IEI Technology IMBA-C2260 User manual

1
ATXmotherboardsupports 22nm LGA1150Intel Xeon E3/Core™i3/
Pentium and Celeron perIntel C226, DDR3, VGA,Dual Intel PCIe
GbE, FourUSB 3.0, Six SATA6Gb/s, HD Audio, iRIS-2400 and RoHS
IMBA-C2260-i2
Quick Installation Guide
Version 1.1
Nov24, 2014.
PackageList
IMBA-C2260-i2packageincludes the followingitems:
l1xIMBA-C2260-i2singleboardcomputer
l1xI/O shielding(P/N: 45014-0034C0-00-RS)
l2xSATA cable
l1xUtilityCD
l1xQIG (QuickInstallation Guide)
2006 Copyright byIEI Integration corp.
Allrightsreserved.

2
Specifications
lCPU:
LGA1150 Intel®Xeon®E3/Core™i3/Pentium®or Celeron®
processor supported
lSystemChipset: Intel®C226
lMemory:
Four 240-pin1600/1333MHzdual-channelDDR3SDRAM
ECCandnon-ECC unbuffered DIMMssupported(systemmax.
32GB)
lBIOS: UEFI BIOS
lGraphicEngine:
Intel®HDGraphics Gen 7.5support forDX11.1and OpenCL
1.2, OpenGL3.2FullMPEG2, VC1, AVC Decode
lDisplayOutput:
VGA(Upto1920x1200 @60 Hz)
iDPinterface for HDMI, LVDS, VGA, DVI, DP
(Upto3840x2160 @60Hz)
lEthernet:
LAN1: Intel®I210 PCIecontroller
LAN2: Intel®I217LM withIntel®AMT9.0support
lSuper IO: FintekF81866
lEC: IWDD
lDigitalI/O: 8-bit digitalI/O (4-bit input / 4-bit output)
lAudio:
RealtekALC662HDAudiocodec(Line-in, Line-out, Mic)
lI/O Interface:
5xRS-232
1xRS-422/485
6xSATA 6Gb/s
1xLPT
4xUSB3.0(rear IO)
8xUSB2.0(4xrear IO, 4bypinheader)

3
1xmSATA(colaySATAport)
1x6-pinwafer for PS/2KB/MS
lWatchdog Timer:
Softwareprogrammablesupport 1~255sec. system reset
lFAN:
1x4-pinCPUfan connector
2x3-pinsystemfan connectors
lFront Audio:
1x10-pin(2x5) header
lFront Panel:
1xFront Panel
(PowerLED,HDDLED,Speaker, PowerButton,ResetButton)
lLANLED: 2x2-pin(1x2) header for LAN1LED, LAN2LED
lTPM: 1x20-pin(2x10) header
lSMBus: 1x4-pin(1x4) wafer
lI2C: 1x4-pin(1x4) wafer
lIPMI: 1xDDR3SO-DIMM slot supportsiRIS-2400
lExpansion:
2xPCI slots
1xPCIex1slot
3xPCIex4slots(support PCIex1)
1xPCIex16 slot (withx8 signal)
lPower supply: ATXPowerSupply
lPower Consumption:
3.3V@0.57A, 5V@4.50A,12V@0.14A, Vcore@5.20A,
5VSB@0.19A
(Intel®3.10GHzCPU withfour1333MHz2GBDDR3memory)
lOperationTemperature: -20°C~60°C
lOperationHumidity: 5%~ 95%, non-condensing
lDimensions: 244mmx305mm
lWeight GW/NW: 1200g/ 700g

