IEI Technology IDS-310-AL User manual

IDS-310-AL Embedded System
Page I
User Manual
System
MODEL:
IDS-310-AL
Embedded System with Intel® Celeron® N3350E/J3455E,
Three HDMI, Dual GbE LAN, RS-232/422/485, SATA 6Gb/s,
Audio Jacks, USB 3.2 Gen 1, RoHS Compliant
Rev. 1.00 – March 13, 2020

IDS-310-AL Embedded System
Page II
Revision
Date Version Changes
March 13, 2020 1.00 Initial release

IDS-310-AL Embedded System
Page III
Copyright
COPYRIGHT NOTICE
The information in this document is subject to change without prior notice in order to
improve reliability, design and function and does not represent a commitment on the part
of the manufacturer.
In no event will the manufacturer be liable for direct, indirect, special, incidental, or
consequential damages arising out of the use or inability to use the product or
documentation, even if advised of the possibility of such damages.
This document contains proprietary information protected by copyright. All rights are
reserved. No part of this manual may be reproduced by any mechanical, electronic, or
other means in any form without prior written permission of the manufacturer.
TRADEMARKS
All registered trademarks and product names mentioned herein are used for identification
purposes only and may be trademarks and/or registered trademarks of their respective
owners.

IDS-310-AL Embedded System
Page IV
Safety Instructions
Warning! Read the user manual before connecting the system to the power
source.
Vorsicht! Bitte lesen Sie die Bedienungsanleitung, bevor Sie das System an eine
Stromquelle anschließen.
Attention! Avant de brancher le système à la source d'alimentation, consultez le
mode d'emploi.
Avvertenza! Consultare il manuale utente prima di collegare il sistema
all'alimentatore.
Atención! Lea atentamente este manual del usuario antes de operar la fuente de
alimentación.
警告！在將系統連接到電源之前，請仔細閱讀使用手冊。
警告！在将系统连接到电源之前，请仔细阅读使用手册。
Warning! To prevent the system from overheating, do not operate it in an area that
exceeds the maximum operating temperature described in the user manual.
Vorsicht! Um eine Überhitzung des Systems zu vermeiden, betreiben Sie es
ausschließlich im zulässigen Betriebstemperaturbereich. Dieser ist in der
Bedienungsanleitung vermerkt.
Attention! Pour éviter la surchauffe du système, ne l'utilisez pas dans une zone
dont la température dépasse les limites décrits dans le mode d'emploi.
Avvertenza! Per evitare che il sistema si surriscaldi, non utilizzarlo in aree che
superino la temperatura massima d'esercizio descritta nel manuale utente.
Atención! Para evitar el excesivo calentamiento del sistema, no opere en las
condiciones de temperatura superior a lo recomendado en este manual del
usuario.
警告！為防止系統過熱，不要在超過使用手冊上記載的產品工作溫度範圍之外操作
此系統。
警告！为防止系统过热，不要在超过使用手册上记载的产品工作温度范围之外操作
此系统。

