IEI Technology IDS-310AI User manual

IDS-310AI Embedded System
Page I
User Manual
System
MODEL:
IDS-310AI
Embedded System with Intel® Celeron® J3455 Processor,
Three HDMI, 128 GB SATA DOM, USB 3.2 Gen 1, Dual GbE,
VPU Accelerator, RS-232/422/485 and RoHS Compliant
Rev. 1.00 – September 28, 2020

IDS-310AI Embedded System
Page II
Revision
Date Version Changes
September 28, 2020 1.00 Initial release

IDS-310AI Embedded System
Page III
Copyright
COPYRIGHT NOTICE
The information in this document is subject to change without prior notice in order to
improve reliability, design and function and does not represent a commitment on the part
of the manufacturer.
In no event will the manufacturer be liable for direct, indirect, special, incidental, or
consequential damages arising out of the use or inability to use the product or
documentation, even if advised of the possibility of such damages.
This document contains proprietary information protected by copyright. All rights are
reserved. No part of this manual may be reproduced by any mechanical, electronic, or
other means in any form without prior written permission of the manufacturer.
TRADEMARKS
All registered trademarks and product names mentioned herein are used for identification
purposes only and may be trademarks and/or registered trademarks of their respective
owners.

IDS-310AI Embedded System
Page IV
Safety Instructions
Warning! Read the user manual before connecting the system to the power
source.
Vorsicht! Bitte lesen Sie die Bedienungsanleitung, bevor Sie das System an eine
Stromquelle anschließen.
Attention! Avant de brancher le système à la source d'alimentation, consultez le
mode d'emploi.
Avvertenza! Consultare il manuale utente prima di collegare il sistema
all'alimentatore.
Atención! Lea atentamente este manual del usuario antes de operar la fuente de
alimentación.
警告！在將系統連接到電源之前，請仔細閱讀使用手冊。
警告！在将系统连接到电源之前，请仔细阅读使用手册。
Warning! To prevent the system from overheating, do not operate it in an area that
exceeds the maximum operating temperature described in the user manual.
Vorsicht! Um eine Überhitzung des Systems zu vermeiden, betreiben Sie es
ausschließlich im zulässigen Betriebstemperaturbereich. Dieser ist in der
Bedienungsanleitung vermerkt.
Attention! Pour éviter la surchauffe du système, ne l'utilisez pas dans une zone
dont la température dépasse les limites décrits dans le mode d'emploi.
Avvertenza! Per evitare che il sistema si surriscaldi, non utilizzarlo in aree che
superino la temperatura massima d'esercizio descritta nel manuale utente.
Atención! Para evitar el excesivo calentamiento del sistema, no opere en las
condiciones de temperatura superior a lo recomendado en este manual del
usuario.
警告！為防止系統過熱，不要在超過使用手冊上記載的產品工作溫度範圍之外操作
此系統。
警告！为防止系统过热，不要在超过使用手册上记载的产品工作温度范围之外操作
此系统。

IDS-310AI Embedded System
Page V
Warning! Use only the adapter and power cord approved for this system. Use of
another type of adapter may risk fire or explosion. Please refer to the user manual
for the power adapter specifications.
Vorsicht! Nur zugelassene Netzteile und Netzkabel dürfen verwendet werden. Die
Benutzung von anderen Netzteilen kann einen Brand oder eine Explosion zur
Folge haben. Prüfen Sie die jeweiligen Spezifikationen in der
Bedienungsanleitung.
Attention! Utilisez exclusivement le câble d'alimentation et l’adaptateur
homologués pour ce système. L’utilisation d’un autre type d’adaptateur risquerait
de provoquer un incendie ou une explosion. Veuillez référer au mode d'emploi
pour les spécifications de l'adaptateur d'alimentation.
Avvertenza! Utilizzare solo l'adattatore e il cavo di alimentazione approvati per
questo sistema. L'uso di un altro tipo di adattatore può causare rischio d'incendio
o esplosione. Si prega di fare riferimento al manuale utente per le specifiche
sull'alimentazione.
Atención! Utilice solamente el adaptador de corriente alterna (CA) con Marcas
Conformidad otorgadas. Cualquier otro adaptador no otorgado aumenta el riesgo
de explosión o incendio. Por favor consulte el manual del usuario para las
especificaciones del adaptador de alimentación.
警告！只能使用經過認證、適用於本系統的電源變壓器與電源線。使用不適用的電
源變壓器將可能導致火災或爆炸。電源變壓器規格請參考使用手冊。
警告！只能使用经过认证，适用于本系统的电源适配器与电源线。使用不适用的电
源适配器将可能导致火灾或爆炸。电源适配器规格请参考使用手册。
Warning! Ultimate disposal of this product should be handled according to all
national laws and regulations.
Vorsicht! Die Entsorgung dieses Produkts sollte gemäß allen Bestimmungen und
Gesetzen des Landes erfolgen.
Attention! La mise au rebut ou le recyclage de ce produit sont généralement
soumis aux lois et/ou directives de respect de l'environnement. Renseignez-vous
auprès de l'organisme compétent.
Avvertenza! Lo smaltimento di questo prodotto deve essere eseguito secondo le
leggi e i regolamenti locali.
Atención! La disposición final de residuos de este producto se debe cumplir con
las normativas y leyes del país.
警告！本產品的廢棄處理應根據該國家的法律和規章進行。
警告！本产品的废弃处理应根据该国家的法律和规章进行。

