ICON Health & Fitness NordicTrack Vault User manual

USER’S MANUAL
Model No. NTB15019.0
Serial No.
Write the serial number in the space
above for reference.
CAUTION
Read all precautions and
instructions in this manual before
using this equipment. Keep this
manual for future reference.
nordictrack.com
To register your product and
activate your warranty today,
go to my.nordictrack.com.
For service at any time, go to
support.nordictrack.com.
Or call 1-800-TO-BE-FIT
(1-800-862-3348)
Mon.–Fri. 6 a.m.–6 p.m. MT
Sat. 8 a.m.–12 p.m. MT
Please do not contact the store.
REGISTER YOUR
PRODUCT
CUSTOMER CARE
Serial
Number
Decal

2
WARNING DECAL PLACEMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
IMPORTANT PRECAUTIONS..................................................................3
BEFORE YOU BEGIN. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
PART IDENTIFICATION CHART. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
HOW TO USE THE FITNESS MIRROR .........................................................12
FCC INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
MAINTENANCE AND TROUBLESHOOTING.....................................................20
EXERCISE GUIDELINES ....................................................................21
PART LIST ...............................................................................22
EXPLODED DRAWING. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
ORDERING REPLACEMENT PARTS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Back Cover
LIMITED WARRANTY. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Back Cover
TABLE OF CONTENTS
NORDICTRACK and IFIT are registered trademarks of ICON Health & Fitness, Inc. The Bluetooth®word mark
and logos are registered trademarks of Bluetooth SIG, Inc. and are used under license. Google Maps is a
trademark of Google LLC. Wi-Fi is a registered trademark of Wi-Fi Alliance. WPA and WPA2 are trademarks of
Wi-Fi Alliance.
WARNING DECAL PLACEMENT
This drawing shows the location(s) of the warning
decal(s). If a decal is missing or illegible, see
the front cover of this manual and request a
free replacement decal. Apply the decal in the
location shown. Note: The decal(s) may not be
shown at actual size.
(inside cabinet)

3
IMPORTANT PRECAUTIONS
WARNING: To reduce the risk of serious injury, read all important precautions and
instructions in this manual and all warnings on your fitness mirror before using your fitness mirror.
ICON assumes no responsibility for personal injury or property damage sustained by or through the
use of this product.
1. It is the responsibility of the owner to
ensure that all users of the fitness mirror are
adequately informed of all precautions.
2. Before beginning any exercise program,
consult your physician. This is especially
important for persons over age 35 or persons
with pre-existing health problems.
3. The fitness mirror is not intended for use
by persons with reduced physical, sensory,
or mental capabilities or lack of experience
and knowledge, unless they are given super-
vision or instruction about the use of the
fitness mirror by someone responsible for
their safety.
4. Use the fitness mirror only as described in
this manual.
5. The fitness mirror is intended for home use
only. Do not use the fitness mirror in a com-
mercial, rental, or institutional setting.
6. Keep the fitness mirror indoors, away from
moisture and dust. Do not put the fitness
mirror in a garage or covered patio, or near
water.
7. Keep children under age 16 and pets away
from the fitness mirror at all times.
8. Due to its weight and size, moving the fitness
mirror requires two or three persons.
9. Place the fitness mirror on a level surface,
with a mat beneath it to protect the floor
or carpet. Make sure that there is enough
clearance around the fitness mirror for the
exercises that you will do.
10. Inspect and properly tighten all parts
regularly. Replace any worn parts
immediately. Use only manufacturer-supplied
parts.
11. Always plug the power adapter into the
fitness mirror before you plug it into an
outlet.
12. Make sure not to hit the mirror with hand
weights or any other objects. Note: Some
models do not include hand weights.
13. Do not climb on any part of the fitness mirror.
14. Do not place more than 90 lbs. (41 kg) of
weight on each adjustable shelf or adjustable
rack. Do not place more than 2 lbs. (1 kg) of
weight on the fixed shelf or on the hooks.
15. Wear appropriate clothes while exercising;
do not wear loose clothes that could become
caught on the fitness mirror. Always wear
athletic shoes for foot protection.
16. Do not close the door with the mirror facing
inward.
17. Make sure that the door is securely latched
when the fitness mirror is not in use.
18. Over exercising may result in serious injury
or death. If you feel faint, if you become short
of breath, or if you experience pain while
exercising, stop immediately and cool down.

