IEI Technology NANO-BT-i1 Series User manual

1
EPIC SBC supports Intel® 22nm Atom™/Celeron® on-board SoC with
VGA, HDMI, LVDS, Dual Intel® PCIe GbE, USB 3.0, Dual PCIe Mini,
SATA 3Gb/s, mSATA, COM, Audio and RoHS
NANO-BT-i1
Quick Installation Guide
Version 1.0
Apr 03, 2014.
Package List
NANO-BT-i1 package includes the following items:
1 x NANO-BT single board computer with heatsink
2 x SATA with power cable kit (P/N: 32801-000201-100-RS)
2 x RS-232 cable (P/N: 19800-000300-200-RS)
1 x Power cable (P/N: 32100-087100-RS)
1 x QIG (Quick Installation Guide)
1 x One Key Recovery CD
1 x Utility CD
©2006 Copyright by IEI Integration corp.
All rights reserved.

2
Specifications
SoC:
Intel® Atom™ E3845 on-board SoC (1.91GHz, quad-core,
2MB cache, TDP=10W)
Intel® Atom™ E3827 on-board SoC (1.75GHz, dual-core, 1MB
cache, TDP=8W)
Intel® Atom™ E3826 on-board SoC (1.46GHz, dual-core, 1MB
cache, TDP=7W)
Intel® Atom™ E3825 on-board SoC (1.33GHz, dual-core, 1MB
cache, TDP=6W)
Intel® Atom™ E3815 on-board SoC (1.46GHz, single-core,
512KB cache, TDP=5W)
Intel® Celeron® J1900 on-board SoC (2GHz, quad-core, 2MB
cache, TDP=10W)
Intel® Celeron® N2930 on-board SoC (1.83GHz, quad-core,
2MB cache, TDP=7.5W)
Intel® Celeron® N2807 on-board SoC (1.58GHz, dual-core,
2MB cache, TDP=4.5W)
BIOS:AMI UEFI BIOS
Memory:
One 204-pin 1600/1333MHz dual-channel DDR3L SDRAM
unbuffered DIMMs support up to 8GB
Graphics Engine:
Intel® HD Graphics Gen 7 Engines with 4 execution unit,
supports DX11.1, OpenGL 4.2 and OpenCL1.2
Display Output:
VGA (up to 2560x1600@60Hz)
HDMI (up to 2560x1600@60Hz)
18/24-bit dual-channel LVDS by CH7511B DP to LVDS
converter (up to 1920x1200@60Hz)
Ethernet:
GbE1: Intel® I210-AT PCIe controller with NCSI support
GbE2: Intel® I211-AT PCIe controller
Super IO: Fintek F81866

3
I/O Interface:
2 x SATA 3G/s with 5V SATA power connector (No RAID)
1 x USB 3.0 (on rear I/O)
3 x USB 2.0 (1 on rear I/O, 2 by pin header)
1 x RS-422/485 (pin header)
3 x RS-232 (pin header)
1 x PS/2 KB/MS
iRIS Remote Management Module: 1 x iRIS-1010 slot
SMBus: 1 x 4-pin (1x4) wafer
Audio:
Realtek ALC662 HD Audio codec
1 x Analog audio by 10-pin (2x5) header
Front Panel:
1 x 6-pin (1x6) wafer for power LED & HDD LED
1 x 2-pin (1x2) wafer for power button
1 x 2-pin (1x2) wafer for power reset
LAN LED:2 x 2-pin header for LAN1 Link LED, LAN2 Link LED
Expansion:
1 x Full-size PCIe Mini card slot (support mSATA co-lay SATA
port 2)
1 x PCI/104 slot (PCI signal)
Digital I/O:8-bit digital I/O (4-bit input / 4-bit output)
FAN:
1 x 4-pin CPU fan connector
1 x 4-pin system fan connector
Power supply:
12V only DC input
1 x internal 4-pin (2x2) power connector
Support AT/ATX mode
Watchdog Timer:
Software programmable support 1~255 sec. system reset
Operating Temperature: -20°C ~ 60°C
Storage Temperature: -30°C ~ 85°C

