IEI Technology KINO-TGL-U User manual

Mini-ITX SBC Supports 11th Gen Intel® Core™ i7/i5/i3 or Celeron®
Processor (Tiger Lake-UP3 Mobile), 9V~36V DC Input, Quadruple
Independent Display, HDMI, DP, IEI eDP Module, SATA 6Gb/s,
Dual Intel® 2.5GbE, USB 3.2 Gen 2, M.2 and RoHS
KINO-TGL-U
Quick Installation Guide
Version 1.0
February 21, 2022
Package List
KINO-TGL-U package includes the following items:
1 x KINO-TGL-U single board computer with CPU cooler
1 x SATA cable
1 x I/O shielding
1 x QIG
© 2022 Copyright by IEI Integration Corp.
All rights reserved.

2
Specifications
CPU:
11th Gen. Intel® mobile Tiger Lake-UP3 on-board processor:
Intel® Core™ i7-1185G7E (up to 4.4GHz, quad-core, 12M cache,
TDP=28/15/12W)
Intel® Core™ i5-1145G7E (up to 4.1GHz, quad-core, 8M cache,
TDP=28/15/12W)
Intel® Core™ i3-1115G4E (up to 3.9GHz, dual-core, 6M cache,
TDP=28/15/12W)
Intel® Celeron® 6305E (up to 1.8GHz, dual-core, 4M cache,
TDP=15W)
Memory:
Two 260-pin 3200 MHz DDR4 SDRAM SO-DIMM slots supporting
up to 64 GB memory
BIOS:
AMI UEFI BIOS
Graphics Engine:
Intel® HD Graphics Gen 12 Gfx; up to 96EU; 2VDbox; AI (INT8),
HDMI 2.0 integrated, 4 display pipes, 8k60210b; AV1 codec, 12b
support, E2E compression, IPU6 FF
Display Outputs:
Three 4K independent display
1 x HDMI 2.0b (up to 4096 x 2160 @ 30 Hz)
1 x DP 1.4a (up to 4096 x 2160 @ 60 Hz)
1 x IEI IDPM 3040 slot (only for IEI eDP/LVDS/VGA module)
Ethernet:
LAN1: Intel® I225V 2.5GbE controller
LAN2: Intel® I225V 2.5GbE controller
External I/O Interface:
4 x USB 3.2 Gen 2 (10Gb/s) (Type-A)
Internal I/O Interface:
2 x USB 2.0 (2x4 pin, p=2.0)
4 x RS-232 (2x5 pin, p=2.0)

3
1 x RS-232/422/485 (2x5 pin, p=2.0) (support Auto Flow Control
over RS-485)
1 x RS-422/485 (1x4 pin, p=2.0) (support Auto Flow Control over
RS-485)
2 x SATA 6Gb/s
Audio:
1 x IAUDIO connector supporting IEI AC-KIT-888S audio module
(2x5 pin, p=2.0)
Front Panel:
1 x Front panel (2x7 pin, p=2.54; power LED, HDD LED, speaker,
power button, reset button)
LAN LED:
2 x LAN LED (1x2 pin, p=2.0)
Expansions:
1 x PCIe x8 slot (x4 signal, open-ended slot)
1 x M.2 2242/2280 M-key (PCIe x2)
1 x M.2 2230 A-key (PCIe x1 & USB 2.0)
Digital I/O:
1 x 12-bit digital I/O (2x7 pin, p=2.0)
TPM
Intel® PTT (TPM 2.0)
SMBus:
1 x SMBus (1x4 pin, p=1.25)
I2C:
1 x I2C (1x4 pin, p=1.25)
Fan Connector:
1 x CPU fan connector (1x4 pin)
1 x System fan connector (1x4 pin)
Power Supply:
9V –36V DC power input
1 x Internal power connector (2x2 pin)
1 x External DC jack (Ø 5.5 mm)
Support AT/ATX mode