4
Ordering Information
lIMBA-C2260-i2-R11:
ATXmotherboard supports22nmLGA1150 Intel®Xeon E3/
Core™i3/Pentium®andCeleron®perIntel®C226, DDR3, VGA,
DualIntel®PCIe GbE, fourUSB3.0, sixSATA6Gb/s,HD Audio,
iRIS-2400 and RoHS
l19800-003100-200-RS: DualportsUSBcablewith bracket
l19800-010500-100-RS: USB3.0 cablewith bracket
l32205-003800-100-RS: RS-422/485 cable, 200mm
l19800-000051-RS: RS-232 cable, 230mm(P=2.54)
l32102-000100-200-RS:
SATApowercable,MOLEX 5264-4PtoSATA15P
l19800-000075-RS: PS/2 KB/MSY-cable with bracket, 220mmz
l19800-000049-RS: LPTCable
lCF-1156A-RS-R11:
Highperformance LGA1155/LGA1156 coolerkit, 1U chassis
compatible, 73W
lCF-1156E-R11:
Highperformance LGA1155/LGA1156 coolerkit, 95W
lDP-LVDS-R10:
DisplayPort to 24 bit dualchannelLVDSconverterboard
(ForiEiIDPconnector)
lDP-HDMI-R10:
DisplayPort to HDMI converterboard (ForiEiIDPconnector)
lDP-DVI-R10:
DisplayPort to DVI-D converterboard (ForiEiIDPconnector)
lDP-VGA-R10:
DisplayPort to VGAconverterboard(ForiEi IDPconnector)
lDP-DP-R10:
DisplayPort to DisplayPortconverterboard (ForiEiIDPconnector)
lTPM-IN01-R11: 20-Pin InfineonTPM module, software management
tool, firmware V3.17

5
Jumperssetting and connectors
LABEL FUNCTION
J_ATX_AT1 AT/ATXmode select switch
J_CMOS1 ClearCMOSbutton
PCIEx16 Power PCIEX16 channelmode setting
USBSW1, USB SW2USBpowersetting
J_FLASH1 Flash descriptorsecurityoverride
BAT1 Batteryconnector
CHASSIS1 Chassisstatusconnector
CPU_FAN1 CPU fan connector
CPU12V1 +12Vpowersource connector
ATX1 24-pin ATXpowersource connector
CHA_DIMM1, CHA_DIMM2
CHB_DIMM1, CHB_DIMM2
DDR3 DIMM slots
DIO1 DigitalI/Oconnector
DP1 Displayport connector
F_PANEL1 Front panelconnector
FRONT_PANEL1 Front panelaudio connector
IPMI1 Collocation IPMI module(iRIS-2400)
CN5 I2C connector
KB_MS1 Keyboard and mouse connector
LED_LAN1 LAN1linkLED connector
LED_LAN2 LAN2linkLED connector
LPT1 Parallelport connector
CN2 M-SATAcard connector
COM2, COM3,COM5,COM6 InternalRS-232 serialportconnectors
COM4 InternalRS-422/485 serialport connector
SATA1, SATA2, SATA3
SATA4, SATA5, SATA6 SerialATA3.0 connectors
CN1 SMBUSconnector
SPDIF1 SPDIFconnector
SYS_FAN1, SYS_FAN2Systemfan connector
TPM1 TPM connector
USB1, USB2 InternalUSB2.0connectors

6
CN4 InternalUSB3.0connector
AUDIO_CV1 HD audioconnector
LAN1_USB1RJ45 LAN and USB3.0 connectors
LAN2_USB2 RJ45 LAN and USB3.0 connectors
K/M_USB1 Keyboard &Mouse and USB2.0 connectors
CNUSB1 USB2.0connectors
VGACOM1 VGAand RS-232 serialport connectors
PCIEx16 Power:PCIEX16 channelmode setting
PCIEx16 DESCRIPTION
1 x16 PCIE(default) 1 x16 PCIE
2 x8 PCIE 2 x8 PCIE
1 x8 , 2x4PCIE 1 x8 , 2x4PCIE
Aptio Setup Utility Copyright (C) 2012 American Megatrends, Inc.
Chipset
Auto Power Button Status [Disabled(ATX)]
Restore AC Power Loss [Last State]
> PCI Express Configuration
> PCI Azalia Configuration
Power Saving Function(ERP) [Disabled]
PCIEX16 Power [1 x16 PCIE]
USB SW1 [+5V DUAL]
USB SW2 [+5V DUAL]
------------------
Version 2.15.1236. Copyright (C) 2012 American Megatrends, Inc.
J_CMOS1:ClearCMOSbutton
PIN NO. DESCRIPTION
NC (default)
Keep CMOSSetup
(NormalOperation)
Press button ClearCMOSSetup
J_ATX_AT1:AT/ATXmode selectswitch
PIN NO. DESCRIPTION
Short1 -2 ATXMode (default)
Short2 -3 ATMode