4
Operation Humidity: 5% ~ 95%, non-condensing
Dimensions: 115 mm x 165 mm
Weight(GW/ NW): 850g / 350g
Ordering Information
EPIC SBC supports Intel® 22nm quad-core J1900 2.0GHz (10W) on- NANO-BT-i1-J19001-R10:
board SoC with VGA/HDMI/LVDS, Dual PCIe GbE, USB 3.0, PCIe
Mini, SATA 3Gb/s, mSATA, COM, iRIS-1010, Audio and RoHS
EPIC SBC supports Intel® 22nm quad-core N2930 1.83GHz (7.5W)
NANO-BT-i1-N29301-R10:
on-board SoC with VGA/HDMI/LVDS, Dual PCIe GbE, USB 3.0, PCIe
Mini, SATA 3Gb/s, mSATA, COM, iRIS-1010, Audio and RoHS
EPIC SBC supports Intel® 22nm quad-core N2807 1.58GHz
NANO-BT-i1-N28071-R10:
(4.5W) on-board SoC with VGA/HDMI/LVDS, Dual PCIe GbE,
USB 3.0, PCIe Mini, SATA 3Gb/s, mSATA, COM, iRIS-1010,
Audio and RoHS
EPIC SBC supports Intel® 22nm quad-core E3845 1.91GHz (10W)
NANO-BT-i1-E38451-R10:
on-board SoC with VGA/HDMI/LVDS, Dual PCIe GbE, USB 3.0, PCIe
Mini, SATA 3Gb/s, mSATA, COM, iRIS-1010, Audio and RoHS
(by project support, MOQ 100pcs/lot)

5
EPIC SBC supports Intel® 22nm dual-core E3827 1.75GHz (8W) on- NANO-BT-i1-E38271-R10:
board SoC with VGA/HDMI/LVDS, Dual PCIe GbE, USB 3.0, PCIe
Mini, SATA 3Gb/s, mSATA, COM, iRIS-1010, Audio and RoHS
(by project support, MOQ 100pcs/lot)
EPIC SBC supports Intel® 22nm dual-core E3826 1.46GHz (7W) on-
NANO-BT-i1-E38261-R10:
board SoC with VGA/HDMI/LVDS, Dual PCIe GbE, USB 3.0, PCIe
Mini, SATA 3Gb/s, mSATA, COM, iRIS-1010, Audio and RoHS
(by project support, MOQ 100pcs/lot)
EPIC SBC supports Intel® 22nm dual-core E3825 1.33GHz (6W) on-
NANO-BT-i1-E38251-R10:
board SoC with VGA/HDMI/LVDS, Dual PCIe GbE, USB 3.0, PCIe
Mini, SATA 3Gb/s, mSATA, COM, iRIS-1010, Audio and RoHS
(by project support, MOQ 100pcs/lot)
EPIC SBC supports Intel® 22nm single-core E3815 1.46GHz (5W)
NANO-BT-i1-E38151-R10:
on-board SoC with VGA/HDMI/LVDS, Dual PCIe GbE, USB 3.0, PCIe
Mini, SATA 3Gb/s, mSATA, COM, iRIS-1010, Audio and RoHS
(by project support, MOQ 100pcs/lot)
iRIS-1010-R10:
IPMI 2.0 adapter card with AST1010 BMC chip (W/O KVM
over IP function) for PCIe Mini socket interface
32006-001100-100-RS:
PS/2 KB/MS Y-cable with bracket, 135mm 32000-070301-RS:
Dual-port USB 2.0 cable 32205-003800-100-RS:RS-422/485 cable, 200mm

6
Jumpers setting and connectors
LABEL FUNCTION
J_ATX_AT1 AT/ATX mode select switch
J_CMOS1 Clear CMOS button
J_LCD_PWR1 LCD voltage selection
SW1 LVDS panel resolution selection
J_SATA1 mSATA/SATA Selection
J_PCI104 PCI-104 Voltage Selection
CN10 12 V DC input connector
AUDIO1 Audio connector
BAT1 Battery connector
INV1 Backlight inverter connector
SP1
Buzzer connector
CHASSIS1
Chassis intrusion connector
DIO1
Digital I/O connector
CPU_FAN1
Fan connector (CPU)
SYS_FAN1 Fan connectors (system)
CN11
Front panel connector
IPMI1
iRIS module connector
ID_LED2
IPMI LED connector
JP8
LAN1 LED connector
JP9 LAN2 LED connector
CN2
LVDS connector
DIMM1
Memory card slot
PC104_PLUS1
PCI-104 slot
CN8
PCIe Mini slot
PWR_BTN1 Power button connector
PWR_SW1
Power button
RST_BTN1
Reset button connector
SATA1, SATA2
SATA 3Gb/s drive connectors
SATA_PWR1, SATA_PWR2
SATA power connector (5 V)
COM1, COM2, COM3 Serial port, RS-232
COM4
Serial port, RS-422/485