IDS-310-AL Embedded System
Page V
Warning! Use only the adapter and power cord approved for this system. Use of
another type of adapter may risk fire or explosion. Please refer to the user manual
for the power adapter specifications.
Vorsicht! Nur zugelassene Netzteile und Netzkabel dürfen verwendet werden. Die
Benutzung von anderen Netzteilen kann einen Brand oder eine Explosion zur
Folge haben. Prüfen Sie die jeweiligen Spezifikationen in der
Bedienungsanleitung.
Attention! Utilisez exclusivement le câble d'alimentation et l’adaptateur
homologués pour ce système. L’utilisation d’un autre type d’adaptateur risquerait
de provoquer un incendie ou une explosion. Veuillez référer au mode d'emploi
pour les spécifications de l'adaptateur d'alimentation.
Avvertenza! Utilizzare solo l'adattatore e il cavo di alimentazione approvati per
questo sistema. L'uso di un altro tipo di adattatore può causare rischio d'incendio
o esplosione. Si prega di fare riferimento al manuale utente per le specifiche
sull'alimentazione.
Atención! Utilice solamente el adaptador de corriente alterna (CA) con Marcas
Conformidad otorgadas. Cualquier otro adaptador no otorgado aumenta el riesgo
de explosión o incendio. Por favor consulte el manual del usuario para las
especificaciones del adaptador de alimentación.
警告！只能使用經過認證、適用於本系統的電源變壓器與電源線。使用不適用的電
源變壓器將可能導致火災或爆炸。電源變壓器規格請參考使用手冊。
警告！只能使用经过认证，适用于本系统的电源适配器与电源线。使用不适用的电
源适配器将可能导致火灾或爆炸。电源适配器规格请参考使用手册。
Warning! Ultimate disposal of this product should be handled according to all
national laws and regulations.
Vorsicht! Die Entsorgung dieses Produkts sollte gemäß allen Bestimmungen und
Gesetzen des Landes erfolgen.
Attention! La mise au rebut ou le recyclage de ce produit sont généralement
soumis aux lois et/ou directives de respect de l'environnement. Renseignez-vous
auprès de l'organisme compétent.
Avvertenza! Lo smaltimento di questo prodotto deve essere eseguito secondo le
leggi e i regolamenti locali.
Atención! La disposición final de residuos de este producto se debe cumplir con
las normativas y leyes del país.
警告！本產品的廢棄處理應根據該國家的法律和規章進行。
警告！本产品的废弃处理应根据该国家的法律和规章进行。

IDS-310-AL Embedded System
Page VI
Manual Conventions
WARNING
Warnings appear where overlooked details may cause damage to the
equipment or result in personal injury. Warnings should be taken
seriously.
CAUTION
Cautionary messages should be heeded to help reduce the chance of
losing data or damaging the product.
NOTE
These messages inform the reader of essential but non-critical
information. These messages should be read carefully as any directions
or instructions contained therein can help avoid making mistakes.
HOT SURFACE
This symbol indicates a hot surface that should not be touched without
taking care.

IDS-310-AL Embedded System
Page VII
Table of Contents
1 INTRODUCTION.......................................................................................................... 1
1.1 OVERVIEW.................................................................................................................. 2
1.2 FEATURES................................................................................................................... 3
1.3 MODEL VA R I AT IONS ................................................................................................... 3
1.4 I/O PANELS................................................................................................................. 4
1.5 BOTTOM PANEL.......................................................................................................... 5
1.6 TECHNICAL SPECIFICATIONS ...................................................................................... 5
1.7 DIMENSIONS............................................................................................................... 7
1.7.1 IDS-310-AL-N1 Dimensions .............................................................................. 7
1.7.1 IDS-310-AL-J1 Dimensions ............................................................................... 8
2 UNPACKING ................................................................................................................. 9
2.1 UNPACKING .............................................................................................................. 10
2.2 PACKING LIST........................................................................................................... 10
2.3 OPTIONAL ITEMS .......................................................................................................11
3 INSTALLATION ......................................................................................................... 12
3.1 ANTI-S TAT I C PRECAUTIONS ...................................................................................... 13
3.2 INSTALLATION PRECAUTIONS ................................................................................... 13
3.2.1 High Surface Temperature ............................................................................... 14
3.3 BOTTOM SURFACE REMOVAL ................................................................................... 15
3.3.1 Bottom Surface Re-installation ........................................................................ 16
3.4 WIRELESS LAN MODULE INSTALLATION (OPTIONAL) ............................................. 16
3.5 PCIE MINI MODULE INSTALLATION ......................................................................... 19
3.6 AT / AT X POWER MODE SELECTION ......................................................................... 21
3.7 MOUNTING THE SYSTEM .......................................................................................... 22
3.8 EXTERNAL PERIPHERAL INTERFACE CONNECTION ................................................... 24
3.8.1 LAN Connectors............................................................................................... 25
3.8.2 HDMI Connectors............................................................................................ 26
3.8.3 Power Connector ............................................................................................. 27
3.8.4 RS-232/422/485 Serial Port Connector ........................................................... 28

