ICP DAS USA WLS-R01 User manual

Version 1.0.0
Page 1
Copyright © 2016 by ICP DAS Co., Ltd. All ights eserved.
WLS-R01
Quick Start
1 What’s in the Shipping Package?
The shipping package contains the following items:
2 Preparing the Device
1. Refer the chapter 3. to configure the DIP switch and rotary switch of
W S-R01 module.
2. Power Supply：+10 ~ +30V
DC
If any of these items are missing or damaged, please contact your local
distributor for more information. Save the shipping materials and cartons in
case you need to ship the module in the future.
+Vs GND +Vs
GND
Quick Start
WLS-R01 module
+
0 dBi antenna
(ANT-104-01)
Pla tic tent group
(4SI11G0000009)

Version 1.0.0
Page 2
Copyright © 2016 by ICP DAS Co., Ltd. All ights eserved.
3 DIP Switch, otation Switch and LED
The configuration of W S-R01 can be adjusted by using the
external rotary switches and the DIP switches. The W S-R01 device
should only be rebooted once the configuration is complete.
Rotation switch description：
1. 400M RF channel，the ranges are 0x00 to 0x0F. W S-R01 can
communicate with RFU-400 in same 400M RF channel.
0: 429.8125 1: 429.8250 2: 429.8375 3: 429.8500
4: 429.8625 5: 429.8750 6: 429.8875 7: 429.9000
8: 429.9125 9: 429.9250 A: 429.1750 B: 429.1875
RF
Channel
( MHz )
C: 429.2000 D: 429.2125 E: 429.2250 F: 429.2375
2. 2.4G RF channel，the ranges are 0x00 to 0x0F. W S-R01 can
communicate with W S-T01 in same 2.4G RF channel.
0: 2405 1: 2410 2: 2415 3: 2420
4: 2425 5: 2430 6: 2435 7: 2440
8: 2445 9: 2450 A: 2455 B: 2460
RF
Channel
( MHz )
C: 2465 D: 2470 E: 2475 F: 2480
1 2 3 4 5 6 7 8 9 10 11 12
ON
400M
RF Channel
2.4G
RF Channel
400M
Node ID
400M
Group ID
Filter
SB
MSB

Version 1.0.0
Page 3
Copyright © 2016 by ICP DAS Co., Ltd. All ights eserved.
DIP switch description：
Number Name Statu Value
Description
OFF -----
1 ON 0x01
OFF -----
2 ON 0x02
OFF -----
3 ON 0x04
OFF -----
4 ON 0x08
OFF -----
5 ON 0x10
OFF -----
6 ON 0x20
OFF -----
7 ON 0x40
OFF -----
8
400M
Node ID
ON 0x80
The ranges are 0x01 to 0xFF.
If 400M Node ID is set to 0x00,
the ED of RF_Tx will steady lit
to caution, and W S-R01
doesn’t transmit wireless
packages of location, the user
need to switch to other Node ID
and reboot W S-R01.
OFF -----
9 ON 0x01
OFF -----
10
400M
Group ID
ON 0x02
The ranges are 0x00 to 0x03.
It is need same with RFU-400.
OFF -----
11
ON 0x01
OFF -----
12
Filter
ON 0x02
The ranges are 0x00 to 0x03.
0x00: No giving up any data.
0x01: Giving up the data with
RSSI < -75dBm.
0x02: Giving up the data with
RSSI < -60dBm.
0x03: Giving up the data with
RSSI < -45dBm.

Version 1.0.0
Page 4
Copyright © 2016 by ICP DAS Co., Ltd. All ights eserved.
There are 3 EDs in the W S-R01, and they are PWR, RF_Tx and
RF_Rx. The description of 3 EDs as below:
1. PWR：Power ED, red, it will steady lit after power-on. If the ED don’t
steady lit, it means the power have problem.
2. RF_Tx：RF Transmitting ED, green, it will blink once when W S-R01
transmits a wireless package of 400MHz. If 400M Node ID is set to
0x00, the ED of RF_Tx will steady lit to caution, and W S-R01
doesn’t transmit wireless packages of location, the user need to
switch to other Node ID.
3. RF_Rx：RF Receiving ED, green, it will blink once when W S-R01
receives a wireless package of 2.4GHz.

Version 1.0.0
Page 5
Copyright © 2016 by ICP DAS Co., Ltd. All ights eserved.
4 Startup to use
Wireless ocation System (W S) includes the modules that RFU-400,
W S-T01, W S-R01 and W S software. The user need to check the
wireless setting of each module as below. If the user need more detail
about parameters of wireless setting, please refer to the user manual of
each module. The last, if the user have any questions, please send to
[email protected].
1. RFU-400：
1
2
3
4
5
6
7
8
ON
RF Channel
RF Rate
Group ID Baud Rate
Data Format
SB
MSB
RS-232
RS
-
485
RFU
-
400
W S software
WLS
-
R01
WLS
-
R01
WLS
-
R01
WLS
-
T01
2.4GHz
Sub 1GHz

Version 1.0.0
Page 6
Copyright © 2016 by ICP DAS Co., Ltd. All ights eserved.
2. W S-T01：
The default value about RF channel is 4, RF power is F, Node ID is the
last two bytes of build-in IEEE address. If the user adjust W S-R01
2.4GHz RF channel to 4, the W S-R01 will can receive the wireless
package.
3. W S-R01：
When W S-R01 will be installed, please let sensing symbol (((●)))
face to center of field.
1
2
3
4
5
6
7
8
9
10
11
12
ON
400M
RF Channel
2.4G
RF Channel 400M
Node ID
400M
Group ID
Filter
SB
MSB
Let sensing
symbol face to
center of field
將感測符號面向
WLS-R01
WLS-R01 WLS-R01
WLS-R01
WLS-R01