7
CN5
SMBus connector
JSPI1 SPI flash connector
JSPI2
SPI flash connector (EC)
USB1
USB 2.0 connector
LAN1, LAN2
Ethernet ports
CN12
HDMI connector
PT1 Keyboard/Mouse connector
CN6
USB 2.0 connector
CN7
USB 3.0 connector
VGA1
VGA connector
J_PCI104: PCI-104 Voltage Selection
PIN NO.
DESCRIPTION
Short A- B
+3.3 V (Default)
Short B- C
+5 V
J_SATA1: mSATA/SATA Selection
PIN NO. DESCRIPTION
Short A- B Automatically detect mSATA device (Default)
Short B- C
Enable mSATA device
J_LCD_PWR1: LCD voltage selection
PIN NO.
DESCRIPTION
Short A- B
+3.3 V (Default)
Short B- C
+5 V
J_CMOS1: Clear CMOS button
PIN NO.
DESCRIPTION
Push
Clear CMOS
J_ATX_AT1: AT/ATX mode select switch
PIN NO.
DESCRIPTION
Short A - B
ATX Mode (default)
Short B - C
AT Mode

8
AUDIO1: Audio Connector
PIN NO.
DESCRIPTION
PIN NO.
DESCRIPTION
1
LINE_OUTR
2
LINEIN_R
3
ANALOG_GND
4
ANALOG_GND
5
LINE_OUTL
6
LINEIN_L
7
ANALOG_GND
8
ANALOG_GND
9
MICIN1
10
MICIN2
CN10: 12 V DC input connector
PIN NO.
DESCRIPTION
PIN NO.
DESCRIPTION
1
GND
2
GND
3
+12V
4
+12V
SW1: LVDS panel resolution selection
* ON=0, OFF=1; Single=S, Dual=D
4-3-2-1
DESCRIPTION
0000
800x600 18-bit Single (Default)
0001 1024x768 18-bit Single
0010 1024x768 24-bit Single
0011 1280x768 18-bit Single
0100 1280x800 18-bit Single
0101 1280x960 18-bit Single
0110
1280x1024 24-bit Dual
0111
1366x768 18-bit Single
1000
1366x768 24-bit Single
1001
1440x960 24-bit Dual
1010
1400x1050 24-bit Dual
1011
1600x900 24-bit Dual
1100
1680x1050 24-bit Dual
1101
1600x1200 24-bit Dual
1110
1920x1080 24-bit Dual
1111
1920x1200 24-bit Dual

9
SYS_FAN1: Fan connector (System)
PIN NO.
DESCRIPTION
PIN NO.
DESCRIPTION
1
FAN_IN
2
VCC(12V)
3
GND
DIO1: Digital I/O connector
PIN NO.
DESCRIPTION
PIN NO.
DESCRIPTION
1
GND
2
+5V
3
DOUT3
4
DOUT2
5
DOUT1
6
DOUT0
7
DIN3
8
DIN2
9
DIN1
10
DIN0
INV1: Backlight inverter connector
PIN NO.
DESCRIPTION
PIN NO.
DESCRIPTION
1
BRIGHTNESS2
2
GND
3
VCC
4
GND
5
ENABKL2
CHASSIS1: Chassis intrusion connector
PIN NO.
DESCRIPTION
PIN NO.
DESCRIPTION
1
Pull high to +3.3V_ALW
2
CHASSIE_EC
BAT1: Battery connector
PIN NO.
DESCRIPTION
PIN NO.
DESCRIPTION
1
VBATT
2
GND
CPU_FAN1: Fan connector (CPU)
PIN NO.
DESCRIPTION
PIN NO.
DESCRIPTION
1
FAN_IN
2
VCC(12V)
3
GND

10
CN2: LVDS connector
PIN NO. DESCRIPTION PIN NO. DESCRIPTION
1 GND 2 GND
3 A0P_L 4 A0M_L
5 A1P_L 6 A1M_L
7 A2P_L 8 A2M_L
9 CLK1P_L 10 CLK1M_L
11 A3P_L 12 A3M_L
13 GND 14 GND
15 A4P_L 16 A4M_L
17 A5P_L 18 A5M_L
19 A6P_L 20 A6M_L
21 CLK2P_L 22 CLK2M_L
23 A7P_L 24 A7M_L
25 GND 26 GND
27 +VCC_LCD_BEAD2 28 +VCC_LCD_BEAD2
29 +VCC_LCD_BEAD2 30 +VCC_LCD_BEAD2
JP9: LAN LED Connector
PIN NO.
DESCRIPTION
PIN NO.
DESCRIPTION
1
VCC
2
L2_LINK_ACT-
JP8: LAN LED Connector
PIN NO.
DESCRIPTION
PIN NO.
DESCRIPTION
1 VCC 2 L1_LINK_ACT-
ID_LED2: IPMI LED Connector
PIN NO.
DESCRIPTION
PIN NO.
DESCRIPTION
1
ID_LED+
2
ID_LED-
CN11: Front panel connector
PIN NO.
DESCRIPTION
PIN NO.
DESCRIPTION
1
VCC
4
PWR_LED-
2
GND
5
HDD_LED+
3
PWR_LED+
6
HDD_LED-