7
CHASSIS1:Chassisstatus connector
PIN NO. DESCRIPTION PIN NO. DESCRIPTION
1 +3.3VSB 2 CHASSISOPEN
J_FLASH1:Flashdescriptorsecurityoverride
PIN NO. DESCRIPTION
Short1 -2 Disabled (default)
Short2 -3 Enabled
USBSW1, USBSW2:USB powersetting
PCIEx16 DESCRIPTION
+5VDUAL (default) +5VDUAL
+5V +5V
Aptio Setup Utility Copyright (C) 2012 American Megatrends, Inc.
Chipset
Auto Power Button Status [Disabled(ATX)]
Restore AC Power Loss [Last State]
> PCI Express Configuration
> PCI Azalia Configuration
Power Saving Function(ERP) [Disabled]
PCIEX16 Power [1 x16 PCIE]
USB SW1 [+5V DUAL]
USB SW2 [+5V DUAL]
------------------
Version 2.15.1236. Copyright (C) 2012 American Megatrends, Inc.
BAT1:Battery connector
PIN NO. DESCRIPTION PIN NO. DESCRIPTION
1 VBATT 2 GND
CPU_FAN1:CPU fanconnector
PIN NO. DESCRIPTION PIN NO. DESCRIPTION
1
GND
2
+12V
3
FANIO
4
PWM

8
ATX1:24-pinATXpowersource connector
PIN NO. DESCRIPTION PIN NO. DESCRIPTION
1 +3.3V 13 +3.3V
2 +3.3V 14 -12V
3 GND 15 GND
4 +5V 16 PS_ON
5 GND 17 GND
6 +5V 18 GND
7 GND 19 GND
8 Powergood 20 -5V
9 5VSB 21 +5V
10 +12V 22 +5V
11 +12V 23 +5V
12 +3.3V 24 GND
CPU12V1:+12Vpowersource connector
PIN NO. DESCRIPTION PIN NO. DESCRIPTION
1
GND
2
GND
3
+12V
4
+12V
DIO1:Digital I/Oconnector
PIN NO. DESCRIPTION PIN NO. DESCRIPTION
1
GND
2
VCC
3
Output 3
4
Output 2
5
Output 1
6
Output 0
7
Input3
8
Input2
9
Input1
10
Input0

9
FRONT_PANEL1:Front audioconnector
PIN NO. DESCRIPTION PIN NO. DESCRIPTION
1
MIC2-L
2
GND
3
MIC2
-
R
4
Presence#
5
LINE2
-
R
6
MIC2-JD
7
FRONT-IO 8 NC
9
LINE2-L
10
LINE2
-
JD
F_PANEL1:Front panel connector
PIN DESCRIPTION PIN DESCRIPTION
PWR
LED
1
+5V
2
BEEP_PWR SPKR
3
NC
4
IPMI ID_LED+
IPMI LED
5
GND
6
IPMI ID_LED-
PWR
BTN
7
PWRBTN_SW#
8
PC_BEEP SPKR
9
GND
10
NC RESET
HDD
LED
11
+5V
12
EXTRST-
13
SATA_LED#
14
GND
DP1:Display portconnector
PIN NO. DESCRIPTION PIN NO. DESCRIPTION
1
+5V
2
LANE1N
3
LANE1P
4
GND
5
LANE3N
6
LANE3P
7
GND
8
AUX_CTRL_DET_D
9
GND
10
HPD
11
AUXP
12
AUXN
13
GND
14
LANE2P
15
LANE2N
16
GND
17
LANE0P
18
LANE0N
19
+3.3V
20
NC