IDS-310-AL Embedded System
Page VIII
3.8.5 USB 3.2 Gen 1 (5Gb/s) Connectors................................................................. 29
3.9 POWER-ON PROCEDURE........................................................................................... 29
3.9.1 Installation Checklist ....................................................................................... 29
3.9.2 Power-on Procedure ........................................................................................ 30
3.10 RESET THE SYSTEM ................................................................................................ 30
3.11 FLASH DESCRIPTOR SECURITY OVERRIDE.............................................................. 31
3.12 CLEAR CMOS........................................................................................................ 32
4 BIOS .............................................................................................................................. 33
4.1 INTRODUCTION......................................................................................................... 34
4.1.1 Starting Setup................................................................................................... 34
4.1.2 Using Setup ...................................................................................................... 34
4.1.3 Getting Help..................................................................................................... 35
4.1.4 BIOS Menu Bar................................................................................................ 35
4.2 MAIN........................................................................................................................ 36
4.3 ADVANCED ............................................................................................................... 37
4.3.1 ACPI Settings ................................................................................................... 38
4.3.2 F81803 Super IO Configuration ...................................................................... 39
4.3.2.1 Serial Port 1 Configuration ....................................................................... 39
4.3.3 iWDD H/W Monitor......................................................................................... 41
4.3.4 USB Configuration........................................................................................... 42
4.3.5 CPU Configuration.......................................................................................... 43
4.3.6 RTC Wake Settings ........................................................................................... 45
4.3.7 Power Saving Configuration............................................................................ 46
4.3.8 Serial Port Console Redirection ...................................................................... 47
4.3.8.1 Console Redirection Settings.................................................................... 48
4.3.8.2 Legacy Console Redirection Settings ....................................................... 50
4.3.9 IEI Feature ....................................................................................................... 51
4.4 CHIPSET ................................................................................................................... 52
4.4.1 North Bridge Configuration............................................................................. 53
4.4.1.1 Intel IGD Configuration............................................................................ 53
4.4.1.2 LCD Control ............................................................................................. 55
4.4.2 South Bridge Configuration............................................................................. 56
4.4.2.1 HD-Audio Configuration .......................................................................... 56
4.4.2.2 PCI Express Configuration ....................................................................... 57

IDS-310-AL Embedded System
Page IX
4.4.2.3 SATA Configuration.................................................................................. 61
4.5 SECURITY ................................................................................................................. 62
4.6 BOOT........................................................................................................................ 63
4.7 SAV E &EXIT ............................................................................................................ 65
5 MAINTENANCE ......................................................................................................... 67
5.1 SYSTEM MAINTENANCE OVERVIEW ......................................................................... 68
5.2 COMPONENT REPLACEMENT PROCEDURE ................................................................ 68
5.2.1 SO-DIMM Replacement................................................................................... 69
6 INTERFACE CONNECTORS ................................................................................... 71
6.1 PERIPHERAL INTERFACE CONNECTORS..................................................................... 72
6.2 INTERNAL PERIPHERAL CONNECTORS ...................................................................... 73
6.2.1 Battery Connector (BT1).................................................................................. 73
6.2.2 Digital I/O Connector (DIO1) ......................................................................... 74
6.2.3 Firmware Programming Connector for CH7525 (CN1) ................................. 74
6.2.4 M.2 A-key Slot (M2_KEYA1) ........................................................................... 74
6.2.5 PCIe Mini Slot (MPCIE1)................................................................................ 76
6.2.6 SATA Connector (SATA1)................................................................................. 77
6.2.7 SATA Power Connector (SATA_PWR1) ........................................................... 77
6.2.8 SMBus Connector (J_SMB2) ........................................................................... 77
6.2.9 SPI Flash Connector, BIOS (J_SPI1) .............................................................. 78
6.2.10 SPI Flash Connector, EC (EC_JP1) .............................................................. 78
6.3 EXTERNAL INTERFACE PANEL CONNECTORS ............................................................ 78
A REGULATORY COMPLIANCE .............................................................................. 79
B SAFETY PRECAUTIONS ......................................................................................... 84
B.1 SAFETY PRECAUTIONS............................................................................................. 85
B.1.1 General Safety Precautions ............................................................................. 85
B.1.2 Anti-static Precautions .................................................................................... 86
B.1.3 Product Disposal ............................................................................................. 87
B.2 MAINTENANCE AND CLEANING PRECAUTIONS ........................................................ 88
B.2.1 Maintenance and Cleaning.............................................................................. 88
B.2.2 Cleaning Tools ................................................................................................. 88
C BIOS MENU OPTIONS ............................................................................................. 90

