ICI DURACAM Series User manual

Guide
2105 W. Cardinal Dr. Beaumont, TX 77705
Phone: [phone]
Toll Free: [phone]
infraredcameras.com
suppor[email protected]
We Are IR ™
ICI cameras fall under US Federal Law and Export Control.
DURACAM/TOUGHCAM SERIES
QUICK START GUIDE
Edit Text Outlines
IndustryIndustry

2
©Copyright 2021, Infrared Cameras, Inc. - All rights reserved. The
contents of this document may not be reproduced in whole or in parts
without the written consent of the copyright owner.
Printed in the United States of America.
2105 W. Cardinal Dr.
Beaumont, TX 77705
[phone]
www.infraredcameras.com

THE MANUFACTURER RESERVES THE RIGHT TO ALTER THE
SPECIFICATIONS OF THE PRODUCT WITHOUT PRIOR NOTIFICATION. THE
MANUFACTURER ALLOWS HIMSELF THE RIGHT TO MODIFY WITHOUT
ANY PRELIMINARY OPINION THE TECHNICAL SPECIFICATIONS OF THE
PRODUCT. THIS MANUAL MAY CONTAIN TECHNICAL INACCURACIES OR
TYPOGRAPHICAL ERRORS.
NOTICE ALL STATEMENTS, INFORMATION, AND RECOMMENDATIONS IN
THIS MANUAL ARE BELIEVED TO BE ACCURATE BUT ARE PRESENTED
WITHOUT WARRANTY OF ANY KIND. NOTWITHSTANDING ANY OTHER
WARRANTY HEREIN, ALL DOCUMENT FILES AND SOFTWARE ARE
PROVIDED “AS IS” WITH ALL FAULTS. ICI DISCLAIMS ALL WARRANTIES,
EXPRESSED OR IMPLIED, INCLUDING, WITHOUT LIMITATION, THOSE
OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
NONINFRINGEMENT OR ARISING FROM A COURSE OF DEALING, USAGE,
OR TRADE PRACTICE.
THE SOFTWARE LICENSE AND LIMITED WARRANTY FOR THE
ACCOMPANYING PRODUCT ARE SET FORTH IN THE INFORMATION
PACKET THAT SHIPPED WITH THE PRODUCT AND ARE INCORPORATED
HEREIN BY THIS REFERENCE. IF YOU ARE UNABLE TO LOCATE THE
SOFTWARE LICENSE OR LIMITED WARRANTY, CONTACT YOUR ICI
REPRESENTATIVE FOR A COPY.
IN NO EVENT SHALL ICI BE LIABLE FOR ANY INDIRECT, SPECIAL,
CONSEQUENTIAL, OR INCIDENTAL DAMAGES, INCLUDING, WITHOUT
LIMITATION, LOST PROFITS OR LOSS OR DAMAGE TO DATA ARISING
OUT OF THE USE OR INABILITY TO USE THIS MANUAL, EVEN IF ICI HAS
BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

3
Package Includes
Cam device Micro-USB to USB Cable
ENSURE ALL SYSTEM EQUIPMENT AND COMPONENT ITEMS ARE
PRESENT BEFORE BEGINNING INSTALLATION
Power Cord Power Adapter

4
Set Up
or Mount the fully charged device
to a tripod using the ¼”-20
mount located on the body.
The camera can be used as
handheld devices.
A.
MAKE SURE TRIPODS DO NOT BLOCK THE DIRECT PATH OF
PERSON(S) TO BE IMAGED TO ENSURE THE EQUIPMENT WILL NOT
BE MOVED OR KNOCKED DOWN. USING A DIVIDING BARRIER WILL
HELP KEEP TRIPODS SEPARATE FROM THE PATH.

5
B.
Power on device.
TURN ON THE CAMERA BY PUSHING AND HOLDING THE POWER
BUTTON FOR THREE SECONDS.
PRESS AND HOLD THE POWER BUTTON FOR MORE THAN FIVE
SECONDS TO SHUT DOWN THE CAMERA.
AFTER POWERING OFF, WAIT TEN SECONDS BEFORE POWERING
THE DEVICE ON AGAIN.
THE THERMAL IMAGER NEEDS SUFFICIENT WARM-UP TIME
FOR THE MOST ACCURATE TEMPERATURE MEASUREMENTS
AND BEST IMAGE QUALITY. THIS TIME CAN OFTEN VARY BY
ENVIRONMENTAL CONDITIONS. IT IS BEST TO WAIT A MINIMUM
OF 10 MINUTES FOR THE DEVICE TO COMPLETELY WARM-UP.