IDS-310AI Embedded System
Page VI
Manual Conventions
WARNING
Warnings appear where overlooked details may cause damage to the
equipment or result in personal injury. Warnings should be taken
seriously.
CAUTION
Cautionary messages should be heeded to help reduce the chance of
losing data or damaging the product.
NOTE
These messages inform the reader of essential but non-critical
information. These messages should be read carefully as any directions
or instructions contained therein can help avoid making mistakes.
HOT SURFACE
This symbol indicates a hot surface that should not be touched without
taking care.

IDS-310AI Embedded System
Page VII
Table of Contents
1 INTRODUCTION.......................................................................................................... 1
1.1 OVERVIEW.................................................................................................................. 2
1.2 FEATURES................................................................................................................... 2
1.3 I/O PANELS................................................................................................................. 3
1.4 SIDE PANEL ................................................................................................................ 4
1.5 TECHNICAL SPECIFICATIONS ...................................................................................... 4
1.6 DIMENSIONS............................................................................................................... 6
2 UNPACKING................................................................................................................. 7
2.1 UNPACKING................................................................................................................ 8
2.2 PACKING LIST............................................................................................................. 8
2.3 OPTIONAL ITEMS........................................................................................................ 9
3 INSTALLATION ......................................................................................................... 10
3.1ANTI-STATIC PRECAUTIONS.......................................................................................11
3.2 INSTALLATION PRECAUTIONS....................................................................................11
3.2.1 High Surface Temperature............................................................................... 12
3.3 BOTTOM SURFACE REMOVAL ................................................................................... 12
3.4 WIRELESS LAN MODULE INSTALLATION (OPTIONAL)............................................. 14
3.5AT/ATX POWER MODE SELECTION ......................................................................... 17
3.6 MOUNTING THE SYSTEM .......................................................................................... 18
3.7 EXTERNAL PERIPHERAL INTERFACE CONNECTION ................................................... 19
3.7.1 LAN Connectors............................................................................................... 20
3.7.2 HDMI Connectors............................................................................................ 21
3.7.3 Power Connector............................................................................................. 22
3.7.4 RS-232/422/485 Serial Port Connector........................................................... 23
3.7.5 USB 3.2 Gen 1 (5Gb/s) Connectors................................................................. 24
3.8 POWER-ON PROCEDURE........................................................................................... 25
3.8.1 Installation Checklist....................................................................................... 25
3.8.2 Power-on Procedure ........................................................................................ 25
3.9 RESET THE SYSTEM.................................................................................................. 26

IDS-310AI Embedded System
Page VIII
3.10 CLEAR CMOS........................................................................................................ 26
3.11 FLASH DESCRIPTOR SECURITY OVERRIDE.............................................................. 27
4 BIOS.............................................................................................................................. 28
4.1 INTRODUCTION......................................................................................................... 29
4.1.1 Starting Setup................................................................................................... 29
4.1.2 Using Setup...................................................................................................... 29
4.1.3 Getting Help..................................................................................................... 30
4.1.4 BIOS Menu Bar................................................................................................ 30
4.2 MAIN........................................................................................................................ 31
4.3ADVANCED............................................................................................................... 32
4.3.1 Trusted Computing........................................................................................... 32
4.3.2 ACPI Settings................................................................................................... 34
4.3.3 F81803 Super IO Configuration...................................................................... 35
4.3.3.1 Serial Port 1 Configuration....................................................................... 35
4.3.4 iWDD H/W Monitor......................................................................................... 36
4.3.5 USB Configuration........................................................................................... 37
4.3.6 CPU Configuration.......................................................................................... 39
4.3.7 RTC Wake Settings........................................................................................... 40
4.3.8 Power Saving Configuration............................................................................ 42
4.3.9 Serial Port Console Redirection ...................................................................... 43
4.3.9.1 Console Redirection Settings.................................................................... 44
4.3.9.2 Legacy Console Redirection Settings....................................................... 46
4.3.10 IEI Feature..................................................................................................... 47
4.4 CHIPSET ................................................................................................................... 48
4.4.1 North Bridge Configuration............................................................................. 49
4.4.1.1 Intel IGD Configuration............................................................................ 49
4.4.1.2 LCD Control ............................................................................................. 51
4.4.2 South Bridge Configuration............................................................................. 52
4.4.2.1 HD-Audio Configuration.......................................................................... 52
4.4.2.2 PCI Express Configuration....................................................................... 53
4.4.2.3 SATA Configuration.................................................................................. 56
4.5 SECURITY................................................................................................................. 57
4.6 BOOT........................................................................................................................ 58
4.7 SAVE &EXIT ............................................................................................................ 60