4
STANDARD SERVICE PLANS

5
Congratulations for selecting the revolutionary
NORDICTRACK®VAULT. The VAULT is an innovative
digital fitness mirror with a convenient equipment stor-
age cabinet. The VAULT offers a variety of immersive
and interactive workouts designed to help you achieve
your fitness goals in the comfort of your own home.
For your benefit, read this manual carefully before
you use the fitness mirror. If you have questions after
reading this manual, please see the front cover of this
manual. To help us assist you, note the product model
number and serial number before contacting us. The
model number and the location of the serial number
decal are shown on the front cover of this manual.
Before reading further, please familiarize yourself with
the parts that are labeled in the drawing below.
BEFORE YOU BEGIN
Height: 6 ft. 1 in. (185 cm)
Depth: 1 ft. 2 in. (36 cm)
Width: 2 ft. (61 cm)
Touch Screen/Tablet
Speaker
Power Switch
Hinge
Door
Storage Cabinet
Latch
Fixed Shelf
Adjustable Shelf
Adjustable Small Rack
Adjustable Large Rack
Mirror
Base
Adjustable Large Rack

6
PART IDENTIFICATION CHART
Use the drawings below to identify the small parts needed for assembly. The number in parentheses below each
drawing is the key number of the part, from the PART LIST near the end of this manual. The number following the
key number is the quantity needed for assembly. Note: If a part is not in the hardware kit, check to see if it
has been preassembled. Extra parts may be included.
M4 x 12mm
Screw (32)–8
M5 x 50mm
Lag Screw (35)–2
M8 x 15mm
Screw (31)–1
M6 x 10mm
Screw (34)–2
M8 x 16mm
Screw (30)–4

7
ASSEMBLY
• Assembly requires two persons.
• Place all parts in a cleared area and remove the
packing materials. Do not dispose of the packing
materials until you nish all assembly steps.
• Left parts are marked “L” or “Left” and right parts
are marked “R” or “Right.”
• To identify small parts, see page 6.
• In addition to the included tool(s), assembly
requires the following tool(s):
one Phillips screwdriver
one rubber mallet
Assembly may be easier if you have a set of
wrenches. To avoid damaging parts, do not use
power tools.
1. To use the assembly steps in this manual, first see the helpful tips below.

8
2
2. Locate the four holes in the Base (6), and then
locate the front edge (A) and the rear edge (B) of
the Base; the holes are closer to the rear edge.
Tip: Avoid scratching the Base (6). With the
help of a second person, set the Cabinet (1) on
the Base as shown. Attach the Cabinet with four
M8 x 16mm Screws (30); start all the Screws,
and then tighten them.
1
6
A
30
30
B
Avoid
scratching
the Base (6)

9
3
3. Tip: Avoid damaging the mirror. With the help
of a second person, orient the Door (3) so that
the speakers (C) are at the bottom.
Have a second person hold the Door (3) until
you complete assembly step 5.
See the inset drawing. Identify the Upper
Bracket (15) and the Lower Bracket (16).
Attach the Upper Bracket (15) to the back of the
Door (3) with four M4 x 12mm Screws (32); start
all the Screws, and then tighten them.
15
32
3
Avoid damaging
the mirror
C
15
16