4
ErP/EuP compliant
Power Consumption:
[email protected], [email protected], [email protected], 36[email protected]9A
(Intel® Core™ i7-1185G7E CPU with one 8 GB 2933 MHz DDR4
SO-DIMM)
Watchdog Timer:
Software programmable support 1–255 sec. system reset
Operation Temperature: 0°C –60°C
Storage Temperature: -30°C –70°C
Operation Humidity: 5% –95%, non-condensing
Dimensions: 170 mm x 170 mm
Weight: GW:900 g / NW:400 g
Safety: CE/FCC compliant
All the drivers and utility for the KINO-
TGL-U are available on IEI Resource
Download Center. Type KINO-TGL-U
and press Enter to find all the relevant
software, utilities, and documentation.
To install software from the
downloaded ISO file, mount the file as
a virtual drive to view its content.
IEI Resource Download Center
https://download.ieiworld.com

5
Ordering Information
KINO-TGL-U-i7-R10:
Mini-ITX SBC supports 11th Gen Intel® Core™ i7-1185G7E
processor, DDR4 SO-DIMM, 9V~36V DC input, quad display, SATA,
dual Intel® 2.5GbE, USB 3.2, M.2, and RoHS
KINO-TGL-U-i5-R10:
Mini-ITX SBC supports 11th Gen Intel® Core™ i5-1145G7E
processor, DDR4 SO-DIMM, 9V~36V DC input, quad display, SATA,
dual Intel® 2.5GbE, USB 3.2, M.2, and RoHS
KINO-TGL-U-i3-R10:
Mini-ITX SBC supports 11th Gen Intel® Core™ i3-1115G4E
processor, DDR4 SO-DIMM, 9V~36V DC input, quad display, SATA,
dual Intel® 2.5GbE, USB 3.2, M.2, and RoHS
KINO-TGL-U-C-R10:
Mini-ITX SBC supports Intel® Celeron® 6305 processor, DDR4
SO-DIMM, 9V~36V DC input, quad display, SATA, dual Intel®
2.5GbE, USB 3.2, M.2, and RoHS
AC-KIT-888S-R10:
Realtek ALC888S 7.1 Channel HD Audio peripheral board, RoHS
32001-008600-200-RS:
Dual-port USB cable, 210mm, p=2.0
32102-000100-200-RS:
SATA power cable, MOLEX 8981-4M to SATA15P, 150mm
32205-002700-200-RS:
RS-232/422/485 cable, 200mm, p=2.0

6
Jumpers Setting and Connectors
LABEL
FUNCTION
J_ATX_AT1
AT/ATX power mode setting
J_CMOS1
Clear CMOS jumper
ME_FLASH1
Flash descriptor security override jumper
BAT1
RTC battery connector
IAUDIO
Internal audio connector for IEI audio module
IDPM
IEI IDPM slot (for IEI eDP/LVDS/VGA module)
DIMM1, DIMM2
DDR4 SO-DIMM slots
CN1
Internal power input connector
DIO1
Digital I/O connector
DEBUG_SPI1
EC debug connector
CPU/FAN1, SYS/FAN1
Fan connectors
F_PANEL1
Front panel connector
JI2C1
I2C connector
JP1
LAN1 link LED connector
JP2
LAN2 link LED connector
COM1, COM2,
COM3, COM4
RS-232 serial port connectors
COM5
RS-232/422/485 serial port connector
COM6
RS-422/485 serial port connector
SATA1, SATA2
SATA 6Gb/s connectors
SATA_PWR1,
SATA_PWR2
SATA power connectors
JSMB1
SMBus connector
JBIOS1
Flash SPI ROM connector
JEC2
Flash EC ROM connector
USB2_CN1
Internal USB 2.0 connector
M2_AE1
M.2 A-key slot
M2_M1
M.2 M-key slot
PCIE1
PCIe x8 slot (x4 signal)
PWR_SW1
Onboard power button
PWR1
External power jack
LAN1, LAN2
External 2.5GbE RJ-45 connectors
USB_CON1, USB_CON2
External dual USB 3.2 Gen 2 connectors

