IEI Technology KINO-DBT Series User manual

1
Mini-ITX SBC with Intel® 22nm Atom SoC processors, VGA / DVI-D /
iDP, USB 3.0, SATA, HD Audio, RoHS
KINO-DBT
Quick Installation Guide
Version 1.0
Feb 19, 2016.
Package List
KINO-DBT package includes the following items:
 1 x KINO-DBT single board computer
 1 x SATA cable with power output cable
 1 x IO shielding (P/N: 45014-0056C0-00-RS)
 1 x QIG (Quick Installation Guide)
 1 x Utility CD
©2006 Copyright by IEI Integration corp.
All rights reserved.

2
Specifications
 SoC:
Intel® Atom™ E3845 on-board SoC (1.91GHz, quad-core,
2MB cache, TDP=10W)
Intel® Atom™ E3827 on-board SoC (1.75GHz, dual-core, 1MB
cache, TDP=8W)
Intel® Atom™ E3826 on-board SoC (1.46GHz, dual-core, 1MB
cache, TDP=7W)
Intel® Atom™ E3825 on-board SoC (1.33GHz, dual-core, 1MB
cache, TDP=6W)
Intel® Atom™ E3815 on-board SoC (1.46GHz, single-core,
512KB cache, TDP=5W)
Intel® Celeron® J1900 on-board SoC (2GHz, quad-core, 2MB
cache, TDP=10W)
Intel® Celeron® N2930 on-board SoC (1.83GHz, quad-core,
2MB cache, TDP=7.5W)
Intel® Celeron® N2807 on-board SoC (1.58GHz, dual-core,
2MB cache, TDP=4.5W)
 BIOS: AMI UEFI BIOS
 Memory:
Two 204-pin 1066/1333 MHz dual-channel unbuffered DDR3L
SDRAM SO-DIMM support up to 8 GB (J1900, N2930, E3845,
E3827, E3826)
One 204-pin 1066/1333 MHz dual-channel unbuffered DDR3L
SDRAM SO-DIMM supports up to4 GB (N2807, E3825, E3815)
Graphics Engine:
4th Gen 7 Graphics Engines with 4 execution unit, DX11, OGL
4.0, ES 2.0, OpenCL 1.2 support
 Display Output:
Dual Independent Displays
1 x VGA (Resolution: 2560x1200)
1 x DVI-D
1 x iDP
 Ethernet: Dual Realtek RTL8111E PCIe GbE controller

3
 External I/O Interface:
2 x RS-232
2 x USB2.0
2 x USB3.0
 Internal I/O Interface:
1 x KB/MS (1 x 6 pin)
1 x mSATA share with SATA port II
1 x RS-422/485 (1 x 4 pin, P=2.0)
2 x SATA 3Gb/s with 5V, 12 V SATA power connector
5 x RS-232 (2 x 5 pin, P=2.54)
4 x USB2.0 (2 x 4 pin, P=2.0)
 TPM: 2 x 10-pin pinheader
 SMBus: 1 x 4-pin (1x4) wafer
 Audio: Realtek ALC662 HD codec supports 5.1 channel
 Front Panel:
1 x Front panel (2x7 pin, Power LED, HDD LED, Speaker,
Power Button, Reset Button)
 LAN LED: 2 x 2-pin (1x2) header
 Expansion :
1 x full-size PCIe Mini card slot
1 x PCIe x4 slot (with PCIe x1 signal)
1 x microSD slot (E38XX SKU only)
 Digital I/O: 8-bit digital I/O (2x5 pin)
 Fan Connector:
1 x 4-pin CPU fan connector
1 x 4-pin system fan connector
 Watchdog Timer:
Software programmable support 1~255 sec. system reset
 Power supply:
12V DC input
1 x External 4-pin DIN DC jack
1 x Internal 4-pin (2x2) power connector