10
21
16
3
7
5
5. See the inset drawing. Locate the Screw
Bushing (18) at the bottom of the Hinge (7).
Apply a generous amount of grease to the Screw
Bushing.
Next, slide the Lower Bracket (16) onto the
bottom of the Hinge (7) as shown and hold it in
place.
Then, attach the Lower Bracket (16) to the Door
(3) with four M4 x 12mm Screws (32); start all
the Screws, and then tighten them.
Next, plug the Hinge Wire (21) into the receptacle
in the back of the Door (3).
See assembly step 4. Tighten the M8 x 15mm
Screw (31) enough that you can open and close
the Door easily, but the Door does not move on
its own when it is at rest.
32
16
7
18
4
4. Locate the Pin Bushing (25). Using a plastic
bag to keep your fingers clean, apply a gener-
ous amount of the included grease to the Pin
Bushing.
Orient the Pin Bushing (25) as shown and slide it
onto the top of the Hinge (7).
Tip: Avoid pinching the Hinge Wire (21) and
avoid damaging the mirror. With the help of a
second person, hang the Upper Bracket (15) on
the top of the Hinge (7).
Then, tighten the M8 x 15mm Screw (31) a few
turns into the Upper Bracket (15); do not fully
tighten the Screw. 31
25
15
7
21
Avoid pinching the Hinge
Wire (21) and avoid
damaging the mirror
Grease
Grease

11
6
6. With the help of a second person, move the
fitness mirror to the location where it will be
used.
Secure the fitness mirror to a wall stud with the
included Tether (19) as described below.
Attach the Tether (19) to the back of the Cabinet
(1) with two M6 x 10mm Screws (34).
Next, attach the bracket on the other end of the
Tether (19) to a wall stud with two M5 x 50mm
Lag Screws (35). Then, tighten the Tether to the
appropriate length.
8. After the fitness mirror is assembled, inspect it to make sure that it is assembled correctly. Make sure
that all parts are properly tightened before you use the fitness mirror. Extra parts may be included. Place
a mat beneath the fitness mirror to protect the floor. Remove the protective film from the mirror.
To register your product and activate your warranty today, go to my.nordictrack.com.
7. IMPORTANT: Always plug the Power
Adapter (23) into the fitness mirror before
you plug it into an outlet.
Plug the Power Adapter (23) into the receptacle
on the back of the Cabinet (1).
To plug the Power Adapter (23) into an outlet,
see HOW TO PLUG IN THE POWER ADAPTER
on page 12.
To install Shelves and/or Racks (not shown) in
the Cabinet (1), see HOW TO ADJUST THE
SHELVES AND RACKS on page 12.
19
1
1
34
35
23
7

12
HOW TO PLUG IN THE POWER ADAPTER
IMPORTANT: If the fitness mirror has been exposed
to cold temperatures, allow it to warm to room tem-
perature before you plug in the power adapter (A).
If you do not do this, you may damage the tablet
displays or other electronic components.
IMPORTANT: Always plug the power adapter (A)
into the fitness mirror before you plug it into an
outlet.
Plug the power
adapter (A) into
the receptacle
on the fitness
mirror (see
assembly step 7
on page 11).
Then, plug the
power adapter
into an appropri-
ate outlet that is properly installed in accordance with
all local codes and ordinances.
HOW TO USE THE LATCH
Make sure that
the door is
securely latched
when the fitness
mirror is not
in use. To latch
the door, simply
pivot the latch
(B) on the top of
the cabinet until
it catches the
screw (C) in the
top of the door.
HOW TO ADJUST THE SHELVES AND RACKS
Depending on the model, a variety of shelves and
racks are included with the fitness mirror.
To adjust the
shelves (D) and
racks (E, F) in
the cabinet, first
open the door
and remove the
shelves, racks,
and hangers (G)
that are already
installed, if nec-
essary. It may
be helpful to use
a rubber mallet
to remove the
hangers.
Counting from
the top or the
bottom of the
cabinet, insert
a left hanger
(G) and a right
hanger (not
shown) into the
desired adjust-
ment holes (H).
Make sure that
the left and right
hangers are
set at the same
height.
Then, press a shelf (D) or a rack (E, F) firmly into place
over the hangers (G); it may be helpful to use a rubber
mallet. Orient a shelf so that the tabs face downward
and the lip faces upward at the front; orient a slotted
shelf so that the slots face outward and the lip faces
upward at the front.
Repeat this process to attach as many shelves (D)
and/or racks (E, F) as desired.
A
B
C
D
E
G
G
F
F
G
G
H
H
HOW TO USE THE FITNESS MIRROR

