IEI Technology KINO-780EB User manual

1
Mini-ITX SBC with AMD® ASB1 (BGA) processors, VGA/HDMI/LVDS,
PCIe GbE, USB2.0, SATAII
KINO-780EB
Quick Installation Guide
Version 1.0
Mar. 22, 2010
Package Contents
KINO-780EB package includes the following items:
z1 x KINO-780EB Single Board Computer
z1 x RS-232 cable with bracket
z1 x KB/MS Y cable
z2 x SATA with 5V power cable kits
z1 x Audio cable
z1 x I/O shielding
z1 x Mini Jumper Pack
z1 x Utility CD
z1 x QIG(Quick Installation Guide)
©2006 Copyright by IEI Technology corp.
All rights reserved.

2
Specifications
zCPU :
AMD® Dual core L325 1.5GHz ASB1 (BGA) processor (for
KINO-780EB-L325-R10)
AMD® Single core 210U 1.5GHz ASB1 (BGA) processor (for
KINO-780EB-210U-R10)
zSystem Chipset : AMD RS780E + SB710
zBIOS : AMI BIOS
zSystem Memory :
Two 200-pin 667MHz Dual Channel DDR2 SDRAM SO-DIMM
supported (system max. 4GB for KINO-780EB-L325-R10)
One 200-pin 667MHz Single Channel DDR2 SDRAM SO-DIMM
supported (system max. 2GB for KINO-780EB-210U-R10)
zEthernet : One Realtek RTL8111CP GbE Controller(PCIe x1 Interface)
zI/O Interface :
1 x RS-232/422/485
1 x RS-232
8 x USB 2.0 (2 on rear side, 6 on board by pin header)
4 x SATA II (with 2 x SATA power connector)
1 x PS/2 for KB/MS
1 x CF type II (Optional)
zDisplay Interface :
ATI Radeon HD3200 Graphic core for DX10 support
VGA integrated in the AMD® RS780E (Max. resolution 2560x1600
@32bpp)
HDMI resolution up to 1080p integrated in the AMD® RS780E
18/24bit dual-channel LVDS
zExpansions :
1 x PCI Slot
1 x PCIe mini card slot (PCIe x1 + USB Signal)
zInfrared Interface: 1x Infrared Interface by super I/O ITE IT8718F
zTPM: 2x10-pin pin-header for TPM Module
zDigital I/O :
8-bit digital I/O, 4-bit input / 4-bit output
zSuper I/O : ITE IT8718F
zAudio: Realtek ALC888 HD Audio codec with S/P DIF
zWatchdog Timer :
Software Programmable support 1~255 sec. System reset by Super
I/O: ITE IT8718F
zPower Supply :
Single voltage 12V input
1 x external 4-pin DIN DC jack
1 x internal 4-pin (2x2) power connector

3
zPower Consumption :
3.49A@12V (AMD® Dual core L325 1.5GHz ASB1 processors with two
2GB 667MHz DDR2)
zTemperature : Operation: 0°C ~ 60°C (32°F ~ 140°F)
zHumidity : Operation: 5% ~95% non-condensing
zDimensions : 170mm x 170mm
zWeight : GW: 1000g / NW: 370 g
Ordering Information
KINO-780EB-L325-R10 :
Mini-ITX SBC with AMD® Dual core L325 1.5GHz processors,
VGA/HDMI/LVDS, PCIe GbE, USB2.0, SATAII
KINO-780EB-210U-R10:
Mini-ITX SBC with AMD® Single core 210U 1.5GHz processors,
VGA/HDMI/LVDS, PCIe GbE, USB2.0, SATAII
32100-088600-RS/ 32102-000100-RS/ 32102-000100-200-RS :
SATA Power cable
32100-192900-RS: One 4-pin (2 x 2) to one 4-pin (1x4) DC power cable with
terminal block
32200-026500-RS: RS-232/422/485 cable
CB-USB02-RS:Dual ports USB cable with bracket
TPM-IN01-R10:
Infineon 20-pin Trusted Platform Module with SW Management Tool
TPM-WI01-R10:
Winbond 20-pin Trusted Platform Module with SW Management Tool
WMPCIE-V01-R10: 802.11b+g PCIe mini card wireless LAN module with
Atheros
WMUSB-V01-R10: 802.11b+g USB embedded module with VIA
63000-FSP0601AD101C746-RS: 60W/12V Power Adaptor 90VAC~260VAC,
DIN 4 PIN