IDS-310AI Embedded System
Page IX
5 MAINTENANCE......................................................................................................... 62
5.1 SYSTEM MAINTENANCE OVERVIEW......................................................................... 63
5.2 COMPONENT REPLACEMENT PROCEDURE ................................................................ 63
5.2.1 SO-DIMM Replacement................................................................................... 64
6 INTERFACE CONNECTORS................................................................................... 66
6.1 PERIPHERAL INTERFACE CONNECTORS..................................................................... 67
6.2 INTERNAL PERIPHERAL CONNECTORS...................................................................... 68
6.2.1 Battery Connector (BT1).................................................................................. 68
6.2.2 Digital I/O Connector (DIO1)......................................................................... 69
6.2.3 Firmware Programming Connector for CH7525 (CN1) ................................. 69
6.2.4 M.2 A-key Slot (M2_KEYA1) ........................................................................... 69
6.2.5 PCIe Mini Slot (MPCIE1)................................................................................ 71
6.2.6 SATA Connector (SATA1)................................................................................. 72
6.2.7 SATA Power Connector (SATA_PWR1)........................................................... 72
6.2.8 SMBus Connector (J_SMB2)........................................................................... 72
6.2.9 SPI Flash Connector, BIOS (J_SPI1) .............................................................. 73
6.2.10 SPI Flash Connector, EC (EC_JP1).............................................................. 73
6.3 EXTERNAL INTERFACE PANEL CONNECTORS............................................................ 73
A REGULATORY COMPLIANCE.............................................................................. 74
B SAFETY PRECAUTIONS......................................................................................... 79
B.1 SAFETY PRECAUTIONS............................................................................................. 80
B.1.1 General Safety Precautions............................................................................. 80
B.1.2 Anti-static Precautions .................................................................................... 81
B.1.3 Product Disposal............................................................................................. 82
B.2 MAINTENANCE AND CLEANING PRECAUTIONS ........................................................ 83
B.2.1 Maintenance and Cleaning.............................................................................. 83
B.2.2 Cleaning Tools................................................................................................. 83
C BIOS MENU OPTIONS............................................................................................. 85
C.1 BIOS CONFIGURATION OPTIONS ............................................................................. 86
D WATCHDOG TIMER ................................................................................................ 88
E ERROR BEEP CODE................................................................................................. 91

IDS-310AI Embedded System
Page X
E.1 PEI BEEP CODES...................................................................................................... 92
E.2 DXE BEEP CODES ................................................................................................... 92
F HAZARDOUS MATERIALS DISCLOSURE.......................................................... 93
F.1 ROHS II DIRECTIVE (2015/863/EU)........................................................................ 94
F.2 CHINA ROHS............................................................................................................ 95

IDS-310AI Embedded System
Page XI
List of Figures
Figure 1-1: IDS-310AI Embedded System....................................................................................2
Figure 1-2: I/O Panel - Front ..........................................................................................................3
Figure 1-3: I/O Panel - Rear............................................................................................................3
Figure 1-4: Side Panel....................................................................................................................4
Figure 1-5: Dimensions with Wall Mount Brackets (mm)...........................................................6
Figure 3-1: Bottom Surface Retention Screws..........................................................................13
Figure 3-2: Bottom Surface Removal .........................................................................................13
Figure 3-3: Knockouts for Wireless Antenna ............................................................................14
Figure 3-4: Mustang-MPCIE-MX2 Accelerator Card..................................................................14
Figure 3-5: M.2 A-key Slot Location............................................................................................15
Figure 3-6: Inserting the WLAN Module.....................................................................................15
Figure 3-7: Securing the WLAN Module.....................................................................................16
Figure 3-8: Connecting RF Cables..............................................................................................16
Figure 3-9: Securing SMA Connector and External Antenna Installation ..............................17
Figure 3-10: AT/ATX Switch Location.........................................................................................17
Figure 3-11: Mounting Bracket Retention Screws ....................................................................18
Figure 3-12: External Peripheral Interface Connectors............................................................19
Figure 3-13: RJ-45 Ethernet Connector......................................................................................20
Figure 3-14: HDMI Connector......................................................................................................22
Figure 3-15: Power Connector ....................................................................................................22
Figure 3-16: Power Button and Power LED ...............................................................................25
Figure 3-17: Reset Button Location............................................................................................26
Figure 3-18: Clear CMOS Jumper Location...............................................................................26
Figure 3-19: Flash Descriptor Security Override Jumper Location ........................................27
Figure 5-1: SO-DIMM Location....................................................................................................64
Figure 5-2: SO-DIMM Installation ................................................................................................65
Figure 6-1: Main Board Layout Diagram ....................................................................................67

