IEI Technology AFL3-W10A User manual

AFL3-W10A/12A/W15A-BT Panel PC
Page I
User Manual
AFL3-W10A/12A/W15A-BT
MODEL:
Flat Bezel Panel PC with Intel® Celeron® J1900 Quad-Core CPU,
Touchscreen, Dual USB 3.2 Gen 1, Dual GbE LAN,
RS-232, HD Audio, Wi-Fi 802.11a/b/g/n/ac and RoHS
Rev. 1.40 - November 30, 2020
User Manual

AFL3-W10A/12A/W15A-BT Panel PC
Page II
Revision
Date Version Changes
November 30, 2020 1.40 Updated for R14 version
April 8, 2019 1.31 Updated part numbers of panel mount kit and rack mount kit in
Section 2.3
December 11, 2018 1.30 Updated for R13 version – upgraded to anti-glare touch screen
Added E-Window module support list for AFL3-12A-BT and
AFL3-W15A-BT
June 5, 2018 1.08 Modified Pin 1 location of Table 6-24 (RS-232 RJ-45 Serial Port
(COM1) Pinouts)
January 18, 2018 1.07 Added a note regarding P-CAP touch driver in Section 3.16.
March 1, 2017 1.06 Modified the brightness specification of the AFL3-W15A-BT
June 27, 2016 1.05 Added Section 3.15:OS Installation
Updated Chapter 4: BIOS Setup
March 7, 2016 1.04 Added a note in Section 1.6
Updated AFL3-W10A-BT specifications in Section 1.7
September 10, 2015 1.03 Added AFL3-W10A-BT model
July 23, 2015 1.02 Updated the following tables:
Table 6-16: USB 2.0 Connector (HUB_USB1) Pinouts
Table 6-17: USB 2.0 Connector (HUB_USB2) Pinouts
Table 6-19: USB Connector (CAM_USB2) Pinouts
Table 6-20: Webcam Connector (CAM_USB1) Pinouts
June 30, 2015 1.01 Updated the following sections:
Section 3.12.2: Panel Mounting
Section 3.12.3: Cabinet and Rack Installation
June 2, 2015 1.00 Initial release

AFL3-W10A/12A/W15A-BT Panel PC
Page III
Copyright
COPYRIGHT NOTICE
The information in this document is subject to change without prior notice in order to
improve reliability, design and function and does not represent a commitment on the part
of the manufacturer.
In no event will the manufacturer be liable for direct, indirect, special, incidental, or
consequential damages arising out of the use or inability to use the product or
documentation, even if advised of the possibility of such damages.
This document contains proprietary information protected by copyright. All rights are
reserved. No part of this manual may be reproduced by any mechanical, electronic, or
other means in any form without prior written permission of the manufacturer.
TRADEMARKS
All registered trademarks and product names mentioned herein are used for identification
purposes only and may be trademarks and/or registered trademarks of their respective
owners.

AFL3-W10A/12A/W15A-BT Panel PC
Page IV
Manual Conventions
WARNING
Warnings appear where overlooked details may cause damage to the
equipment or result in personal injury. Warnings should be taken
seriously.
CAUTION
Cautionary messages should be heeded to help reduce the chance of
losing data or damaging the product.
NOTE
These messages inform the reader of essential but non-critical
information. These messages should be read carefully as any directions
or instructions contained therein can help avoid making mistakes.
HOT SURFACE
This symbol indicates a hot surface that should not be touched without
taking care.