6
Battery Installation
A.
C.
B.
D.
Press and hold the battery bay
button and lift upwards to open the
battery bay cover.
Close lid.
To replace a battery held in the
battery bay push the battery
buckle. Battery will be ejected.
Ensure metal contacts are aligned,
then push battery into battery bay.
MAKE SURE TO HOLD THE CAMERA FIRMLY IN BOTH HANDS
WHEN REMOVING OR REPLACING BATTERY OR OPENING THE
BATTERY BAY COVER.
DO NOT FORCE THE BATTERY INTO THE BATTERY BAY. IF USER
FEELS SIGNIFICANT RESISTANCE REMOVE THE BATTERY AND
ENSURE METAL CONTACTS ARE ALIGNED BEFORE TRYING TO
PLACE BATTERY INTO THE BATTERY BAY.

7
Guide
Memory Card
DO NOT FORCE MICRO-SD CARD INTO THE SLOT. THE SIDE OF
THE CARD WITH CONTACT PINS MUST BE INSERTED FIRST. IF
THERE IS RESISTANCE FLIP THE CARD AROUND AND TRY AGAIN.
TO EJECT THE MEMORY CARD PRESS UNTIL A CLICK IS HEARD
AND THEN RELEASE. MEMORY CARD WILL BE EJECTED.
A.
Insert the MicroSD Card into the
side of the DuraCam/ToughCam
until a clicking sound is heard.

8
Charging Instructions
A.
Plug the power adapter jack
into the right side of the
DuraCam/ToughCam device.
B.
Plug the power cord into
the power adapter.
ENSURE THE IMAGER IS NEAR ROOM TEMPERATURE BEFORE
CHARGING THE DEVICE. DO NOT CHARGE IN EXTREMELY HOT OR
COLD AREAS. THE BATTERY CAPACITY MAY BE DECREASED IF
CHARGED IN AN EXTREME TEMPERATURE ENVIRONMENT.

9
C.
Plug power cord into a
110/120V electrical outlet.
IF YOU DO NOT USE THE IMAGER FOR A LONG PERIOD OF TIME,
PUT THE DEVICE IN A COOL AND DRY ENVIRONMENT. THE
BATTERY WILL DISCHARGE OVER TIME; THEREFORE, THE IMAGER
SHOULD BE CHARGED OCCASIONALLY TO PREVENT DAMAGE TO
THE BATTERY OR THE DEVICE.
CHARGE THE BATTERY FOR A MINIMUM OF 3 HOURS BEFORE
USING. ICI DOES NOT RECOMMEND CHARGING THE DEVICE
WHILE IT IS ON A TRIPOD. LAY DEVICE FACE DOWN ON A FLAT
AND STABLE DESK OR TABLE WHILE CHARGING.

10
Infrared Cameras, Inc.
2105 W. Cardinal Dr.
Beaumont, TX 77705
Phone: Toll Free: International: 
General Inquiry: suppor[email protected]
Website: www.infraredcameras.com

ICI manufactures complete systems and software. We can provide complete
engineering, software, and OEM solutions. Our Fortune 500 clients rely on us
for infrared equipment and thermography training (which we offer through the
Infrared Training Institute).
In addition to providing custom germanium, silica, and sapphire optics, we also
build windows for enclosures, as well as custom pan and tilt units. We can even
provide customizable explosion-proof systems.
Our knowledge and experience stems from years of using infrared imaging
and temperature measurement instruments to provide solutions to: managers,
engineers, scientists, inspectors and operators in space, power companies,
medical, pulp and paper, food industry, research and development, and various
process industries. You can see our products and services used in industrial,
commercial, and government applications worldwide. Originally named Texas

Thank you for your dedicated and continued support.
ABOUT ICI / CONTACT