4
 Power Consumption: 12V@1.64A (Intel® Atom™ J1900, 4GB
DDR3 1333 LV Memory)
 Operating Temperature: -20°C ~ 70°C
 Storage Temperature: -30°C ~ 85°C
 Operation Humidity: 5% ~ 95%, non-condensing
 Dimensions: 170mm x 170mm
 Weight(GW/ NW): 900g/400g
Ordering Information
 KINO-DBT-J1900-R10:
Mini-ITX SBC supports Intel® Celeron® Quad-Core Processor
J1900(10W), VGA/DVI/iDP, Dual Realtek® PCIe GbE, USB 3.0,
SATA, HD Audio, RoHS
 KINO-DBT-N29301-R10:
Mini-ITX SBC supports Intel® Celeron® Quad-Core Processor
N2930(7.5W), VGA/DVI/iDP, Dual Realtek® PCIe GbE, USB 3.1,
SATA, HD Audio, RoHS
 KINO-DBT-N28071-R10:
Mini-ITX SBC supports Intel® Celeron® Dual-Core Processor
N2807(4.3W), VGA/DVI/iDP, Dual Realtek® PCIe GbE, USB 3.2,
SATA, HD Audio, RoHS
 KINO-DBT-E38XX1-R10:
Mini-ITX SBC supports Intel® Celeron® Processor E3845(10W)/
E3827(8W)/ E3826(7W)/ E3825(6W)/ E3815(5W), VGA/DVI/iDP,
Dual Realtek® PCIe GbE, USB 3.3, SATA, HD Audio, RoHS (by
request MOQ: 100pcs/lot)

5
 32205-002700-100-RS:
RS-232 CABLE ;2;200MM;D-SUB 9, 2*5P P=2.0
 32006-000300-100-RS: PS/2 KB/MS Y-cable without bracket
 32205-003800-300-RS: RS-422/485 cable, 200mm
 DP-LVDS-R10:
DisplayPort to 24-bit dual-channel LVDS converter board
(for IEI iDP connector)
 DP-DVI-R10:
DisplayPort to DVI-D converter board (for IEI iDP connector)
 DP-VGA-R10:
DisplayPort to VGA converter board (for IEI iDP connector)
 DP-DP-R10:
DisplayPort to DisplayPort converter board (for IEI iDP connector)
 DP-HDMI-R10:
DisplayPort to HDMI converter board (for IEI iDP connector)
 TPM-IN01-R11:
20-pin Infineon TPM module, software management tool,
firmware V3.17

6
Jumpers setting and connectors
LABEL FUNCTION
J_CMOS1 Clear CMOS
J_ATX_AT1 AT/ATX Power Mode Setting
USB SW1 Power
USB SW2 Power USB Power Setting
MSATA_SW1 MSATA Selection
F_PANEL1 PWR & RST Buttons and indicators
VIDEO1 VGA 15-pin Female Connector
VIDEO1 DVI-D Connector
DP1 DP Connector
LAN1_USB1 RJ45 LAN and USB 3.0 Connector
LAN2_USB2 RJ45 LAN and USB 2.0 Connector
KB_MS1 6Pin-header Keyboard & Mouse Connector
USB1
USB2 Internal Pin-header 4 USB2.0 Connectors
COM1-2 External Serial Port DB-9 Connector
COM3
COM5-6 Internal Serial Port Connectors
COM4 Internal Serial Port RS422/RS485 Connector
AUDIO_CV1 HD Audio Connector
FRONT_PANEL1 Front Panel Audio Connector
SPDIF1 SPDIF Connector
SATA1
SATA2 SATA 3Gb/s Drive Connectors
CN8 Mini PCI-E Card Connector
CPU_FAN1 CPU Fan Connector
SYS_FAN1 System Fan Connectors
DIO1 Digital I/O Connector
CN2 Power Source Connector
TPM1 TPM Connector
SATA_PWR1,2 Serial ATA Power Connectors
CN9 EC Debug Port Connector
JSPI1 Flash SPI ROM
JSPI2 Flash EC ROM

7
CN5 SMBUS Connector
LED_LAN1 LAN1 LINK LED Connector
LED_LAN2 LAN2 LINK LED Connector
USB SW1
,
USB SW
2:
USB
p
ower
s
etting
PCIE x16
DESCRIPTION
+5V DUAL 5V DUAL (default)
+5V +5V
Aptio Setup Utility – Copyright (C) 2012 American Megatrends, Inc.
Chipset
Auto Power Button Status [Disabled(ATX)]
Restore AC Power Loss [Last State]
> PCI Express Configuration
> PCI Azalia Configuration
Power Saving Function(ERP) [Disabled]
PCIEX16 Power [1 x16 PCIE]
USB SW1 [+5V DUAL]
USB SW2 [+5V DUAL]
------------------
Version 2.15.1236. Copyright (C) 2012 American Megatrends, Inc.
J_ATX_AT1: AT/ATX mode select switch
PIN NO.
DESCRIPTION
Short 1 - 2 ATX Power Mode (default)
Short 2 - 3 AT Power Mode
J_CMOS
1
:
Clear CMOS button
PIN NO.
DESCRIPTION
NC (default)
Keep CMOS Setup
(Normal Operation)
Press button Clear CMOS Setup