AFL3-W10A/12A/W15A-BT Panel PC
Page V
Table of Contents
1 INTRODUCTION.......................................................................................................... 1
1.1 OVERVIEW.................................................................................................................. 2
1.2 MODEL VARIATIONS ................................................................................................... 3
1.3 FEATURES................................................................................................................... 3
1.4 FRONT PANEL............................................................................................................. 4
1.5 REAR PANEL............................................................................................................... 5
1.6 BOTTOM PANEL.......................................................................................................... 6
1.7 SIDE PANEL ................................................................................................................ 7
1.8 SYSTEM SPECIFICATIONS............................................................................................ 8
1.9 DIMENSIONS..............................................................................................................11
1.9.1 AFL3-W10A-BT Dimensions.............................................................................11
1.9.2 AFL3-12A-BT Dimensions............................................................................... 12
1.9.3 AFL3-W15A-BT Dimensions............................................................................ 13
2 UNPACKING............................................................................................................... 14
2.1 UNPACKING.............................................................................................................. 15
2.2 PACKING LIST........................................................................................................... 16
2.3 OPTIONAL ITEMS...................................................................................................... 17
3 INSTALLATION ......................................................................................................... 19
3.1ANTI-STATIC PRECAUTIONS...................................................................................... 20
3.2 INSTALLATION PRECAUTIONS................................................................................... 20
3.3 INSTALLATION AND CONFIGURATION STEPS ............................................................. 21
3.4 REMOVING THE BACK COVER .................................................................................. 21
3.4.1 Reinstalling the Back Cover............................................................................. 23
3.5 MSATA MODULE INSTALLATION.............................................................................. 24
3.6 HDD INSTALLATION................................................................................................. 26
3.7 DB-9 SERIAL PORT PIN 9SELECTION....................................................................... 28
3.8 RS-232/422/485 SERIAL PORT SELECTION .............................................................. 29
3.8.1 COM3 RS-422 and RS-485 Pinouts................................................................. 30
3.9 CLEAR CMOS.......................................................................................................... 30

AFL3-W10A/12A/W15A-BT Panel PC
Page VI
3.10AT/ATX MODE SELECTION.................................................................................... 31
3.10.1 AT Power Mode.............................................................................................. 31
3.10.2 ATX Power Mode........................................................................................... 31
3.11 COM1 CONNECTION.............................................................................................. 32
3.12 MOUNTING THE SYSTEM ........................................................................................ 33
3.12.1 Wall Mounting................................................................................................ 33
3.12.2 Panel Mounting.............................................................................................. 36
3.12.3 Cabinet and Rack Installation ....................................................................... 39
3.12.4 Arm Mounting................................................................................................ 43
3.12.5 Stand Mounting.............................................................................................. 45
3.12.6 V-Stand Mounting (10.1” and 12.1” Models Only)....................................... 46
3.13 POWERING ON THE SYSTEM................................................................................... 49
3.14 RESET THE SYSTEM................................................................................................ 50
3.15 OS INSTALLATION .................................................................................................. 51
3.16 SOFTWARE INSTALLATION ...................................................................................... 52
3.16.1 Driver Download........................................................................................... 53
3.16.2 Keypad AP...................................................................................................... 54
4 BIOS SETUP................................................................................................................ 55
4.1 INTRODUCTION......................................................................................................... 56
4.1.1 Starting Setup................................................................................................... 56
4.1.2 Using Setup...................................................................................................... 56
4.1.3 Getting Help..................................................................................................... 57
4.1.4 Unable to Reboot after Configuration Changes.............................................. 57
4.1.5 BIOS Menu Bar................................................................................................ 57
4.2 MAIN........................................................................................................................ 58
4.3ADVANCED............................................................................................................... 60
4.3.1 ACPI Settings................................................................................................... 61
4.3.2 F81866 Super IO Configuration...................................................................... 62
4.3.2.1 Serial Port n Configuration....................................................................... 62
4.3.2.1.1 Serial Port 1 Configuration................................................................ 63
4.3.2.1.2 Serial Port 2 Configuration................................................................ 64
4.3.2.1.3 Serial Port 3 Configuration................................................................ 65
4.3.2.1.4 Serial Port 4 Configuration................................................................ 66
4.3.2.1.5 Serial Port 5 Configuration................................................................ 67

