ICP DAS USA PCI-P16C16 User manual

PCI-P16C16
Language English
Version V1.1.1
Update May 2011
………………………………………………
W
1hat’s on your package?
¾One PCI-P16C16 card
¾One companion PCI CD (V5.1 or later)
¾e Quick Start Guide(This document)On
………………………………………………
2Installing Windows Driver
Follow those steps:
I. Setup the Windows driver.
You can get the driver from:
CD:\NAPDOS\PCI\PCI-P16R16\DLL_OCX\
http://ftp.icpdas.com/pub/cd/iocard/pci/napdos/pci/pci-p16r16/dll_ocx/
- 1 -

II. Click button to start installation.
Windows driver only support windows 98/NT/2000 and
XP/2003/vista 32-bit versions.
III. Click button to install driver into the
default folder.
IV. Click button to continue installation.
V. Click button to reboot the PC.
………………………………………………
In
3stalling Hardware on PC
Follow those steps:
I. Shut down your computer
II. Remove all covers from the computer
III. Select an unused PCI slot
IV. Carefully insert your I/O card into the PCI slot
V. Replace the PC covers
VI. Power on the computer
After powering-on the computer, the Plug&Play card
could work immediately.
- 2 -

………………………………………………
P
4in Assignments
- 3 -

………………………………………………
S
I. Prepar
5elf-Test
e items.
DN-37(Optional)
External Power Device ex.DP-665(Optional)
II. Use DN-37 to connect the CN1.OUT 0 with CN1.DIA_0.
III. CN1.GND1, CN1.GND2 connects to Exterior GND(-).
(pin1 connect to pin12; pin22,pin26 connect to GND(-)).
IV.Use DP-665 +24 V connects to DN-37 CN1.Ext.Power1 and t
DN-37 DIB_0. (+24 V connect to pin20, pin30).
- 4 -
CN2
CN1
DN-37
Exterior
+24 V
GND
GND
+5 V
12 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19
20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37

V. Run the DIO sample program.
Get the zipped file from:
CD:\NAPDOS\PCI\PCI-P16R16\dll_ocx\Demo
VI.Check number of the PCI-P16C16, and test DIO function.
Please follow those steps:
- 5 -
The one PCI- P16C16 had successfully installed
to PC.
1
Select the board number for the PCI- P16C16.It
starts from 0.
2
Click this button to do DIO test.
3
Check the Bit 0(Checkbox) from Digital Output
Set
4
5 Bit 0(light) of the Digital Input Status will
change to Red light(High), PASS!!
1
4 2
3
5
Complete

………………………………………………
A
6dditional Information
9PCI- P16C16 Card Product page:
http://www.icpdas.com/products/DAQ/pc_based/pci_p16c16.htm
9DN-37(Optional) page:
http://www.icpdas.com/products/DAQ/screw_terminal/dn_37.htm
9DP-665(Optional) page:
http://www.icpdas.com/products/Accessories/power_supply/dp-665.htm
9Documents:
CD:\NAPDOS\PCI\PCI-P16R16\manual
http://ftp.icpdas.com.tw/pub/cd/iocard/pci/napdos/pci/pci-p16r16/manual/
9Software:
CD:\NAPDOS\PCI\PCI-P16R16
http://www.icpdas.com/download/pci/p16r16/index.htm
The ICP DAS Web Site
http://www.icpdas.com
Technical support
Supplies and ordering information
Ways to enhance your device
FAQ
Application story
Contact Us
[email protected]
Copyright ©2008 by ICP DAS Co., Ltd. All right are reserved
- 6 -