8
VIDEO1: 15-pin Female Connector
PIN NO. DESCRIPTION PIN NO. DESCRIPTION
V1 RED V2 GREEN
V3 BLUE V4 NC
V5 GND V6 GND
V7 GND V8 GND
V9 VCC V10 GND
V11 NC V12 DDCDA
V13 HSYNC V14 VSYNC
V15 DDCCLK
F_PANEL1
:
PWR & RST B
uttons
and
indicators
PIN
DESCRIPTION
P
IN
DESCRIPTION
PWR
LED
1
+5V
2
BEEP_PWR SPKR
3
NC
4
IPMI ID_LED+
IPMI LED
5
GND
6
IPMI ID_LED-
PWR
BTN
7
PWRBTN_SW#
8
PC_BEEP SPKR
9
GND
10
NC
RESET
HDD
LED
11
+5V
12
EXTRST-
13
SATA_LED#
14
GND
MSATA_SW : MSATA
setting
PIN NO.
DESCRIPTION
Short 1 - 2 Auto detect M-SATA (default)
Short 2 - 3 M-SATA Enable

9
DP1: Display port connector
PIN NO. DESCRIPTION PIN NO. DESCRIPTION
1 HPD 11 LANE3N
2 AUXP 12 GND
3 GND 13 GND
4 AUXN 14 LANE0P
5 AUX_CTRL_DET_D 15 LANE1P
6 GND 16 LANE0N
7 GND 17 LANE1N
8 LANE2P 18 +3.3V
9 LANE3P 19 +5V
10 LANE2N
VIDEO1: DVI-I(Dual Link)+CRT
PIN NO. DESCRIPTION PIN NO. DESCRIPTION
C1 RED 10 DVI_DATA1
C2 GREEN 11 GND
C3 BLUE 12 N/C
C4 HS 13 N/C
C5 GND 14 +5V
C6 NC 15 Hot Plug Detect
1 DVI_DATA2# 16 HPDET
2 DVI_DATA2 17 DVI_DATA0#
3 GND 18 DVI_DATA0
4 N/C 19 GND
5 N/C 20 N/C
6 DDC CLK 21 N/C
7 DDC DATA 22 N/C
8 VS 23 DVI_CLK
9 DVI_DATA1# 24 DVI_CLK#

10
LAN2_USB2: RJ45 LAN and USB2.0 Connector
USB2.0 Connector
PIN NO. DESCRIPTION PIN NO. DESCRIPTION
1 VCC 5 VCC
2 USB_DATA- 6 USB_DATA-
3 USB_DATA+ 7 USB_DATA+
4 GND 8 GND
RJ45 LAN
PIN NO. DESCRIPTION PIN NO. DESCRIPTION
L1 TRD2P0 L5 TRD2N2
L2 TRD2N0 L6 TRD2N1
L3 TRD2P1 L7 TRD2P3
L4 TRD2P2 L8 TRD2N3
LAN1_USB1: RJ45 LAN and USB3.0 Connector
USB3.0 Connector
PIN NO. DESCRIPTION PIN NO. DESCRIPTION
1 VCC 10 VCC
2 USB_DATA- 11 USB_DATA-
3 USB_DATA+ 12 USB_ DATA+
4 GND 13 GND
5 USB3_RX- 14 USB3_RX-
6 USB3_RX+ 15 USB3_ RX+
7 GND 16 GND
8 USB3_TX- 17 USB3_TX-
9 USB3_TX+ 18 USB3_TX+
RJ45 LAN
PIN NO. DESCRIPTION PIN NO. DESCRIPTION
20 LAN1_MDI0P 24 LAN1_MDI2P
21 LAN1_MDI0N 25 LAN1_MDI2N
22 LAN1_MDI1P 26 LAN1_MDI3P
23 LAN1_MDI1N 27 LAN1_MDI3N