AFL3-W10A/12A/W15A-BT Panel PC
Page VII
4.3.3 F81866 H/W Monitor....................................................................................... 68
4.3.4 RTC Wake Settings........................................................................................... 69
4.3.5 Serial Port Console Redirection ...................................................................... 70
4.3.6 iEi Feature ....................................................................................................... 71
4.3.7 CPU Configuration.......................................................................................... 72
4.3.8 IDE Configuration........................................................................................... 74
4.3.9 USB Configuration........................................................................................... 75
4.4 CHIPSET................................................................................................................... 76
4.4.1 North Bridge Configuration............................................................................. 77
4.4.1.1 Internal IGD Configuration....................................................................... 77
4.4.2 South Bridge Configuration............................................................................. 79
4.4.2.1 PCI Express Configuration....................................................................... 80
4.5 SECURITY................................................................................................................. 81
4.6 BOOT........................................................................................................................ 82
4.7 SAVE &EXIT............................................................................................................ 85
5 SYSTEM MAINTENANCE ....................................................................................... 87
5.1 SYSTEM MAINTENANCE INTRODUCTION .................................................................. 88
5.2ANTI-STATIC PRECAUTIONS...................................................................................... 88
5.3 TURN OFF THE POWER.............................................................................................. 89
5.4 WLAN CARD REPLACEMENT .................................................................................. 89
5.5 REINSTALLING THE COVER....................................................................................... 91
6 INTERFACE CONNECTORS................................................................................... 92
6.1 PERIPHERAL INTERFACE CONNECTORS..................................................................... 93
6.2 INTERNAL PERIPHERAL CONNECTORS...................................................................... 94
6.2.1 Battery Connector (BAT1) ............................................................................... 95
6.2.2 Digital I/O Connector (DIO1)......................................................................... 95
6.2.3 Inverter Connector (INV_CN1) ....................................................................... 95
6.2.4 LVDS Connector (LVDS1)............................................................................... 96
6.2.5 MCU Connector (MCU_CN1)......................................................................... 96
6.2.6 Microphone Connector (DMIC1) .................................................................... 96
6.2.7 PCIe Mini Connector, Full-Size (M_PCIE1)................................................... 97
6.2.8 PCIe Mini Connector, Half-Size (M_PCIE2)................................................... 98
6.2.9 Power LED Connector (PW_LED1)................................................................ 99

AFL3-W10A/12A/W15A-BT Panel PC
Page VIII
6.2.10 SATA Connector (SATA1)............................................................................... 99
6.2.11 SATA Power Connector (SATA_PWR1) ......................................................... 99
6.2.12 Speaker Connector (CN3)............................................................................ 100
6.2.13 SPI Flash Connector (JSPI1)....................................................................... 100
6.2.14 TTL Serial Connector, COM4 (NFC_CN1) ................................................. 100
6.2.15 USB 2.0 Connector (HUB_USB1)............................................................... 101
6.2.16 USB 2.0 Connector (HUB_USB2)............................................................... 101
6.2.17 VGA Connector (VGA_CON1) .................................................................... 101
6.2.18 USB Connector (CAM_USB2)..................................................................... 102
6.2.19 Webcam Connector (CAM_USB1)............................................................... 102
6.3 EXTERNAL INTERFACE PANEL CONNECTORS.......................................................... 102
6.3.1 Ethernet Connectors (LAN1 & LAN2)........................................................... 103
6.3.2 Power Connector (CN5).............................................................................. 103
6.3.3 RS-232 RJ-45 Serial Port (COM1)................................................................ 103
6.3.4 RS-232/422/485 DB-9 Serial Port (COM2)................................................... 104
6.3.5 USB 3.2 Gen 1 Connectors (USB_CON1)..................................................... 104
6.4 PRECONFIGURED JUMPER SETTINGS....................................................................... 104
6.4.1 Backlight Voltage Selection Jumper (J_BL1) ................................................ 105
6.4.2 Inverter Power Selection Jumper (JP2)......................................................... 105
6.4.3 LVDS Panel Voltage Selection Jumper (J_VLVDS1)..................................... 105
6.4.4 Panel PWM Power Selection Jumper (J_ADJ1) ........................................... 106
A REGULATORY COMPLIANCE............................................................................ 107
B SAFETY PRECAUTIONS........................................................................................112
B.1 SAFETY PRECAUTIONS............................................................................................113
B.1.1 General Safety Precautions............................................................................113
B.1.2 Anti-static Precautions ...................................................................................114
B.1.3 Product Disposal............................................................................................115
B.2 MAINTENANCE AND CLEANING PRECAUTIONS .......................................................116
B.2.1 Maintenance and Cleaning.............................................................................116
B.2.2 Cleaning Tools................................................................................................117
C BIOS MENU OPTIONS............................................................................................118
D WATCHDOG TIMER .............................................................................................. 121
E ERROR BEEP CODE............................................................................................... 124

AFL3-W10A/12A/W15A-BT Panel PC
Page IX
E.1 PEI BEEP CODES.................................................................................................... 125
E.2 DXE BEEP CODES ................................................................................................. 125
F HAZARDOUS MATERIALS DISCLOSURE........................................................ 126
F.1 ROHS II DIRECTIVE (2015/863/EU)...................................................................... 127
F.2 CHINA ROHS.......................................................................................................... 128