4
Jumpers Setting
LABEL FUNCTION
J_CMOS1 Clear CMOS Setup
JP3 AT/ATX Power Mode Setting
JP4 LCD Back Light Voltage Level Selection
JP5 LCD Voltage Selection
UART _SEL1 COM2 RS232 or RS-422 or RS-485 Type Select
JP1 LVDS1 Panel Resolution type select
J_CMOS1: Clear CMOS Setup
CLR_CMOS1 DESCRIPTION
Short 1-2
(default) Keep CMOS Setup (Normal Operation)
Short 2-3 Clear CMOS Setup
JP4: LCD Back Light Voltage Level Selection
JP4 DESCRIPTION
1-2
(default) +5V LVDS
2-3 +3.3V LVDS
JP3: AT/ATX Power Mode Setting
JP3 DESCRIPTION
Short 1-2
(default) ATX Power Mode
Open AT Power Mode
JP5: LCD Voltage Selection
JP5 DESCRIPTION
1-2
(default) +3.3V
3-4 +5V
5-6 +12V

5
UART_SEL1: COM1 RS232 or RS-422 or RS-485
Type Select
UART _SEL1 DESCRIPTION
1-2
(default) RS-232
3-4 RS-422
5-6 RS-485
7-8
9-10 RS-485 with RTS Control
JP1: LVDS1 Panel Resolution type
select
Default: Disable LVDS Panel Resolution
7-8 5-6 3-4 1-2
Open Open Open Open 640x480 18-bit
Open Open Open Short 800X600 18-bit
Open Open Short Open 1024X768 18-bit
Open Open Short Short 1024x768 24-bit
Short Open Open Open 1366x768 24-bit
Open Short Open Short 1280x1024 48-bit
Short Open Open Short 1680x1050 48-bit
Open Short Short Open 1920x1080 48-bit
Open Short Short Short 1920x1200 48-bit

6
Table of Connectors
LABEL FUNCTION
VGA1 VGA 15-pin Female Connector
USB1 External 2 Ports USB Connector
LAN1 RJ-45 LAN Connector
S_ATA1
S_ATA2
S_ATA3
S_ATA4
Serial ATA Connectors
SATA_POWER1
SATA_POWER2 Serial ATA Power Output Connectors
COM1 Internal Serial Port Connector (RS-232/422/485)
COM2 Internal Serial Port Connector (RS-232)
USB2
USB3
USB4 Internal 2 Ports USB Connectors
FRONT-PANEL1 Audio Connector
SPEAKOUT1 External Audio Line-out Connector
SPDIF1 SPDIF Connector
CPU_FAN1 CPU Fan Connector
SYS_FAN1 System Fan Connector
BAT1 +3V Battery Connector
LVDS1 24-bit dual-channel LVDS Panel Connector
INVERTER1 LVDS1 Panel Backlight +12V Main Power Source
connector
PWR1 Adapter DC +12V Main Power Input connector
PWR2 Power Supply DC +12V Main Power Input Connector
JSPI1 Flash BIOS SPI ROM Connector
DIO1 Digital I/O Connector
F_APNEL1 Power button, Rest, HDD & Power LED Indicators
Connector
KB/MS1 PS/2 Keyboard & Mouse Connector
HDMI1 HDMI Connector
MINI-PCIE1 PCIe Mini Card Slot
CF1 CF Card Slot (Optional)
IR1 Infrared Interface connector
PCI1 PCI slot
DIMM1
DIMM2 DDR2 SO-DIMM slot

7
VGA1: 15-pin Female Connector
PIN NO. DESCRIPTION PIN NO. DESCRIPTION
1 RED 2 GREEN
3 BLUE 4 NC
5 GND 6 CRT_PLUG#
7 GND 8 GND
9 VCC (+5V) 10 GND
11 NC 12 DDCDAT
13 HSYNC 14 VSYNC
15 DDCCLK
USB1: External 2 ports USB Connector
PIN NO. DESCRIPTION PIN NO. DESCRIPTION
1 VCC (+5V) 5 VCC (+5V)
2 DATA- 6 DATA-
3 DATA+ 7 DATA+
4 GND 8 GND
LAN1: RJ-45 LAN Connector
PIN NO. DESCRIPTION PIN NO. DESCRIPTION
1 MDIA3- 5 MDIA1+
2 MDIA3+ 6 MDIA2+-
3. MDIA2- 7 MDIA0-
4. MDIA1- 8 MDIA0+
S_ATA1, S_ATA2, S_ATA3, S_ATA4: Serial ATA Connectors
PIN NO. DESCRIPTION PIN NO. DESCRIPTION
1 GND 5 RX-
2 TX+ 6 RX+
3. TX- 7 GND
4. GND 8 N/C
SATA_POWER1, SATA_POWER2: Serial ATA Power Output
Connectors
PIN NO. DESCRIPTION
1 +12V
2 GND
3 GND
4 +5V