IDS-310AI Embedded System
Page XII
List of Tables
Table 1-1: Technical Specifications..............................................................................................5
Table 2-1: Package List..................................................................................................................9
Table 2-2: Optional Items...............................................................................................................9
Table 3-1: LAN Connector Pinouts.............................................................................................20
Table 3-2:: Ethernet Connector LEDs.........................................................................................20
Table 3-3: HDMI Connector Pinouts ...........................................................................................21
Table 3-4: Power Connector Pinouts..........................................................................................22
Table 3-5: RS-232/422/485 Serial Port Pinouts..........................................................................23
Table 3-6: USB 3.2 Gen 1 Port Pinouts.......................................................................................24
Table 3-7: Clear CMOS Jumper Settings....................................................................................26
Table 3-8: Flash Descriptor Security Override Jumper Settings.............................................27
Table 4-1: BIOS Navigation Keys................................................................................................30
Table 6-1: Peripheral Interface Connectors...............................................................................68
Table 6-2: Battery Connector (BT1) Pinouts..............................................................................68
Table 6-3: Digital I/O Connector (DIO1) Pinouts........................................................................69
Table 6-4: Firmware Programming Connector for CH7525 (CN1) Pinouts.............................69
Table 6-5: M.2 A-key Slot (M2_KEYA1) Pinouts ........................................................................70
Table 6-6: PCIe Mini Slot (MPCIE1) Pinouts...............................................................................71
Table 6-7: SATA Connector (SATA1) Pinouts ...........................................................................72
Table 6-8: SATA Power Connector (SATA_PWR1) Pinouts.....................................................72
Table 6-9: SMBus Connector (J_SMB2) Pinouts.......................................................................72
Table 6-10: SPI Flash Connector (J_SPI1) Pinouts...................................................................73
Table 6-11: SPI Flash Connector (EC_JP1) Pinouts .................................................................73
Table 6-12: External Interface Panel Connectors......................................................................73

IDS-310AI Embedded System
Page XIII
List of BIOS Menus
BIOS Menu 1: Main.......................................................................................................................31
BIOS Menu 2: Advanced..............................................................................................................32
BIOS Menu 3: Trusted Computing..............................................................................................33
BIOS Menu 4: ACPI Settings .......................................................................................................34
BIOS Menu 5: F81803 Super IO Configuration..........................................................................35
BIOS Menu 6: Serial Port 1 Configuration Menu.......................................................................35
BIOS Menu 7: iWDD H/W Monitor ...............................................................................................36
BIOS Menu 8: USB Configuration...............................................................................................37
BIOS Menu 9: CPU Configuration...............................................................................................39
BIOS Menu 10: RTC Wake Settings............................................................................................40
BIOS Menu 11: Power Saving Configuration.............................................................................42
BIOS Menu 12: Serial Port Console Redirection.......................................................................43
BIOS Menu 13: Console Redirection Settings...........................................................................44
BIOS Menu 14: Legacy Console Redirection Settings .............................................................46
BIOS Menu 15: IEI Feature...........................................................................................................47
BIOS Menu 16: Chipset................................................................................................................48
BIOS Menu 17: North Bridge Configuration ..............................................................................49
BIOS Menu 18: Intel IGD Configuration......................................................................................49
BIOS Menu 19: LCD Control........................................................................................................51
BIOS Menu 20: South Bridge Configuration..............................................................................52
BIOS Menu 21: HD-Audio Configuration....................................................................................52
BIOS Menu 22: PCI Express Configuration ...............................................................................53
BIOS Menu 23: M2_KEYA1...........................................................................................................54
BIOS Menu 24: MPCIE1 ................................................................................................................55
BIOS Menu 25: SATA Configuration...........................................................................................56
BIOS Menu 26: Security...............................................................................................................57
BIOS Menu 27: Boot.....................................................................................................................58
BIOS Menu 28: Save & Exit..........................................................................................................60