10
LED_LAN2:LAN2 link LED connector
PIN NO. DESCRIPTION PIN NO. DESCRIPTION
1 +3.3V 2 LAN2_LED_LNK#_ACT
LED_LAN1:LAN1 link LED connector
PIN NO. DESCRIPTION PIN NO. DESCRIPTION
1 +3.3V 2 LAN1_LED_LNK#_ACT
LPT1:Parallel portconnector
PIN NO. DESCRIPTION PIN NO. DESCRIPTION
1
STROBE#
2
DATA0
3
DATA1
4
DATA2
5
DATA3
6
DATA4
7
DATA5
8
DATA6
9
DATA7
10
ACKNOWLEDGE
#
11
BUSY
12
PAPER EMPT
Y
13
PRINTERSELECT
14
AUTOFORM FEED#
15
ERROR#
16
INITIALIZE
#
17
PRINTERSELECTLN#
18
GND
19
GND
20
GND
21
GND
22
GND
23
GND
24
GND
25
GND
26
NC
CN5:I2C connector
PIN NO. DESCRIPTION PIN NO. DESCRIPTION
1
GND 2 PCH_GP38
3
PCH_GP39 4 +5V
KB_MS1:Keyboardand mouse connector
PIN NO. DESCRIPTION PIN NO. DESCRIPTION
1 VCC 2 MSDATA
3 MSCLK 4 KBDATA
5 KBCLK 6 GND

11
CN2:M-SATAcardconnector
PIN NO. DESCRIPTION PIN NO. DESCRIPTION
1
PCIE_WAKE#
2
+3.
3
V
3
N/C
4
GND
5
N/C
6
1.5V
7
N/C
8
N/C
9
GND
10
N/C
11
MSATA_CLK#
12
N/C
13
MSATA_CLK
14
N/C
15
GND
16
N/C
17
PLTRST_N
18
GND
19
N/C
20
+3.
3
V
21
GND
22
PLTRST_N
23
SATA_RX+
24
+3.
3
V
25
SATA_RX
-
26
GND
27
GND
28
1.5V
29
GND
30
SMB
_
CLK
31
SATA_TX
-
32
SMB
_
DATA
33
SATA_TX+
34
GND
35
GND
36
USB
_
D
ATA
-
37
GND
38
USB
_
D
ATA
+
39
+3.
3
V
40
GND
41
+3.
3
V
42
N/C
43
+3.
3
V
44
N/C
45
C
LINK
_CLK
46
N/C
47
CL
INK
_DATA
48
1.5V
49
CL
INK
_RST#
50
GND
51
MSATA_DET
52
+3.
3
V

12
COM4:RS-422/485serial portconnector
PIN NO. DESCRIPTION PIN NO. DESCRIPTION
1RXD485# 2 RXD485+
3TXD485+ 4 TXD485#
COM2, COM3, COM5, COM6:Internal RS-232 serial portconnectors
Function PIN DESCRIPTION PIN DESCRIPTION
COM2
1 DCD 2 DSR
3 RXD 4 RST
5 TXD 6 CTS
7 DTR 8 RI
9 GND 10 GND
COM3
11 DCD 12 DSR
13 RXD 14 RST
15 TXD 16 CTS
17 DTR 18 RI
19 GND 20 GND
COM5
21 DCD 22 DSR
23 RXD 24 RST
25 TXD 26 CTS
27 DTR 28 RI
29 GND 30 GND
COM6
31 DCD 32 DSR
33 RXD 34 RST
35 TXD 36 CTS
37 DTR 38 RI
39 GND 40 GND

13
SYS_FAN1, SYS_FAN2:Systemfanconnector
PIN NO. DESCRIPTION PIN NO. DESCRIPTION
1
FANIO
2
+12V(PWM)
3
GND
SPDIF1:SPDIFconnector
PIN NO. DESCRIPTION PIN NO. DESCRIPTION
1
+5V
2
NC
3
SPDIF
OUT
4
GND
5
SPDIF
IN
CN1:SMBUSconnector
PIN NO. DESCRIPTION PIN NO. DESCRIPTION
1
GND
2
SMB_DATA
3
SMB_CLK
4
+5V
SATA1
,
SATA
2,
SATA
3,
SATA
4
,
SATA
5
,
SATA
6
:
Serial ATA3.0
connectors
PIN NO. DESCRIPTION PIN NO. DESCRIPTION
1GND 2 SATA_TX+
3SATA_TX- 4 GND
5 SATA_RX- 6 SATARX+
7 GND
TPM1:TPMconnector
PIN NO. DESCRIPTION PIN NO. DESCRIPTION
1
LCLK
2
GND
3
LFRAME#
4
NC
5
LRERST#
6
+5V
7
LAD3
8
LAD2
9
+3.3V
10
LAD1
11
LAD0
12
GND
13
SCL
14
SDA
15
SB3V
16
SERIRQ
17
GND
18
GLKRUN#
19
LPCPD#
20
LDRQ#