8
COM1 : Internal Serial Port Connector (RS-232/422/485)
PIN NO. DESCRIPTION PIN NO. DESCRIPTION
1 DATA CARRIER
DETECT (DCD#) 2 DATA SET READY (DSR#)
3 RECEIVE DATA
(RXD) 4 REQUEST TO SEND (RTS#)
5 TRANSMIT DATA
(TXD) 6 CLEAR TO SEND (CTS#)
7 DATA TERMINAL
READY (DTR#) 8 RING INDICATOR (RI#)
9 GND 10 GND
11 TXD485+ 12 TXD485#
13 RXD485+ 14 RXD485#
USB2, USB3, USB4: Internal 2 ports USB Connectors
PIN NO. DESCRIPTION PIN NO. DESCRIPTION
1 VCC (+5V) 2 GND
3 DATA- 4 DATA+
5 DATA+ 6 DATA-
7 GND 8 VCC (+5V)
FRONT-PANEL1 : Audio Connector
PIN NO. DESCRIPTION PIN NO. DESCRIPTION
1 LINE_OUTR 2 LINEIN_R
3 GND 4 GND
5 LINE_OUTL 6 LINEIN_L
7 GND 8 GND
9 MICIN-R 10 MICIN-L
COM2 : Internal Serial Port Connectors (RS-232)
PIN NO. DESCRIPTION PIN NO. DESCRIPTION
1 DATA CARRIER DETECT
(DCD#) 2 DATA SET READY (DSR#)
3 RECEIVE DATA (RXD) 4 REQUEST TO SEND
(RTS#)
5 TRANSMIT DATA (TXD) 6 CLEAR TO SEND
(CTS#)
7 DATA TERMINAL READY
(DTR#) 8 RING INDICATOR (RI#)
9 GND 10 GND

9
BAT1: +3V Battery Connector
PIN NO. DESCRIPTION
1 BAT (+3.3V)
2 GND
SPEAKOUT1 : External Audio Line-out Connector
PIN NO. DESCRIPTION
1 Line-Out
SPDIF1 : SPDIF Connector
PIN NO. DESCRIPTION
1 +5V
2 N/C
3 SPDIF_OUT
4 GND
5 SPDIF_IN
CPU_FAN1, SYS_FAN1 : Fan Connector
PIN NO. DESCRIPTION
1 GND
2 +12V
3 Rotation Signal
TPM1: Trusted Platform Module connector
PIN NO. DESCRIPTION PIN NO. DESCRIPTION
1 FWHPCLK 2 GND
3 LFRAME# 4 N/C
5 PCIRST# 6 VCC (+5V)
7 LAD3 8 LAD2
9 VCC (+3.3V) 10 LAD1
11 LAD0 12 GND
13 SMBCLK 14 SMBDATA
15 +3.3VDUAL 16 SERIRQ
17 GND 18 CLKRUN#
19 LPCPD# 20 LDRQ#

10
LVDS1: 24-bit dual-channel LVDS Connector
PIN NO. DESCRIPTION PIN NO. DESCRIPTION
1 GND 2 GND
3 A_Y0 4 A_Y0#
5 A_Y1 6 A_Y1#
7 A_Y2 8 A_Y2#
9 A_CK 10 A_CK#
11 A_Y3 12 A_Y3#
13 GND 14 GND
15 B_Y0 16 B_Y0#
17 B_Y1 18 B_Y1#
19 B_Y2 20 B_Y2#
21 B_CK 22 B_CK#
23 B_Y3 24 B_Y3#
25 GND 26 GND
27 VCC_LCD 28 VCC_LCD
29 VCC_LCD 30 VCC_LCD
INVERTER1: LVDS1 Panel Backlight +12V Power Source connector
PIN NO. DESCRIPTION
1 LCD_BKLTCTL
2 GND
3 +12V
4 GND
5 BACKLIGHT ENABLE
PWR1: Adapter DC +12V Main Power Input connector
CN7 DESCRIPTION
1 +12V
2 GND
3 +12V
4 GND
5 GND
PWR2: Power Supply DC +12V Main Power Input Connector
PIN NO. DESCRIPTION PIN NO. DESCRIPTION
1 GND 2 GND
3 +12V 8 +12V

