ICP DAS USA ZT-USBC User manual

ZT-USBC Linux User Manual (Ver.1.0, NOV.2015) ----1
ZT-USBC
Linux User Manual
Warranty
All products manufactured by ICP DAS are warranted against
defective materials for a period of one year from the date of
delivery to the original purchaser.
Warning
ICP DAS assume no liability for damages consequent to the
use of this product. ICP DAS reserves the right to change this
manual at any time without notice. The information furnished by
ICP DAS is believed to be accurate and reliable. However, no
responsibility is assumed by ICP DAS for its use, nor for any
infringements of patents or other rights of third parties resulting
from its use.
Copyright
Copyright 2015 by ICP DAS. All rights are reserved.
Trademark
The names used for identification only may be registered
trademarks of their respective companies.

ZT-USBC Linux User Manual (Ver.1.0, NOV.2015) ----2
Tables of Contents
1. ZT-USBC Linux Driver Installation ........................................................... 3
1.1 L INUX D RIVER I NSTALLING P ROCEDURE .....................................................................................3
1.2 L INUX D RIVER U NINSTALLING P ROCEDURE ................................................................................4

ZT-USBC Linux User Manual (Ver.1.0, NOV.2015) ----3
1. ZT-USBC Linux Driver Installation
The ZT-USBC can be used in Linux OS. For Linux O.S, the recommended
installation and uninstall steps are given in Sec 1.1 ~ 1.2
1.1 Linux Driver Installing Procedure
Linux PC or ICP DAS LinPAC
Type below command to install linux driver
ZT-USBC module (Please refer to Figure 1-1):
#modprobe ftdi_sio
#echo 1b5c 0210 > /sys/bus/usb-serial/drivers/ftdi_sio/new_id
Figure 1-1
Type command “dmesg” to check ZT-USBC device file(Please
refer to Figure 1-2)
#dmesg

ZT-USBC Linux User Manual (Ver.1.0, NOV.2015) ----4
1.2 Linux Driver Uninstalling Procedure
Linux PC or ICP DAS LinPAC
Type below command to remove ZT-USBC Linux driver
#modprobe –r ftdi_sio
or
#rmmod ftdi_sio