14
CN4:Internal USB 3.0 connector
PIN NO. DESCRIPTION PIN NO. DESCRIPTION
1 VCC 2 USB3_RX-
3 USB3_RX+ 4 GND
5 USB3_TX- 6 USB3_TX+
7 GND 8 USB_DATA-
9 USB_DATA+ 10 NC
11 USB_DATA+ 12 USB_DATA-
13 GND 14 USB3_TX+
15 USB3_TX- 16 GND
17 USB3_RX+ 18 USB3_RX-
19 VCC 20 NC
USB1,USB2:Internal USB 2.0 connectors
PIN NO. DESCRIPTION PIN NO. DESCRIPTION
1 VCC 2 GND
3 USB_DATA- 4 USB_DATA+
5 USB_DATA+ 6 USB_DATA-
7 GND 8 VCC

15
K/M_USB1:Keyboard& Mouse and USB 2.0connectors
USB1:External USB2.0 connectors
PIN NO. DESCRIPTION PIN NO. DESCRIPTION
1 VCC 5 VCC
2 USB_DATA- 6 USB_DATA-
3 USB_DATA+ 7 USB_DATA+
4 GND 8 GND
KB_MS1:Keyboard/ Mouse connector
PIN NO. DESCRIPTION PIN NO. DESCRIPTION
9 GND 10 KEYBOARD DATA
11 MOUSEDATA 12 VCC
13 KEYBOARD CLOCK 14 MOUSECLOCK
LAN1_USB1,LAN2_USB2:Ethernetand USB3.0connectors
USB1:External USB3.0 connectors
PIN NO. DESCRIPTION PIN NO. DESCRIPTION
1 VCC 10 VCC
2 USB_DATA- 11 USB_DATA-
3 USB_DATA+ 12 USB_ DATA+
4 GND 13 GND
5 USB3_RX- 14 USB3_RX-
6 USB3_RX+ 15 USB3_ RX+
7 GND 16 GND
8 USB3_TX- 17 USB3_TX-
9 USB3_TX+ 18 USB3_TX+
LAN1:RJ45 LANconnector
PIN NO. DESCRIPTION PIN NO. DESCRIPTION
20 LAN1_MDI0P 24 LAN1_MDI2P
21 LAN1_MDI0N 25 LAN1_MDI2N
22 LAN1_MDI1P 26 LAN1_MDI3P
23 LAN1_MDI1N 27 LAN1_MDI3N

16
CNUSB1:USB 2.0 connectors
PIN NO. DESCRIPTION PIN NO. DESCRIPTION
1 VCC 5 VCC
2 USB_DATA- 6 USB_DATA-
3 USB_DATA+ 7 USB_DATA+
4 GND 8 GND
VGACOM1:VGAand RS-232 serial portconnectors
VGA:VGAconnector
PIN NO. DESCRIPTION PIN NO. DESCRIPTION
1 RED 2 GREEN
3 BLUE 4 NC
5 GND 6 GND
7 GND 8 GND
9 VCC 10 GND
11 NC 12 DDCDA
13 HSYNC 14 VSYNC
15 DDCCLK
COM1:External RS-232 serialportconnector
1
DCD
1
2
RXD
1
3
TXD
1
4
DTR
1
5
GND
1
6
DSR
1
7
RTS
1
8
CTS
1
9
RI
1

17
Board Layout:Jumperand Connector Locations
(Unit:mm)