11
DIO1 : Digital Input / Output Connector
PIN NO. DESCRIPTION PIN NO. DESCRIPTION
1 GND 2 VCC (+5V)
3 Output 3 4 Output 2
5 Output 1 6 Output 0
7 Input 3 8 Input 2
9 Input 1 10 Input 0
KB/MS1: 6-pin PS/2 Keyboard/Mouse Connector
PIN NO. DESCRIPTION
1 VCC (+5V)
2 Mouse Data
3 Mouse Clock
4 Keyboard Data
5 Keyboard Clock
6 GND
JSPI1: Flash BIOS SPI ROM Connector
PIN NO. DESCRIPTION PIN
NO. DESCRIPTION
1 SPI_VCC (+3.3V) 2 GND
3 SPI_CS#0 4 SPI_CLK
5 SPI_SO0 6 SPI_SI
7 N/C 8 N/C
F_PANEL1: Power button, Rest, HDD & Power LED
Indicators Connector
PIN NO. DESCRIPTION
1 NC
2 PWRBTN +
3 PWRBTN -
4 HDD LED +
5 HDD LED -
6 PWR LED +
7 PWR LED +
8 PWR LED -
9 RESET+
10 RESET-

12
HDMI1: HDMI Connector
PIN NO. DESCRIPTION PIN NO. DESCRIPTION
1 HDMI_DATA2 13 N/C
2 GND 14 N/C
3 HDMI_DATA2# 15 HDMI_SCL
4 HDMI_DATA1 16 HDMI_SDA
5 GND 17 GND
6 HDMI_DATA1# 18 +5V
7 HDMI_DATA0 19 HDMI_HPD
8 GND 20 HDMI_GND
9 HDMI_DATA0# 21 HDMI_GND
10 HDMI_CLK 22 HDMI_GND
11 GND 23 HDMI_GND
12 HDMI_CLK#
MINI-PCIE1: PCIe Mini Card Slot
PIN NO. DESCRIPTION PIN NO. DESCRIPTION
1 PCIE_WAKE# 2 +3.3V
3 N/C 4 GND
5 N/C 6 +1.5V
7 CLKREQ# 8 LFRAME#
9 GND 10 LAD3
11 CLK- 12 LAD2
13 CLK+ 14 LAD1
15 GND 16 LAD0
17 PCIRST# 18 GND
19 LPC 20 +3.3V
21 GND 22 PCIRST#
23 PERN2 24 3VDual
25 PERP2 26 GND
27 GND 28 +1.5V
29 GND 30 SMBCLK
31 PETN2 32 SMBDATA
33 PETP2 34 GND
35 GND 36 USBD-
37 N/C 38 USBD+
39 N/C 40 GND
41 N/C 42 N/C
43 N/C 44 RF_LINK#
45 N/C 46 BLUELED#
47 N/C 48 +1.5V
49 N/C 50 GND
51 N/C 52 +3.3V

13
CF1 : CF Card Slot (Optional)
PIN NO. DESCRIPTION PIN NO. DESCRIPTION
1 GND 26 GND
2 D3 27 D11
3 D4 28 D12
4 D5 29 D13
5 D6 30 D14
6 D7 31 D15
7 CE# 32 CE2#
8 GND 33 N/C
9 GND 34 IOR#
10 GND 35 IOW#
11 GND 36 WE#
12 GND 37 IRQ
13 +5V 38 VCC
14 GND 39 CSEL#
15 GND 40 N/C
16 GND 41 RESET#
17 GND 42 WAIT#
18 A2 43 INPACK#
19 A1 44 REG#
20 A0 45 BVD2
21 D0 46 BVD1
22 D1 47 D8
23 D2 48 D9
24 N/C 49 D10
25 GND 50 GND
IR1: Infrared Interface connector
CN7 DESCRIPTION
1 VCC
2 NC
3 IR-RX
4 GND
5 IR-TX

14
Board Layout: Jumper and Connector Locations