ICP DAS USA GW-2139M User manual

Technical support：servi[email protected] P1
GW-2139M Quick Start
v1.0, February 2019
What’s in the box?
In addition to this guide, the package includes the following items:
GW-2139M
Screw Driver
(1C016)
Technical Support
GW-2139M User Manual：
http://ftp.icpdas.com.tw/pub/cd/fieldbus_cd/BACnet/gateway/
gw-2139m/Manual/
GW-2139M Official Website：
http://www.icpdas.com/root/product/solutions/industrial_com
munication/fieldbus/bacnet_ip/gateway/gw-2139m.html

Technical support：servi[email protected] P2
1 Appearance
2 Pin assignments
Pin Name
Description
F.G.
Power
+10 ~ +30 VDC
P.GND
PWR
D+
RS-485
D-
GND
RS-232
(Debug port)
RxD
TxD
INIT
Connect to GND,
Change to Initial Mode
FW
Connect to GND,
Change to Bootloader Mode
LED Indicator
Ethernet Port
Terminal Block

Technical support：servi[email protected] P3
3 LED Indicator
LED Name
GW-2139M Status
LED Status
ALL LEDs
FW Updating Mode
LED will be twinkled sequentially.
FW Initial Mode
LED will be twinkled per 500ms.
PWR
(Module)
Power On
On
Power Failure
Off
NET
(MSTP)
Connect at least
one device
On
No devices are
connected
Blink per 200 ms
STA
(MSTP)
Connect all device
On
Some devices are
not connected
Blink per 200 ms
CNT
(Modbus)
Connected by least
one client.
On
No clients connect
Blink per 200 ms
RxD
(Modbus)
Data reception
On
No Data reception
Off
TxD
(Modbus)
Data transmission
On
No Data reception
Off
STA
NET
PWR
TxD
RxD
CNT

Technical support：servi[email protected] P4
4 Network Connection
If the GW-2139M and PC in different network domain, please
change the PC's IP address, or use the following software to
modify the GW-2139M IP address.
- eSearch Utility
http://ftp.icpdas.com/pub/cd/tinymodules/napdos/software/esearch/
5 Configuration Tool
ICP DAS provides a configuration Tool to set device.(GW-2139M Utility).
GW-2139M Utility provide mapping table function. It let device’s BACnet
object properties mapping configured via Modbus register.
The factory default IP address of the device is 192.168.255.1.
About the more detail information for the GW-2139M module, please
refer to the user’s manual.
GW-2139M Factory Defaults & Initial Mode
Network
communication
IP
192.168.255.1
Please follow your case
to modify the network
settings.
Mask
255.255.0.0
Gateway
192.168.0.1