-out24VCut-in24V(ON SWITCH POSITION)LOW9.610.921.322.7MED10.111.422.323.7HIGH11.112.424.325.7For example, when you switch to a LOW MODE, the battery voltage is lower than 9.6 volts, the refrigerator will automatically power off; When the battery voltage reaches 10.9 volts, the refrigerator will start again.4. What is the function of triple battery protection? How do they work? The triple battery protection is designed to prevent over-discharge and battery depletion. When the measured DC voltage is below the set value, the compressor will shut off to prevent battery depletion.