IDS-310-AL Embedded System
Page X
C.1 BIOS CONFIGURATION OPTIONS ............................................................................. 91
D WATCHDOG TIMER ................................................................................................ 93
E ERROR BEEP CODE................................................................................................. 96
E.1 PEI BEEP CODES...................................................................................................... 97
E.2 DXE BEEP CODES ................................................................................................... 97
F HAZARDOUS MATERIALS DISCLOSURE.......................................................... 98
F.1 ROHS II DIRECTIVE (2015/863/EU) ........................................................................ 99
F.2 CHINA ROHS.......................................................................................................... 100

IDS-310-AL Embedded System
Page XI
List of Figures
Figure 1-1: IDS-310-AL Series Embedded System......................................................................2
Figure 1-2: I/O Panel - Front ..........................................................................................................4
Figure 1-3: I/O Panel - Rear............................................................................................................4
Figure 1-4: Bottom Panel ...............................................................................................................5
Figure 1-5: IDS-310-AL-N1 Dimensions (mm)..............................................................................7
Figure 1-6: IDS-310-AL-J1 Dimensions (mm) ..............................................................................8
Figure 3-1: Bottom Surface Retention Screws ..........................................................................15
Figure 3-2: Bottom Surface Removal .........................................................................................15
Figure 3-3: Bottom Surface Installation .....................................................................................16
Figure 3-4: Knockouts for Wireless Antenna ............................................................................16
Figure 3-5: M.2 A-key Slot Location............................................................................................17
Figure 3-6: Inserting the WLAN Module .....................................................................................17
Figure 3-7: Securing the WLAN Module.....................................................................................18
Figure 3-8: Connecting RF Cables..............................................................................................18
Figure 3-9: Securing SMA Connector and External Antenna Installation ..............................19
Figure 3-10: PCIe Mini Slot Location ..........................................................................................19
Figure 3-11: Removing the Retention Screws ...........................................................................20
Figure 3-12: Inserting the PCIe Mini Module into the Slot at an Angle ...................................20
Figure 3-13: Securing the PCIe Mini Module .............................................................................21
Figure 3-14: AT/ATX Switch Location.........................................................................................21
Figure 3–15: Attach Mounting Bracket.......................................................................................22
Figure 3–16: Hook Onto Mounting Bracket ...............................................................................23
Figure 3-17: External Peripheral Interface Connectors ............................................................24
Figure 3-18: RJ-45 Ethernet Connector......................................................................................25
Figure 3-19: HDMI Connector ......................................................................................................27
Figure 3-20: Power Connector ....................................................................................................27
Figure 3-21: Power Button and Power LED ...............................................................................30
Figure 3-22: Reset Button Location............................................................................................30
Figure 3-23: Flash Descriptor Security Override Jumper Location ........................................31
Figure 3-24: Clear CMOS Jumper Location ...............................................................................32
Figure 5-1: SO-DIMM Location ....................................................................................................69

IDS-310-AL Embedded System
Page XII
Figure 5-2: SO-DIMM Installation ................................................................................................70
Figure 6-1: Main Board Layout Diagram ....................................................................................72