13
HOW TO ORDER OPTIONAL FITNESS EQUIPMENT
A variety of optional fitness equipment, such as dumb-
bells, kettlebells, yoga mats, and resistance bands, is
available. To purchase optional fitness equipment,
please see the front cover of this manual.
Note: Fitness equipment is included with some models
of the fitness mirror. You can also use your own fitness
equipment with the fitness mirror.
FEATURES OF THE TABLET
The advanced tablet built into the tness mirror offers
an array of features designed to make your workouts
more effective and enjoyable.
The tablet features iFit technology. With iFit, you can
access a large and varied workout library and track
your workout results. Each iFit workout guides you
through an immersive and effective exercise session.
While you exercise, the tablet will display continuous
exercise feedback. You can even measure your heart
rate using a compatible heart rate monitor.
To turn on and turn off the tablet, see this page. To
learn how to use the touch screen, see page 14.
To set up the tablet, see page 14.
HOW TO TURN ON THE TABLET
The included power adapter must be used to oper-
ate the fitness mirror. See HOW TO PLUG IN THE
POWER ADAPTER on page 12.
When the
power adapter
is plugged in,
press the power
switch (I) located
on the rear of
the fitness mirror
to turn on the
tablet. It will take
a moment for the
fitness mirror to
be ready for use.
If the tablet is
inactive and the
screen is dark,
simply touch
the screen to
activate the
tablet.
HOW TO TURN OFF THE TABLET
If the tablet is not in use, after a few minutes the tablet
will become inactive and the screen will turn dark.
When you are finished exercising, press the power
switch and unplug the power adapter. IMPORTANT: If
you do not do this, the electrical components on
the fitness mirror may wear prematurely.
I
I

14
HOW TO USE THE TOUCH SCREEN
The tablet features a full-color touch screen. The fol-
lowing information will help you use the touch screen:
• The tablet functions similarly to other tablets. You
can slide or flick your finger against the screen to
move certain images on the screen, such as the
displays in a workout.
• To type information into a text box, first touch the text
box to view the keyboard. To use numbers or other
characters on the keyboard, touch ?123. To view
more characters, touch ~[<. Touch ?123 again to
return to the number keyboard. To return to the letter
keyboard, touch ABC. To use a capital character,
touch the shift button (upward-facing arrow symbol).
To use multiple capital characters, touch the shift
button again. To return to the lowercase keyboard,
touch the shift button a third time. To clear the last
character, touch the clear button (backward-facing
arrow with an X symbol).
HOW TO SET UP THE TABLET
Before you use the fitness mirror for the first time, set
up the tablet.
1. Connect to your wireless network.
To use iFit workouts, the tablet must be connected
to a wireless network. Follow the prompts on
the screen to connect the tablet to your wireless
network.
2. Customize settings.
Follow the prompts on the screen to set the desired
settings, such as the desired unit of measurement
and your time zone.
Note: To change these settings later, see HOW TO
CHANGE TABLET SETTINGS on page 17.
3. Log into or create an iFit account.
Follow the prompts on the screen to log into your
iFit account or to create an iFit account.
4. Check for firmware updates.
First, touch the menu button (three horizontal lines
symbol), touch Settings, touch Maintenance, and
then touch Update. The tablet will check for firm-
ware updates. For more information, see HOW TO
CHANGE TABLET SETTINGS on page 17.
The tablet is now ready for you to begin working out.
The following pages explain how to use the iFit work-
outs that the tablet offers.
To work out with the tablet, see page 15. To
change tablet settings, see page 17. To connect
to a wireless network, see page 18. To connect
your headphones with Bluetooth, see page 19.
Note: If there is a sheet of plastic on the screen,
remove the plastic.

