ICP DAS USA GTM-201-USB Instruction manual

GTM-201-USB Quick Start
GTM-201-USB Ver 1.00
1
Industrial Quad-band GPRS/GSM Modem
GTM-201-USB
Quick Start Manual
Package Checklist
The package includes the following items:
zOne GTM-201-USB hardware module
zOne Quick Start Manual (this manual)
zOne companion CD
zOne USB Type A to Type B connector cable (CA-USB18)
zOne GPRS antenna
Related Documents and Software Utilities
Documents
zUser manual: GTM-201_User_Manual
zQuick Start Manual: GTM-201-USB_QuickStart_Manual
zCD: \napdos\GPRS_GSM_Modem\GTM-201_Modem\Manual
zhttp://ftp.icpdas.com/pub/cd/usbcd/napdos/gprs_gsm_modem/
gtm-201_modem/manual/
¾View of the GTM-201-USB Panel
www.ipc2u.ru www.icp-das.ru
www.ipc2u.de www.ipc2u.com

GTM-201-USB Quick Start
Pin Assignments
RST+
RESET RST-
Frame Ground F.G.
DC.GNDPower Input:
+10 ~ 30VDC DC.+VS
¾Reset Wire Connection
Input Type Reset State ON Reset State OFF
Reset
Input
Reset Input
ON Voltage Level +3.5 VDC ~ +30 VDC
OFF Voltage Level +1 VDC max.
GTM-201-USB Ver 1.00
2
www.ipc2u.ru www.icp-das.ru
www.ipc2u.de www.ipc2u.com

GTM-201-USB Quick Start
¾Connect the GTM-201-USB to power and PC
¾SIM card and Antenna Installation
GTM-201-USB Ver 1.00
3
SIM Card
www.ipc2u.ru www.icp-das.ru
www.ipc2u.de www.ipc2u.com

GTM-201-USB Quick Start
¾USB Driver Installation(XP)
GTM-201-USB Ver 1.00
4
Step1. Connect the GTM-201-USB and
XPAC hardware with the USB cable , then
power on.
Step2. If pop up a new window that
“Found New Hardware Wizard”, please
select “Cancel”
Step3. Double-click GTM-201-USB driver
that “GTM-201-USB_v1.00.exe”.
Step4. Select “Next” →Select install
folder →Select “Next”
Step5. If the installation process has
popped up new window that “Software
Installation” , please select “Continue
Anyway”
Step5. Select “Install”
Step6. Please open “Device Manager” to
check com port (GTM-201-USB (COMx)).
www.ipc2u.ru www.icp-das.ru
www.ipc2u.de www.ipc2u.com

GTM-201-USB Quick Start
¾Quick Test
(Hyper Terminal)
Step2. Please refer to the following settings
Step1. Start →All Programs →
Bits per second 115200
Data bits 8
Parity None
Stop bits 1
Flow control None
Accessories →Communications →
Hyper Terminal →Input new connection
name →Click “OK” →Select your PC
serial port →Click “OK”
Step3. File →Properties →Settings →
Click “ASCII Setup…” →Select “Echo
typed character locally” →OK
Step4. Input “AT” and press “Enter”, then
you will receive “AT OK”
¾Create a new modem
connection on PC
Step1. Control Panel →Double-click
“Phone and Modem Options” →Modem
→Click “Add”
Step2. Select ”Standard Modem Types” →
Select “Standard 19200 bps Modem” →
Click “Next”
Step3. Select your COM Port to connect
the modem →Click “Next”→Click”Finish”
Step4. Control Panel →Double-click
“Phone and Modem Options” →Modem
→Select “Standard 19200 bps Modem”
→Click “Properties”
GTM-201-USB Ver 1.00
5
www.ipc2u.ru www.icp-das.ru
www.ipc2u.de www.ipc2u.com

GTM-201-USB Quick Start
Step5. Control Panel →Double-click
“Phone and Modem Options” →Modem
→Select “Standard 19200 bps Modem”
→Click “Properties” →Modem →
Maximum Port Speed →115200
Step7. Diagnostics →Query Modem →
Click “OK”
Note: If user queries modem that gets a
Error, please try again.
Step6. Advanced →Extra initialization
commands:
Note: GPRS’s APN must be provided from
your Telecom. CO., LTD.
For example in Taiwan:
AT+CGDCONT=1,”IP”,”INTERNET”
For example in China:
AT+CGDCONT=1,”IP”,” CMNET”
Step8. Click “OK”
GTM-201-USB Ver 1.00
6
www.ipc2u.ru www.icp-das.ru
www.ipc2u.de www.ipc2u.com

GTM-201-USB Quick Start
¾Create a new dial-up on a
PC
Step2. Select “Connect using a dial-up
modem” →Click “Next”
Step1. Control Panel →Network
Connections →Click “Create a new
connection” →Click “Next” →Select
“Connect to the Internet” →Click “Next”
Step4. GPRS’s User name and GPRS’s
Password →Click “Next” →Click
“Finish”
Step3. Your GPRS’s name →Click “Next”
→Phone Number: →Click “Next”
Note: Phone Number must be provided
from your Telecom. CO., LTD.
For example in Taiwan: *99***1#
Note: GPRS’s User name and GPRS’s
Password must be provided from
your Telecom. CO., LTD.
GTM-201-USB Ver 1.00
7
www.ipc2u.ru www.icp-das.ru
www.ipc2u.de www.ipc2u.com

GTM-201-USB Quick Start
Step6.Maximum speed(bps) →
Select ”115200” →
Enable hardware flow control (Note)
→Click “OK”
Note：
GTM-201-RS232
“RTS/CTS”
mode
Please select
“Enable
hardware flow
control”
GTM-201-USB Please don’t
select “Enable
hardware flow
control”
Step5. Contral Panel →
Network Connections →
Click “Your GPRS’s name” →File
→Properties →General →
Select ”Standard 19200 bps Modem”
→Click “Configure”
Step8. If you connect to internet
successfully, your toolbar have
new logo
Step7. Contral Panel →Network
Connections →Double-Click “Your
GPRS’s name” →Click “Dial”
¾Technical Support
1. ICP DAS Service : [email protected]
2. GTM-201-USB software Website:
http://www.icpdas.com./products/GSM_GPRS/wireless/
GTM-201.htm
GTM-201-USB Ver 1.00
8
www.ipc2u.ru www.icp-das.ru
www.ipc2u.de www.ipc2u.com