7
HDMI1
External HDMI connector
DP1
External DisplayPort connector
J_ATX_AT1: AT/ATX Power Mode Setting
PIN NO.
DESCRIPTION
Short 1 - 2
ATX Power Mode (default)
Short 2 - 3
AT Power Mode
J_CMOS1: Clear CMOS Jumper
Status
DESCRIPTION
N/C
Keep CMOS Setup
(Normal Operation)
Press button
Clear CMOS Setup
ME_FLASH1: Flash Descriptor Security Override Jumper
PIN NO.
DESCRIPTION
Open
Disabled (default)
Short
Enabled
IAUDIO: Internal Audio Connector for IEI Audio Module
PIN NO.
DESCRIPTION
PIN NO.
DESCRIPTION
1
HDA_SYNC
2
HDA_BIT_CLK
3
HDA_SDOUT
4
HDA_SPKR
5
HDA_SDIN
6
HDA_RST#
7
HDA_VCC
8
HDA_GND
9
HDA_+12V
10
HDA_GND
CN1: Internal Power Input Connector
PIN NO.
DESCRIPTION
PIN NO.
DESCRIPTION
1
GND
3
VIN
2
GND
4
VIN

8
DIO1 : Digital Input/Output Connector
PIN NO.
DESCRIPTION
PIN NO.
DESCRIPTION
1
GND
2
+5V
3
Output 5
4
Output 4
5
Output 3
6
Output 2
7
Output 1
8
Output 0
9
Input 5
10
Input 4
11
Input 3
12
Input 2
13
Input 1
14
Input 0
DEBUG_SPI1: EC Debug Connector
PIN NO.
DESCRIPTION
PIN NO.
DESCRIPTION
1
NC
2
EDICS
3
EDIDO
4
EDICLK
5
EDIDI
6
GND
CPU/FAN1: CPU Fan Connector
PIN NO.
DESCRIPTION
PIN NO.
DESCRIPTION
1
GND
2
+12V
3
Rotation Signal
4
PWM Control Signal
SYS/FAN1:System Fan Connector
PIN NO.
DESCRIPTION
PIN NO.
DESCRIPTION
1
GND
2
+12V
3
Rotation Signal
4
PWM Control Signal
JI2C1: I2C Connector
PIN NO.
DESCRIPTION
PIN NO.
DESCRIPTION
1
GND
3
I2C_CLK
2
I2C_DATA
4
+5V

9
JSMB1: SMBus Connector
PIN NO.
DESCRIPTION
PIN NO.
DESCRIPTION
1
GND
3
SMB_CLK
2
SMB_DATA
4
+5V
F_PANEL1: Front Panel Connector
PIN
DESCRIPTION
PIN
DESCRIPTION
PWR
LED
1
PWR_LED+
2
BEEP_PWR
SPKR
3
NC
4
NC
5
PWR_LED-
6
NC
PWR
BTN
7
PWR_BTN+
8
PC_BEEP
9
PWR_BTN-
10
NC
HDD
LED
11
HDD_LED+
12
Reset+
RESET
13
HDD_LED-
14
Reset-
JP1: LAN1 Link LED Connector
PIN
DESCRIPTION
PIN
DESCRIPTION
1
+3.3V
2
LAN1_LED_LNK#_ACT
JP2: LAN2 Link LED Connector
PIN
DESCRIPTION
PIN
DESCRIPTION
1
+3.3V
2
LAN2_LED_LNK#_ACT
COM1, COM2, COM3, COM4: RS-232 Serial Port Connectors
PIN NO.
DESCRIPTION
PIN NO.
DESCRIPTION
1
DCD
2
DSR
3
RXD
4
RTS
5
TXD
6
CTS
7
DTR
8
RI
9
GND
10
GND

10
COM5: RS-232/422/485 Serial Port Connector
PIN NO.
DESCRIPTION
PIN NO.
DESCRIPTION
1
DCD
2
DSR
3
RXD
4
RTS
5
TXD
6
CTS
7
DTR
8
RI
9
GND
10
GND
COM6: RS-422/485 Serial Port Connector
PIN NO.
RS-422
RS-485
1
RXD-
-
2
RXD+
-
3
TXD+
DATA+
4
TXD-
DATA-
SATA1, SATA2: SATA 6Gb/s Connectors
PIN NO.
DESCRIPTION
PIN NO.
DESCRIPTION
1
GND
5
SATA_RX‐
2
SATA_TX+
6
SATA RX+
3
SATA_TX‐
7
GND
4
GND
8
N/C
SATA_PWR1, SATA_PWR2: SATA Power Connectors
PIN NO.
DESCRIPTION
PIN NO.
DESCRIPTION
1
+5V
2
GND