15
HOW TO WORK OUT WITH THE TABLET
To use the tablet, you must be logged into your iFit
account (see step 2 below) and the tablet must be con-
nected to a wireless network (see HOW TO CONNECT
TO A WIRELESS NETWORK on page 18).
1. Touch the screen to turn on the tablet.
See HOW TO TURN ON THE TABLET on
page 13. Note: It may take a few moments for
the tablet to be ready for use.
2. Log in to your iFit account.
Follow the prompts on the screen to enter your
username and password.
Note: To switch users within your iFit account,
touch the menu button, touch Settings, and then
touch Manage Accounts. If more than one user
is associated with the account, a list of users will
appear. Touch the name of the desired user.
3. Select an iFit workout from the home screen or
the workout library.
Touch the buttons at the bottom of the screen to
select either the home screen (Home button) or the
workout library (Browse button).
To select an iFit workout from the home screen or
the workout library, simply touch the desired work-
out button on the screen. Slide or flick the screen to
scroll upward or downward if necessary.
The featured iFit workouts shown on the home
screen will change periodically.
The workout library contains all of the iFit workouts
available for your fitness mirror, organized into
categories. To search the workout library, touch
the search button (magnifying glass symbol), and
select the desired filtering options.
When you select an iFit workout, the screen will
show an overview of the workout that includes
details such as the duration of the workout and
the approximate number of calories you will burn
during the workout. If desired, you can select
options such as adding the workout to your sched-
ule (see step 5) or marking the workout as a
favorite (see step 6).
4. Start the iFit workout and follow your progress.
Touch Start Workout to start the iFit workout.
An iFit coach will guide you through an immersive
video workout. Touch the screen in any open space
to view and select music, trainer voice, and volume
options for the workout.
The tablet offers several display modes. The
display mode that you select will determine which
workout information is shown.
Drag upward on the screen to enter the fullscreen
display mode. Drag downward on the screen to
view the workout information displays.
Touch the various workout information displays
to view more options. Touch the more button
(+ symbol) to view statistics or charts. Touch the
center of the screen to view even more display
mode options.
To pause the workout, simply touch the screen. To
continue the workout, simply touch the option to
resume.
To end the workout, touch the screen to pause the
workout, and then follow the prompts on the screen
to end the workout and return to the home screen.
When the workout ends, a workout summary
will appear on the screen. If desired, you can
select options such as adding the workout to your
schedule (see step 5) or adding the workout to
your favorites list (see step 6). Then, touch Save
Workout to return to the home screen.

16
5. Schedule an iFit workout on the calendar if
desired.
If desired, you can schedule an iFit workout for
a future date. Simply view the overview or work-
out summary of the desired iFit workout, touch
Schedule, and then select the desired date on the
calendar.
When the selected date arrives, the iFit work-
out that you scheduled will appear on the home
screen.
6. Create a list of favorite iFit workouts if desired.
To mark an iFit workout as a favorite, simply view
the overview or workout summary of the desired
iFit workout and touch the favorites button (heart
symbol).
To view a list of iFit workouts that you have
marked as your favorites, select the workout library
(Browse button), and then touch My Favorites.
7. Wear a compatible heart rate monitor and
measure your heart rate if desired.
You can wear a compatible heart rate monitor
to measure your heart rate. Note: The tablet is
compatible with all Bluetooth®Smart heart rate
monitors.
See page 19 for information about ordering
an optional compatible heart rate monitor.
The tablet will connect to your compatible heart
rate monitor automatically. When your heartbeat is
detected, your heart rate will be shown.
8. When you are finished exercising, turn off the
tablet.
See HOW TO TURN OFF THE TABLET on
page 13.