IDS-310-AL Embedded System
Page XIII
List of Tables
Table 1-1: IDS-310-AL Model Variations.......................................................................................3
Table 1-2: Technical Specifications..............................................................................................6
Table 2-1: Package List................................................................................................................11
Table 2-2: Optional Items.............................................................................................................11
Table 3-1: LAN Connector Pinouts .............................................................................................25
Table 3-2:: Ethernet Connector LEDs.........................................................................................25
Table 3-3: HDMI Connector Pinouts ...........................................................................................26
Table 3-4: Power Connector Pinouts..........................................................................................27
Table 3-5: RS-232/422/485 Serial Port Pinouts ..........................................................................28
Table 3-6: USB 3.2 Gen 1 Port Pinouts.......................................................................................29
Table 3-7: Flash Descriptor Security Override Jumper Settings.............................................31
Table 3-8: Clear CMOS Jumper Settings....................................................................................32
Table 4-1: BIOS Navigation Keys ................................................................................................35
Table 6-1: Peripheral Interface Connectors ...............................................................................73
Table 6-2: Battery Connector (BT1) Pinouts..............................................................................73
Table 6-3: Digital I/O Connector (DIO1) Pinouts........................................................................74
Table 6-4: Firmware Programming Connector for CH7525 (CN1) Pinouts .............................74
Table 6-5: M.2 A-key Slot (M2_KEYA1) Pinouts ........................................................................75
Table 6-6: PCIe Mini Slot (MPCIE1) Pinouts...............................................................................76
Table 6-7: SATA Connector (SATA1) Pinouts ...........................................................................77
Table 6-8: SATA Power Connector (SATA_PWR1) Pinouts .....................................................77
Table 6-9: SMBus Connector (J_SMB2) Pinouts.......................................................................77
Table 6-10: SPI Flash Connector (J_SPI1) Pinouts ...................................................................78
Table 6-11: SPI Flash Connector (EC_JP1) Pinouts .................................................................78
Table 6-12: External Interface Panel Connectors......................................................................78

IDS-310-AL Embedded System
Page XIV
List of BIOS Menus
BIOS Menu 1: Main .......................................................................................................................36
BIOS Menu 2: Advanced ..............................................................................................................37
BIOS Menu 3: ACPI Settings .......................................................................................................38
BIOS Menu 4: F81803 Super IO Configuration ..........................................................................39
BIOS Menu 5: Serial Port 1 Configuration Menu .......................................................................39
BIOS Menu 6: iWDD H/W Monitor ...............................................................................................41
BIOS Menu 7: USB Configuration ...............................................................................................42
BIOS Menu 8: CPU Configuration ...............................................................................................43
BIOS Menu 9: RTC Wake Settings ..............................................................................................45
BIOS Menu 10: Power Saving Configuration .............................................................................46
BIOS Menu 11: Serial Port Console Redirection .......................................................................47
BIOS Menu 12: Console Redirection Settings...........................................................................48
BIOS Menu 13: Legacy Console Redirection Settings .............................................................50
BIOS Menu 14: IEI Feature...........................................................................................................51
BIOS Menu 15: Chipset ................................................................................................................52
BIOS Menu 16: North Bridge Configuration ..............................................................................53
BIOS Menu 17: Intel IGD Configuration......................................................................................53
BIOS Menu 18: LCD Control ........................................................................................................55
BIOS Menu 19: South Bridge Configuration..............................................................................56
BIOS Menu 20: HD-Audio Configuration....................................................................................56
BIOS Menu 21: PCI Express Configuration ...............................................................................57
BIOS Menu 22: Onboard LAN1/LAN2...........................................................................................58
BIOS Menu 23: M2_KEYA1...........................................................................................................59
BIOS Menu 24: MPCIE1 ................................................................................................................60
BIOS Menu 25: SATA Configuration ...........................................................................................61
BIOS Menu 26: Security ...............................................................................................................62
BIOS Menu 27: Boot .....................................................................................................................63
BIOS Menu 28: Save & Exit..........................................................................................................65

IDS-310-AL Embedded System
Page 1
Chapter
1
1 Introduction

IDS-310-AL Embedded System
Page 2
1.1 Overview
Figure 1-1: IDS-310-AL Series Embedded System
The IDS-310-AL series is a fanless embedded system with Intel®Celeron®N3350E or
J3455E SoC. The IDS-310-AL is preinstalled with 4 GB of DDR3L SO-DIMM, and can
accommodate up to 8 GB of DDR3L memory. Storage in the system is supported by the
full-size PCIe Mini card slot for mSATA module or the SATA 6Gb/s connector for SATA
DOM.
The IDS-310-AL includes three HDMI outputs supporting up to 3840 x 2160 resolutions.
Other slots and connectors include one RS-232/422/485, two GbE ports, three USB 3.2
Gen 1 (5Gb/s) ports, audio (line-out and mic-in) and one M.2 A-key 2230 slot for an
optional Wi-Fi module.