IDS-310AI Embedded System
Page 1
Chapter
1
1 Introduction

IDS-310AI Embedded System
Page 2
1.1 Overview
Figure 1-1: IDS-310AI Embedded System
The IDS-310AI is a fanless embedded system with Intel®Celeron®J3455 SoC. The
IDS-310AI is preinstalled with 8 GB of DDR3L SO-DIMM. Storage in the system is
supported by the pre-installed 128 GB SATA DOM and the microSD slot on the side
panel.
The IDS-310AI includes three HDMI outputs supporting up to 3840 x 2160 resolutions.
Other slots and connectors include one RS-232/422/485, two GbE ports, three USB 3.2
Gen 1 (5Gb/s) ports, audio (line-out and mic-in) and one M.2 A-key 2230 slot for an
optional Wi-Fi module.
1.2 Features
The IDS-310AI has the following features
Fanless design
Intel®Celeron®J3455 SoC platform delivers an optimized balance between
performance and power consumption
Three HDMI connectors supporting triple independent display with up to
3840 x 2160 resolution
Pre-installed with a Mustang-MPCIE-MX2 accelerator card for AI inference
applications

IDS-310AI Embedded System
Page 3
Pre-installed with 128 GB SATA DOM
Two GbE LAN for high speed network applications
Three USB 3.2 Gen 1 (5Gb/s) ports
One RS-232/422/485 serial port
Support audio line-out and mic-in
RoHS compliant design
1.3 I/O Panels
The I/O panels of the IDS-310AI are shown in Figure 1-2 and Figure 1-3.
Figure 1-2: I/O Panel - Front
Figure 1-3: I/O Panel - Rear

IDS-310AI Embedded System
Page 4
1.4 Side Panel
The side panel of the IDS-310AI has one microSD slot.
Figure 1-4: Side Panel
1.5 Technical Specifications
The specifications for the IDS-310AI are listed below.
IDS-310AI
CPU Intel® Celeron® J3455 (up to 2.3 GHz, quad-core, TDP 10 W)
System Memory 1 x 204-pin DDR3L SDRAM SO-DIMM slot
(system max. 8 GB)
8 GB DDR3L SO-DIMM pre-installed
Display 3 x HDMI 1.4b connector (up to 3840x2160 @ 30Hz)
(HDMI 3 does not support audio)
Ethernet 2 x GbE LAN RJ-45 by Realtek RTL8111H GbE controller
Serial Port 1 x RS-232/422/485 DB-9 serial port
USB 3 x USB 3.2 Gen 1 (5Gb/s) port
Audio 7.1+2 channel Realtek ALC888 HD Audio codec
1 x Line-out jack
1 x Mic-in jack
Storage 128 GB SATA DOM pre-installed
1 x microSD slot (on side panel)

IDS-310AI Embedded System
Page 5
Accelerator Mustang-MPCIE-MX2 VPU accelerator card pre-installed
Expansion Slot 1 x M.2 A-key 2230 slot (PCIe x1, USB 2.0) for optional Wi-Fi
module
Wireless Optional Wi-Fi 802.11a/b/g/n/ac
Buttons and Indicators 1 x Power button
1 x Reset button
1 x AT/ATX power mode switch
1 x Power LED (green)
1 x HDD LED (yellow)
Mounting Wall mount
Power Input 12 V DC
Power Consumption 12V @ 2.6A (Intel®Celeron®J3455 with 8GB memory)
Operating Temperature -20ºC ~ +45ºC
Storage Temperature -30ºC ~ +80ºC
Operating Humidity 10% ~ 90%, non-condensing
Watchdog Timer Programmable 1~255 sec/min
Color Brown & Silver
Chassis Construction Extruded aluminum alloys
Dimensions (W x D x H) 137 mm x 102.8 mm x 49.2 mm
Operation Vibration MIL-STD-810F 514.6C-1
Operation Shock Half-sine wave shock 5G, 11ms, 100 shocks per axis
Weight (Net/Gross) 910 g / 1.7 kg
EMC CE, FCC Class A
Supported OS Microsoft Windows 10
Linux
Table 1-1: Technical Specifications

IDS-310AI Embedded System
Page 6
1.6 Dimensions
The physical dimensions of the IDS-310AI with its mounting kit are shown below.
Figure 1-5: Dimensions with Wall Mount Brackets (mm)