17
HOW TO CHANGE TABLET SETTINGS
IMPORTANT: Some of the settings and features
described may not be enabled. Occasionally, a firm-
ware update may cause your tablet to function slightly
differently.
1. Select the settings main menu.
First, turn on the tablet (see HOW TO TURN ON
THE TABLET on page 13). Note: It may take a
few moments for the tablet to be ready for use.
Next, select the home screen (Home button). When
you turn on the tablet, the home screen will appear
on the screen after the tablet boots up. If you are in
a workout, touch the screen and follow the prompts
to end the workout and return to the home screen.
If you are in the settings menus, touch the back
button (arrow symbol) and then touch the close
button (x symbol) to return to the home screen.
Then, touch the menu button (three horizontal lines
symbol) on the screen, and then touch Settings.
The settings main menu will appear on the screen.
2. Navigate the settings menus and change
settings as desired.
Slide or flick the screen to scroll upward or down-
ward if necessary. To view a settings menu, simply
touch the menu name. To exit a menu, touch the
back button (arrow symbol). You may be able to
view and change settings in the following settings
menus:
Account
• My Prole
• In Workout
• Manage Accounts
Equipment
• Equipment Info
• Equipment Settings
• Maintenance
• Wi-Fi
About
• Legal
3. Customize workout settings.
To customize workout settings, touch In Workout,
and then touch the desired settings.
4. Customize the unit of measurement and other
settings.
To customize the unit of measurement, the time
zone, or other settings, touch Equipment Info or
Equipment Settings, and then touch the desired
settings.
5. View machine information or tablet app
information.
Touch Equipment Info, and then touch Machine
Info or App Info to view information about your
fitness mirror or about the tablet app.
6. Update the tablet firmware.
For the best results, regularly check for
firmware updates. Touch Maintenance, and then
touch Update to check for firmware updates using
your wireless network. The update will begin auto-
matically. IMPORTANT: To avoid damaging the
fitness mirror, do not press the power switch or
unplug the power adapter while the firmware is
being updated.
The screen will show the progress of the update.
When the update is complete, the fitness mirror will
turn off and then turn back on. If it does not, press
the power switch, unplug the power adapter, and
wait for several seconds. Then, plug the power
adapter in again and press the power switch.
Note: It may take a few moments for the tablet to
be ready for use.
Note: Occasionally, a firmware update may cause
the tablet to function slightly differently. These
updates are always designed to improve your
exercise experience.
7. Exit the settings main menu.
If you are in a settings menu, touch the back but-
ton. Then, touch the close button (x symbol) to exit
the settings main menu.

18
HOW TO CONNECT TO A WIRELESS NETWORK
To use iFit workouts and to use several other features
of the tablet, the tablet must be connected to a wireless
network.
1. Select the home screen.
First, turn on the tablet (see HOW TO TURN ON
THE TABLET on page 13). Note: It may take a
few moments for the tablet to be ready for use.
Next, select the home screen (Home button). When
you turn on the tablet, the home screen will appear
on the screen after the tablet boots up. If you are in
a workout, touch the screen and follow the prompts
to end the workout and return to the home screen.
If you are in the settings menus, touch the back
button (arrow symbol) and then touch the close
button (x symbol) to return to the home screen.
2. Select the wireless network menu.
Touch the menu button (three horizontal lines
symbol), and then touch Wi-Fi to select the wire-
less network menu.
3. Enable Wi-Fi.
Make sure that Wi-Fi®is enabled. If it is not
enabled, touch the Wi-Fi toggle to enable it.
4. Set up and manage a wireless network
connection.
When Wi-Fi is enabled, the screen will show a
list of available networks. Note: It may take a few
moments for the list of wireless networks to appear.
Note: You must have your own wireless network
and an 802.11b/g/n router with SSID broadcast
enabled (hidden networks are not supported).
When a list of networks appears, touch the desired
network. Note: You will need to know your network
name (SSID). If your network has a password, you
will also need to know the password.
Follow the prompts on the screen to enter your
password and connect to the selected wireless
network. (To use the keyboard, see HOW TO USE
THE TOUCH SCREEN on page 14.)
When the tablet is connected to your wireless net-
work, a checkmark will appear next to the wireless
network name.
If you are having problems connecting to an
encrypted network, make sure that your password
is correct. Note: Passwords are case-sensitive.
Note: The tablet supports unsecured and secured
(WEP, WPA™, and WPA2™) encryption. A broad-
band connection is recommended; performance
depends on connection speed.
Note: If you have questions after following
these instructions, go to support.iFit.com for
assistance.
5. Exit the wireless network menu.
To exit the wireless network menu, touch the back
button (arrow symbol).