IDS-310-AL Embedded System
Page 3
1.2 Features
The IDS-310-AL has the following features
Fanless design
Intel®Celeron®N3350E/J3455E SoC platform delivers an optimized balance
between performance and power consumption
Three HDMI connectors supporting triple independent display with up to
3840 x 2160 resolution
Two GbE LAN for high speed network applications
One full-size PCIe Mini card slot with SIM card slot (supports mSATA modules
or WWAN modules)
One SATA 6Gb/s connector for SATA DOM
Three USB 3.2 Gen 1 (5Gb/s) ports
One RS-232/422/485 serial port
Support audio line-out and mic-in
RoHS compliant design
1.3 Model Variations
The model variations of the IDS-310-AL are listed below.
Model No. SoC Dimensions
IDS-310-AL-N1/4GB Intel® Celeron® N3350E 137 x 102.8 x 38.1 (mm)
IDS-310-AL-J1/4GB Intel® Celeron® J3455E 137 x 102.8 x 52.1 (mm)
Table 1-1: IDS-310-AL Model Variations

IDS-310-AL Embedded System
Page 4
1.4 I/O Panels
The I/O panels of the IDS-310-AL are shown in Figure 1-2 and Figure 1-3.
Figure 1-2: I/O Panel - Front
Figure 1-3: I/O Panel - Rear

IDS-310-AL Embedded System
Page 5
1.5 Bottom Panel
The bottom panel of the IDS-310-AL contains four screw holes for mounting. The bottom
panel also provides access to the internal components, including SO-DIMM slot, PCIe
Mini card slot and M.2 module slot.
Figure 1-4: Bottom Panel
1.6 Technical Specifications
The specifications for the IDS-310-AL are listed below.
IDS-310-AL
CPU N1 SKU:
Intel® Celeron® N3350E (up to 2.4 GHz, dual-core, TDP 6 W)
J1 SKU:
Intel® Celeron® J3455E (up to 2.3 GHz, quad-core, TDP 10 W)
System Memory 1 x 204-pin DDR3L SDRAM SO-DIMM slot
(system max. 8 GB)
4 GB DDR3L SO-DIMM preinstalled
Display 3 x HDMI 1.4b connector (up to 3840x2160 @ 30Hz)
(HDMI 3 does not support audio)
Ethernet 2 x GbE LAN RJ-45 by Realtek RTL8111H GbE controller
Serial Port 1 x RS-232/422/485 DB-9 serial port
USB 3 x USB 3.2 Gen 1 (5Gb/s) port

IDS-310-AL Embedded System
Page 6
Audio 7.1+2 channel Realtek ALC888 HD Audio codec
1 x Line-out jack
1 x Mic-in jack
SATA 1 x SATA 6Gb/s connector for SATA DOM
Expansion Slot 1 x Full-size PCIe Mini slot (PCIe x1, USB 2.0, SATA) with on-board
SIM card slot for WWAN modules, or mSATA modules
1 x M.2 A-key 2230 slot (PCIe x1, USB 2.0) for optional Wi-Fi
module
Wireless Optional Wi-Fi 802.11a/b/g/n/ac
Buttons and Indicators 1 x Power button
1 x Reset button
1 x AT/ATX power mode switch
1 x Power LED (green)
1 x HDD LED (yellow)
Mounting VESA 75/100 via mounting bracket
Power Input 12 V DC
Power Consumption 12V @ 1.9A (Intel®Celeron®N3350E with 4GB memory)
12V @ 2.2A (Intel
®
Celeron
®
J3455E with 4GB memory)
Operating Temperature -20ºC ~ 60ºC
Storage Temperature -30ºC ~ 80ºC
Operating Humidity 10% ~ 90%, non-condensing
Color Brown & Silver
Chassis Construction Extruded aluminum alloys
Dimensions (W x D x H) N1 SKU: 137 mm x 102.8 mm x 38.1 mm
J1 SKU: 137 mm x 102.8 mm x 52.1 mm
Operation Vibration MIL-STD-810F 514.6C-1 with mSATA
Operation Shock Half-sine wave shock 5G, 11ms, 100 shocks per axis
Weight (Net/Gross) N1 SKU: 680 g / 1.4 kg
J1 SKU: 950 g / 1.7 kg
EMC CE, FCC Class A, BSMI
Supported OS Microsoft Windows 10
Linux
Table 1-2: Technical Specifications