AFL3-W10A/12A/W15A-BT Panel PC
Page X
List of Figures
Figure 1-1: AFL3-W10A/12A/W15A-BT Flat Bezel Panel PC.......................................................2
Figure 1-2: Front View....................................................................................................................4
Figure 1-3: AFL3-W10A-BT Rear View..........................................................................................5
Figure 1-4: AFL3-12A/W15A-BT Rear View..................................................................................5
Figure 1-5: Bottom Panel...............................................................................................................6
Figure 1-6: AFL3-12A-BT/AFL3-W15A-BT Side View..................................................................7
Figure 1-7: AFL3-W10A-BT Dimensions (mm)...........................................................................11
Figure 1-8: AFL3-12A-BT Dimensions (mm)..............................................................................12
Figure 1-9: AFL3-W15A-BT Dimensions (mm)...........................................................................13
Figure 3-1: AFL3-W10A-BT Back Cover Retention Screws......................................................22
Figure 3-2: AFL3-12A-BT Back Cover Retention Screws.........................................................22
Figure 3-3: AFL3-W15A-BT Back Cover Retention Screws......................................................22
Figure 3-4: Remove the Back Cover...........................................................................................23
Figure 3-5: Internal Locking Mechanism....................................................................................24
Figure 3-6: mSATA Module Slot Location..................................................................................25
Figure 3-7: mSATA Module Installation......................................................................................25
Figure 3-8: HDD Bracket Retention Screws...............................................................................26
Figure 3-9: HDD Retention Screws.............................................................................................27
Figure 3-10: HDD Installation ......................................................................................................27
Figure 3-11: DB-9 Serial Port Pin 9 Setting Jumper Location..................................................28
Figure 3-12: RS-232/422/485 Selection Jumper Location.........................................................29
Figure 3-13: Clear CMOS Button Location.................................................................................30
Figure 3-14: AT/ATX Switch Location.........................................................................................31
Figure 3-15: Serial Device Connector.........................................................................................32
Figure 3-16: Wall-mounting Bracket...........................................................................................34
Figure 3-17: Chassis Support Screws........................................................................................35
Figure 3-18: Secure the Panel PC...............................................................................................36
Figure 3-19: AFL-W10A-BT Cutout Dimensions........................................................................36
Figure 3-20: AFL-12A-BT Cutout Dimensions ...........................................................................37
Figure 3-21: AFL-W15A-BT Cutout Dimensions........................................................................37
Figure 3-22: Panel Mounting Kit Installation .............................................................................38

AFL3-W10A/12A/W15A-BT Panel PC
Page XI
Figure 3-23: Securing Panel Mounting Brackets.......................................................................39
Figure 3-24: Rack/Cabinet Bracket Installation.........................................................................40
Figure 3-25: Rack Mounting Kit Installation ..............................................................................41
Figure 3-26: Securing Rack Mounting Brackets........................................................................42
Figure 3-27: Install into a Rack/Cabinet .....................................................................................42
Figure 3-28: Arm Mounting Retention Screw Holes (10.1”) .....................................................44
Figure 3-29: Arm Mounting Retention Screw Holes (12.1” & 15.6”)........................................44
Figure 3-30: Arm Mounting..........................................................................................................45
Figure 3-31: Stand Mounting (Stand-A/Bxx)..............................................................................46
Figure 3-32: Drill Pilot Holes for V-Stand...................................................................................47
Figure 3-33: Secure V-Stand to System .....................................................................................47
Figure 3-34: Secure V-Stand to Mounting Area.........................................................................48
Figure 3-35: Powering On the System........................................................................................50
Figure 3-36: Reset Button Location............................................................................................50
Figure 3-37: BIOS Option–OS Selection ....................................................................................51
Figure 3-38: IEI Resource Download Center..............................................................................52
Figure 3-39: Keypad AP ...............................................................................................................54
Figure 5-1: WLAN Card Location................................................................................................89
Figure 5-2: Releasing the WLAN Card........................................................................................90
Figure 5-3: Removing the WLAN Card .......................................................................................90
Figure 6-1: Main Board Layout Diagram (Front Side)...............................................................93
Figure 6-2: Main Board Layout Diagram (Solder Side).............................................................93

