ICP DAS USA WP-5231 User manual

E-mail: [email protected]
1
WP-5231 Quick Start
Version 1.0.0, January 2015
What’s in the Box?
In addition to this guide, the package includes the following items:
WP-5231
A microSD card and a
micro SD/SD adapter
Software
Utility CD
Screw Driver
(1C016) 2.4 mm
GSM/GPRS Antenna (ANT‐421‐02)
(for 3GWA series only)
Technical Support
WP-5231 User Manual
CD:\WinPAC_AM335x\Wp-5231\Document\
http://ftp.icpdas.com/pub/cd/winpac_am335x/wp-5231/document/
1
Configuring the Boot Mode
Before starting any installation, be sure
that the switch is placed in the “0” position.
WP-5231 Quick Start

E-mail: [email protected]
2
WP-5231 Quick Start
2
Connecting to PC, Monitor and Power Supply
i. Connect the mouse or keyboard to the USB port.
ii. Connect PC to the Ethernet port through an Ethernet switch .
iii. Connect the power supply (+12 to +48 VDC) to PWR and GND
terminals.
iv. Connect the monitor to the VGA port.
v. Turn on the WinPAC
3
Using PAC Utility to Manage the WinPAC
Step 1: Double-click the PAC Utility shortcut on the desktop

E-mail: [email protected]
3
WP-5231 Quick Start
Step 2: Configure IP address (DHCP), FTP Server, Auto Execution
files…, etc
Step 3: Reboot the WinPAC for changes to take effect
4
Changing the User Interface Language
Step 1: Click Start menu, point to Settings, click Control Panel, and
then click Regional Settings

E-mail: [email protected]
4
WP-5231 Quick Start
Step 2: Click User Interface Language tab, choose to your local
language, and then click OK
Step 3: Run the PAC Utility,
and then reboot the
WinPAC for changes
to take effect
5
Inserting and Wiring to the XV-Board
XV-Board expansion I/O modules are
used to expand the functions of the
WP-5231.
For more information on how to install
the XV-Board, please refer to section
“2.2. Installing the XV-Board”in
“WP-5231 User Manual”
For more details about XV-Board
expansion I/O modules, please refer to
http://www.icpdas.com/root/product/solutions/hmi_touch_moni
tor/touchpad/xv-board_selection.html