19
HOW TO CONNECT YOUR HEADPHONES WITH
BLUETOOTH
If the tablet is enabled with this feature, you can
connect your Bluetooth-compatible headphones to lis-
ten to audio from the tablet through your headphones.
To connect your headphones to the tablet, first turn
on your headphones and place them near the tablet.
Next, select an iFit workout (see page 15). Then,
touch Connect Bluetooth Headphones when this option
appears on the screen.
To pair your headphones to the tablet, select your
headphones from the list on the screen. When your
headphones and the tablet pair successfully, the audio
from the tablet will play through your headphones.
THE OPTIONAL HEART RATE MONITOR
Whether your
goal is to
burn fat or to
strengthen your
cardiovascular
system, the key
to achieving the
best results is
to maintain the
proper heart
rate during your
workouts. The optional heart rate monitor will enable
you to continuously monitor your heart rate while you
exercise, helping you to reach your personal fitness
goals. To purchase a heart rate monitor, please see
the front cover of this manual.
Note: The tablet is compatible with all Bluetooth Smart
heart rate monitors.
FCC INFORMATION
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment off
and on, try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
FCC CAUTION: To assure continued compliance, use only shielded interface cables when connecting to
computer or peripheral devices. Changes or modifications not expressly approved by the party respon-
sible for compliance could void the user’s authority to operate this equipment.
IMPORTANT: To satisfy exposure compliance requirements, the antenna and transmitter in the tablet
must be at least 8 in. (20 cm) from all persons and must not be near or connected to any other antenna or
transmitter.
Note: The tablet contains FCC ID: OMC420612.

20
MAINTENANCE
Regular maintenance is important for optimal per-
formance and to reduce wear. Inspect and properly
tighten all parts each time the fitness mirror is used.
Replace any worn parts immediately. Use only manu-
facturer-supplied parts.
To clean the fitness mirror, use a damp cloth and
a small amount of mild soap or glass cleaner.
IMPORTANT: To avoid damage to the fitness mirror,
keep liquids away from the fitness mirror and keep
the fitness mirror out of direct sunlight.
TABLET TROUBLESHOOTING
If the tablet does not turn on, make sure that the power
adapter is fully plugged in and that the power switch is
pressed on.
If a replacement power adapter is needed, call the
telephone number on the cover of this manual.
IMPORTANT: To avoid damaging the tablet, use
only a manufacturer-supplied regulated power
adapter.
For the best results, regularly check for firmware
updates (see HOW TO CHANGE TABLET SETTINGS
on page 17).
If you are having problems connecting the tablet to
a wireless network, or if you are having problems
with your iFit account or iFit workouts, go to
support.iFit.com.
If the tablet does not boot up properly, or if the tablet
freezes and does not respond, reset the tablet to the
factory default settings. IMPORTANT: Doing this will
erase all custom settings
you have made to the
tablet. Resetting the tablet
requires two people. First,
press the power switch and
unplug the power adapter.
Next, locate the small reset opening (A) on the back
of the tablet. Using a bent paper clip, press and hold
the reset button inside the opening, and have a sec-
ond person plug in the power adapter and press the
power switch. Continue holding the reset button until
the tablet turns on. When the reset operation is com-
plete, the tablet will turn off and then turn back on. If
it does not, unplug the power adapter and then plug it
in again. Once the tablet turns on, check for rmware
updates (see HOW TO CHANGE TABLET SETTINGS
on page 17). Note: It may take a few moments for
the tablet to be ready for use.
HOW TO ADJUST THE DOOR AND THE HINGE
If the door does not move easily, or if the door moves
too freely, the upper bracket on the hinge needs to be
adjusted.
See the EXPLODED DRAWING on page 23.
Locate the Upper Bracket (15) on the Hinge (7).
Loosen or tighten the M8 x 15mm Screw (31) in the
Upper Bracket until the Door (3) moves as desired.
If the hinge does not move easily, or if the hinge
moves too freely, the lower bracket in the cabinet
needs to be adjusted.
See the EXPLODED DRAWING on page 23.
Locate the M8 x 15mm Screw (31) in the bracket in
lower right side of the Cabinet (1). Loosen or tighten
the Screw until the Hinge (7) moves as desired.
MAINTENANCE AND TROUBLESHOOTING
A