AFL3-W10A/12A/W15A-BT Panel PC
Page XII
List of Tables
Table 1-1: Model Variations...........................................................................................................3
Table 1-2: Supported E-Window Modules....................................................................................7
Table 1-3: System Specifications................................................................................................10
Table 3-1: DB-9 Serial Port Pin 9 Setting Jumper Settings......................................................28
Table 3-2: RS-232/422/485 Selection Jumper Settings.............................................................29
Table 3-3: RS-422 Pinouts ...........................................................................................................30
Table 3-4: RS-485 Pinouts ...........................................................................................................30
Table 3-5: DB-9 Serial Port (COM1) Pinouts ..............................................................................33
Table 6-1: BIOS Navigation Keys................................................................................................57
Table 6-1: Peripheral Interface Connectors...............................................................................94
Table 6-2: Battery Connector (BAT1) Pinouts...........................................................................95
Table 6-3: Digital I/O Connector (DIO1) Pinouts........................................................................95
Table 6-4: Inverter Connector (INV_CN1) Pinouts.....................................................................95
Table 6-5: LVDS Connector (LVDS1) Pinouts............................................................................96
Table 6-6: MCU Connector (MCU_CN1) Pinouts .......................................................................96
Table 6-7: Microphone Connector (DMIC1) Pinouts .................................................................96
Table 6-8: PCIe Mini Connector (M_PCIE1) Pinouts .................................................................97
Table 6-9: PCIe Mini Connector (M_PCIE2) Pinouts .................................................................98
Table 6-10: Power LED Connector (PW_LED1) Pinouts...........................................................99
Table 6-11: SATA Connector (SATA1) Pinouts .........................................................................99
Table 6-12: SATA Power Connector (SATA_PWR1) Pinouts...................................................99
Table 6-13: Speaker Connector (CN3) Pinouts........................................................................100
Table 6-14: SPI Flash Connector (JSPI1) Pinouts...................................................................100
Table 6-15: TTL Serial Connector, COM4 (NFC_CN1) Pinouts ..............................................100
Table 6-16: USB 2.0 Connector (HUB_USB1) Pinouts............................................................101
Table 6-17: USB 2.0 Connector (HUB_USB2) Pinouts............................................................101
Table 6-18: VGA Connector (VGA_CON1) Pinouts .................................................................101
Table 6-19: USB Connector (CAM_USB2) Pinouts..................................................................102
Table 6-20: Webcam Connector (CAM_USB1) Pinouts ..........................................................102
Table 6-21: Rear Panel Connectors..........................................................................................102
Table 6-22: Ethernet Connectors (LAN1 & LAN2) Pinouts.....................................................103

AFL3-W10A/12A/W15A-BT Panel PC
Page XIII
Table 6-23: Power Connector (CN5) Pinouts...........................................................................103
Table 6-24: RS-232 RJ-45 Serial Port (COM1) Pinouts............................................................103
Table 6-25: RS-232/422/485 DB-9 Serial Port (COM2) Pinouts...............................................104
Table 6-26: USB 3.2 Gen 1 Connectors (USB_CON1) Pinouts...............................................104
Table 6-27: Preconfigured Jumpers .........................................................................................105
Table 6-28: Backlight Voltage Selection Jumper (J_BL1) Settings.......................................105
Table 6-29: Inverter Power Selection Jumper (JP2) Settings ................................................105
Table 6-30: LVDS Voltage Selection Jumper (J_VLVDS1) Settings ......................................105
Table 6-31: Panel PWM Power Selection Jumper (J_ADJ1) Settings ...................................106

AFL3-W10A/12A/W15A-BT Panel PC
Page XIV
List of BIOS Menus
BIOS Menu 1: Main.......................................................................................................................58
BIOS Menu 2: Advanced..............................................................................................................60
BIOS Menu 3: ACPI Settings .......................................................................................................61
BIOS Menu 4: F81866 Super IO Configuration..........................................................................62
BIOS Menu 5: Serial Port n Configuration Menu.......................................................................62
BIOS Menu 6: F81866 H/W Monitor.............................................................................................68
BIOS Menu 7: RTC Wake Settings..............................................................................................69
BIOS Menu 8: Serial Port Console Redirection.........................................................................70
BIOS Menu 9: iEi Feature.............................................................................................................71
BIOS Menu 10: CPU Configuration.............................................................................................72
BIOS Menu 11: IDE Configuration...............................................................................................74
BIOS Menu 12: USB Configuration.............................................................................................75
BIOS Menu 13: Chipset................................................................................................................76
BIOS Menu 14: North Bridge Configuration ..............................................................................77
BIOS Menu 15: Internal IGD Configuration................................................................................77
BIOS Menu 16: South Bridge Configuration..............................................................................79
BIOS Menu 17: PCI Express Configuration ...............................................................................80
BIOS Menu 18: Security...............................................................................................................81
BIOS Menu 19: Boot.....................................................................................................................82
BIOS Menu 20: Save & Exit..........................................................................................................85

AFL3-W10A/12A/W15A-BT Panel PC
Page 1
1 Introduction
Chapter
1

AFL3-W10A/12A/W15A-BT Panel PC
Page 2
1.1 Overview
Figure 1-1: AFL3-W10A/12A/W15A-BT Flat Bezel Panel PC
The AFL3-W10A/12A/W15A-BT series is a quad-core Intel® Celeron® processor J1900
powered flat bezel panel PC with a rich variety of functions and peripherals. The flat-bezel
design is ideal for easy and simplified integration into various applications.
The Intel® Celeron® J1900 is a SoC (System-on-Chip) that ensures optimal memory,
graphics, and peripheral I/O support. The system comes with 2.0 GB of DDR3L SO-DIMM
memory ensuring smooth data throughputs with reduced bottlenecks and fast system
access.
Two serial ports, two external USB 3.2 Gen 1 ports and two external USB 2.0 ports ensure
simplified connectivity to a variety of external peripheral devices. Wi-Fi capabilities and
two RJ-45 Ethernet connectors provide the system with smooth connection to an external
LAN.

AFL3-W10A/12A/W15A-BT Panel PC
Page 3
1.2 Model Variations
There are five models in the AFL3-W10A/12A/W15A-BT series. The model numbers and
model variations are listed below.
Model Size Brightness Touchscreen
AFL3-W10A-BT-J1/PC/2G
10.1" 350 cd/m2Projected capacitive type
AFL3-12A-BT-J1/PC/2G
12.1" 500 cd/m2Projected capacitive type
AFL3-12A-BT-J1/R/2G
12.1" 500 cd/m25-wire resistive type
AFL3-W15A-BT-J1/PC/2G
15.6" 400 cd/m2Projected capacitive type
AFL3-W15A-BT-J1/R/2G
15.6" 400 cd/m25-wire resistive type
Table 1-1: Model Variations
1.3 Features
The AFL3-W10A/12A/W15A-BT features are listed below:
Flat-bezel LCD with LED backlight
Intel® Celeron® processor J1900 (2.0 GHz, quad-core)
Preinstalled with 2 GB of DDR3L memory (system max. 4 GB)
Anti-glare 5-wire resistive type touchscreen or anti-glare/anti-UV projected
capacitive type touchscreen
Wi-Fi 802.11a/b/g/n/ac high speed wireless
Two PCIe GbE RJ-45 connectors
Two internal speakers
Two USB 2.0 ports and two USB 3.2 Gen 1 (5Gb/s) ports
One RS-232/422/485 serial port by D-sub 9 connector
One RS-232 serial port by RJ-45 connector
Optional RFID reader
Optional magnetic stripe card reader
9 V–30 V wide range DC power input
IP 64 compliant front panel

AFL3-W10A/12A/W15A-BT Panel PC
Page 4
1.4 Front Panel
The front side of the AFL3-W10A/12A/W15A-BT is a flat-bezel panel with a TFT LCD
screen surrounded by a PC/ABS plastic frame (Figure 1-2).
Figure 1-2: Front View
There is a power LED indicator located on the front panel. The status descriptions of the
power LED indicator are listed below.
Off: power cord not attached or power supply failure
Solid amber: the system is connected to a power source and is ready to be
turned on.
Solid green: the system is turned on.

AFL3-W10A/12A/W15A-BT Panel PC
Page 5
1.5 Rear Panel
The rear panel provides access to retention screw holes that support VESA mounting.
See Figure 1-3 and Figure 1-4.
Figure 1-3: AFL3-W10A-BT Rear View
Figure 1-4: AFL3-12A/W15A-BT Rear View

AFL3-W10A/12A/W15A-BT Panel PC
Page 6
1.6 Bottom Panel
The bottom panel of the AFL3-W10A/12A/W15A-BT has the following connectors and
switches (Figure 1-5).
Figure 1-5: Bottom Panel
NOTE:
1.
The two USB 2.0 connectors on the bottom panel do not support
wake-up function.
2. Before installing the operating system, the user must enter the Boot
BIOS menu first and choose which operating system will be installed.
Otherwise the USB 2.0 and USB 3.2 Gen 1 ports cannot be used for
OS installation. Please refer to Section 4.6.